Statement of Work.pdf

STATEMENT OF WORK

For

RGV8 Pallet Shuttle Repair

Prepared By:

OC-ALC/OBCA

28 July 2020

2 SoW MFT Contract Name, 28 July 2020

1. SCOPE

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform the Giddings and Lewis RGV8 pallet shuttle repair at the Oklahoma City–Air Logistics Complex (OC-ALC).

2. REQUIREMENTS

2.1. Item Description – OC20578 is a Giddings and Lewis RGV8 pallet shuttle system that is utilized by both Giddings & Lewis (MAG) 5 Axis CNC Mills (OC20576 & OC20577).

The assets are critical to production and cannot operate effectively if the pallet shuttle is down.

On contract FA8126-19-P-A084, the contractor noted that there is a communication issue between the CINCRON cell control system and the MAG CNC Mills. The OE has stated that the CINCRON cell control has not been supported since 22 December, 2017. In order to repair the RGV8 pallet shuttle system, the CINCRON cell needs to be retrofitted with a supportable control system. Due to the criticality of NC equipment, hardware components used for the control system shall be COTS items to lower lead time and expedite repair.

2.2. Upgrade, Installation, Alignment, and Performance Verification – Upgrade, Installation, and Performance Verification of the CINCRON cell control system shall be accomplished within four (4) weeks of delivery of the equipment. The headstocks of OC20576 and OC20577 (MAG HMC-1250) shall be aligned during the upgrade. The Contractor shall provide to the Government Point of Contact (GPOC) the date that the Upgrade, Installation, and Performance Verification will begin five (5) business days prior to installation beginning. The Contractor shall provide the following for Upgrade, Installation, and Performance Verification:

2.3. Training – Not Applicable

3. GENERAL REQUIREMENTS

3.1. Hours of Operation

3.1.1. The Contractor shall perform the work required under this contract during the following days and hours.

3.1.2. Monday through Friday, 0700 -1600 hrs.

3.1.3. These dates and hours exclude federal holidays, base closures due to inclement weather, and furlough days, as applicable.

3.1.4. If work hours are required outside the hours stated, the Contractor shall contact the Government POC for approval from the CO. Upon approval from the CO, the Government Subject Matter Expert (SME) or Government POC must be present with the Contractor.

3.2. Special Qualifications

3 SoW MFT Contract Name, 28 July 2020

3.2.1. The Contractor shall provide personnel with the following special qualifications:

Proof of working on same or similar equipment Proof of any OEM technician training certificates as applicable Calibration qualifications applicable to same or similar equipment Ability to retrieve tech data from machine interface or from external sources.

4. ON-BASE REQUIREMENTS

4.1. Environmental Protection & Safety

4.1.1. The Contractor shall be knowledgeable of and comply with all applicable federal, state and local laws, regulations, instructions and requirements regarding environmental protection and occupational safety and health. The Contractor shall comply with any laws, instructions or regulation changes during the term of this contract.

4.1.2. Contractors shall be compliant Tinker Air Force Base (TAFB) Supplement to Air Force Instruction (AFI) 32-7086, “Hazardous Materials Management”, Tinker AFB procedures per Tinker Air Force Base Instruction (TAFBI) 32-7004, “Hazardous Waste Management”, and Complex procedures per Oklahoma City Air Logistics Complex (OC-ALC) Sup to AFI 32-7086, “Hazardous Material Management” and OC-ALCI 32-101 “Air Quality Record Keeping Procedure”. Publications are available digitally on e-Publishing website at www.e-publishing.af.mil for downloading or ordering.

4.2. Spills

4.2.1. Upon occurrence of any spill that could enter the storm system or cause any harmful environment effects, the Contractor shall immediately call 911 to report the incident.

When possible, the Contractor shall use a base telephone to receive help from Tinker AFB 911.

If using a cell phone, the Contractor shall request Tinker AFB 911. The Contractor shall immediately report all environmental violations to the GPOC and UEC.

4.2.2. The Contractor shall provide five (5) copies of a typed or written report about the incident within four (4) clock hours as follows:

4.2.2.1. One (1) copy to Contracting Officer

4.2.2.2. Two (2) copies to the GPOC

4.2.2.3. One (1) Copy to the UEC

4.2.2.4. One (1) Copy for Record

4.2.3. The format of the report shall be left up to the Contractor, but the report shall contain the following information:

4.2.3.1. Name and contact number of person reporting the spill

4.2.3.2. Date and time of incident

4 SoW MFT Contract Name, 28 July 2020

4.2.3.3. Location and source of spill

4.2.3.4. Substance or pollutant spilled

4.2.3.5. Amount spilled and rate of discharge

4.2.3.6. Any damages or injuries involved

4.2.3.7. Extent of area impacted

4.2.3.8. Potential hazards

4.2.3.9. Actions taken

4.2.3.10. Organizations contacted

4.2.3.11. Remarks Section - that addresses the cause of the spill (e.g. human error, equipment, etc.) and whether 911 was called and which agencies responded.

4.3. Housekeeping - The Contractor shall keep the work areas clean and neat IAW industry standards, OSHA, fire and safety standards, and this SOW.

4.4. Foreign Object Damage (FOD) and Dropped Object Prevention

4.4.1. Contractor personnel who work in or travel though areas near operational and production aircraft, engines, munitions, missiles, drones, space systems, support equipment, Aerospace Ground Equipment (AGE), trainers, and the Contactor personnel operating vehicles and equipment on flight lines, runways, taxiways, parking ramps, and in aircraft hangers and maintenance areas are required to receive the FOD/DOP training and to comply with AFI 36- 2650, AFMC Supplement 1, paragraph 9.2., and A4.4.4. (Initial)/A4.4.5. (Refresher). The Contractor and Contractor personnel shall acknowledge the FOD/DOP training either by viewing the Digital Versatile Disc (DVD) provided by the Government POC or the YouTube site, http://www.youtube.com/watch?v=tYcbodjFPnM.

4.4.2. The Contract Manager shall provide written certification to the Government POC for each employee within ten (10) business days after the contract award date. The certification shall have the title of the training, the name of the person who received the training, and the date of the training. The Contractor shall also ensure all new employees view the FOD/DOP training and provide written certification of training to the Government POC prior to the employees starting work in the OC-ALC shops. Every 36 Months, the Contractor and Contractor personnel shall be required to review the FOD/DOP training and to provide written certification to the Government POC.

4.5 Tool Control and Accountability

4.5.1. While performing contract services in or around Maintenance Production Shops, which includes ramp areas, the Contractor shall comply with AFI 21-101_AFMC Supplement 1, 21-101, Chapter 10 (all paragraphs) and OC-ALCI 21-112, paragraph 14.1. and 14.5.3. The Contractor shall provide the completed MXRIWRS Form 032 prior to performing work in the OC-ALC industrial areas. The MXRIWRS Form 032 is available from the Government POC.

4.5.2. The Contractor shall provide a Contractor Tool Listing, MXRIWRS Form 032, to the Government POC within five (5) business days after (insert type of action, i.e. PM, RM, etc.)

5 SoW MFT Contract Name, 28 July 2020 actions. The Contractor or Contractor’s personnel shall inventory the container or bag of tools at the beginning of each work day and at the end of each work day.

4.5.3. The Contractor personnel shall immediately notify the Government POC of any tools that are missing or lost from the work area or container (e.g. tool or job box or tool bag).

4.5.4. The Government POC will report any missing Contractor’s tools which have not been located within one (1) hour after notification to the appropriate Government personnel. The Contractor shall obtain the Form 32 from the Government POC.

4.5.5. The CM shall ensure each employee on the job site receives a briefing from the Government POC about Housekeeping, FOD/DOP, and Tool Control prior to starting work in OC-ALC Industrial Areas.

4.6. Privately Owned Motor Vehicles (POV): Contractor personnel shall comply with the directives pertaining to operation of POVs on Tinker AFB per AFMAN 31-116, in its entirety, “Motor Vehicle Traffic Supervision”. The Contractor shall comply with Tinker AFBI 24-302, in its entirety for the operation of POVs within Tinker AFB.

4.7. Visitors Pass: The Contractor shall contact the Government POC seven (7) business days before arriving on Tinker AFB in order to make arrangements for Visitors Passes. The Government POC will assign a sponsor for the Contractor from within the organization. The Contractor and the sponsor shall arrange to meet at Pass and Registration, Building 6611 at the Tinker Gate which is South of I-40 off of Air Depot. The Contractor shall provide two (2) forms of identification, one of which shall be a picture ID, to the 72 SFS. The 72 SFS will provide an AF Form 75, Visitors Pass, which will be valid for up to thirty (30) calendar days.

4.8. Foreign Nationals: The Contractor shall notify the Government POC before sending a Foreign National representative to perform services. Special rules apply for foreign nationals visiting a US Government facility.

4.9. Safety and Health on Government Installations: While performing work under this contract on a Government installation, the Contractor shall comply with federal, state and local regulations, and AFI 91-203, “Air Force Consolidated Occupational Safety Instruction”, as established by this contract and Appendix C. The Contractor shall notify the CO, Government POC, and Government Contract Administrator (CA) within one (1) business day of any injuries that occur to contractor personnel while they are on the installation. The Contractor shall notify the CO, Government POC, and Government CA within one (1) business day of damage to Government property or equipment during the execution of the contract.

4.10. Emergency Procedures: The Contractor personnel shall follow the direction of the Government personnel with regard to emergency procedures, such as fire, tornado, active shooter, bomb threats, or other emergency. It is the responsibility of the Contractor to provide guidance and to establish procedures for its employees to respond to an emergency. It is the Contractor’s responsibility to account for their employees following an emergency evacuation.

6 SoW MFT Contract Name, 28 July 2020

The Contractor personnel shall participate with the Government personnel in all fire and tornado drills at no additional cost to the Government.