Statement of Work-2125405Y6175K93006.doc
DOC document 67 KB Posted
- Attached to
- Dust Collector Rental
- Solicitation number
- 70Z04025Q61035Y00
About this file
This Statement of Work (SOW) details a U.S. Coast Guard requirement for a 55,000 CFM Tier III diesel-powered dust collection unit rental for blasting exterior surfaces of an 87' vessel at the USCG Yard in Baltimore, Maryland. The rental period is 4 consecutive weeks between August 27, 2025, and October 1, 2025, with a firm fixed price. The equipment specifications include a trailer-mounted unit with specific requirements such as four 300-foot duct hoses, a reverse pulse jet system, auger dust removal, pneumatic vibrators, and fuel tanks. The contractor must provide on-site maintenance, with a mechanic available 7 days a week and the ability to repair or replace equipment within 8-48 hours of any mechanical issues.
The solicitation is being conducted under simplified acquisition procedures with a best value award approach. Quotes are due by September 30, 2025, at 11:59 PM Eastern, to be submitted via email to Courtney.J.Brown@uscg.mil. The U.S. Coast Guard Surface Forces Logistics Center intends to award a firm fixed-price purchase order, with payment made net 30 days after order acceptance. Vendors must demonstrate technical compliance, meet specified deadlines, and be prepared to assume financial responsibility until the order is fully accepted by the Coast Guard.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| (UPDATED) 70Z04025P61035Y00 - Solicitation - Services.docx | DOCX document | |
| Smart Matrix Acquisition.GOV.pdf | ||
| 70Z04025P61035Y00 - Solicitation - Services.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK P/R: 2125405Y6175K93006
POC: Paint Shop Foreman Keith Jordan
Cell: (410) 636-4776
Email: keith.a.jordan@uscg.mil
Ship Superintendent Keith Hare Cell: (410) 636-7603 Email: keith.f.hare@uscg.mil
Location: USCG Yard, 2401 Hawkins Point Rd, Baltimore, MD 21226
1. GENERAL REQUIREMENTS: The work consists of providing equipment as required IAW the description below. Located at 2401 Hawkins Point Road Baltimore MD 21226 87’ Vessel.
1.1 Government intended use is for blasting exterior surfaces of Coast Guard 87’ vessel while in an enclosed tent. The work will include blasting operations of the entire exterior surfaces of the vessel. Normal damage caused by the above work task will be at no cost to the Government. Rental will be at a firm fixed price regardless of the hours used. Any damage found outside normal wear and tear must be presented to the Contracting Officer for approval prior to repair work being completed.
2. COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK: Upon acceptance the contractor shall provide the equipment for 4 consecutive weeks sometime between 08/27/25 and 10/1/25. Final period of performance will be determined by the Yard POC / Ship Superintendent.
3. Description of Equipment: Description: 55,000 CFM Tier III 174 horsepower diesel powered unit. An inspection report finding the equipment to be in good working order must be completed prior to delivery & forwarded to the Contracting Officer.
· (1) 55,000 CFM Tier III 174 Horsepower diesel powered unit – Contractor must supply four 300 foot long 20-inch diameter duct hoses, The collector must have a reverse pulse jet system, auger system for removing dust and debris, and hopper mounted pneumatic vibrators. A flexible discharge hose and drum cover must be included for use with a 55-gallon drum. Unit must be trailer mounted with two 80 or greater gallon fuel tanks. The contractor is responsible for all maintenance and repairs during the rental period. If at any point during the rental period, the unit(s) should have a mechanical or performance issue the Contractor must provide a mechanic for repair 7 days a week upon notice from the government. Repair must be made within eight (8) hours of notice. If unable to repair, the contractor shall provide a replacement within 48 hours. The collection unit provided must have been manufactured 5 years of the contract date.
4. Delivery: Equipment must be delivered to the USCG Yard 2401 Hawkins Point Road Baltimore Maryland 21226. Bldg 80 (paint shop) location between 7:00am and 9:00am. Access to the Yard during the rental period is coordinated through the Yard POC. All personnel shall receive visitors’ passes and clearance from USCG Coast Guard Yard Security located at the Main Gate. A list of personnel requiring access shall be provided to the Yard POC twenty-four (24) hours prior to requiring access. Personnel will be required to provide full name, picture I.D. (valid driver’s license preferred), and date of birth. For Non-US citizen’s, a passport will be required. The following forms of IDS are authorized: CAC, Foreign Passport containing appropriate visas, TWIC, Green Cards, US Passport, or MOST state IDs.
5. Pick Up: Request automatic pick up after 4 weeks unless optional days are authorized by the Contracting Officer. Only the Contracting Officer may modify the contract. A contract modification must be executed prior to an extension occurring.
6. Schedule Period: 4 consecutive weeks sometime between 08/27/25 & 10/1/25. The final period of performance will be determined by the Yard POC / Shop Superintendent.
7. Damage to Government Property: The Contractor shall be held liable for any damage to government property caused by the Contractor. Any concerns must be brought to the attention of the POC.
6. DEFINITIONS and Acronyms: NA
8. CONTRACT DEFINITIONS:
1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.
2. CONTRACTING OFFICER. A person with authority to enter, administer, and/or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.
3. Hard Hats: The Contractor shall have the employee’s name, as it appears on identification card, designated on the front and the Company’s name on both sides. The lettering shall be standard commercial lettering (not hand printed), no less than ½ inch in height for the Company’s name and no less than 3 /8” in height for employee’s name. Lettering color is to be black.
9. ORAL MODIFICATION: No oral statement of any person other than the contracting officer shall in any manner or degree modify or otherwise affect the terms of this contract.
File details come from the government source that posted it. Updated .