Statement of Requirements_SOR_for Pickup Shell Cap and Cargo Glide Slide Procurement and Installation.pdf

STATEMENT OF REQUIREMENTS FOR THE INSTALLATION

OF PICKUP SHELL CAPS AND CARGO GLIDE SLIDES

Joint Task Force – Civil Support

Fort Eustis, VA 23604

1. Procure and install one (1) High Rise Cargo Bed Shell Cap (Model A.R.E. TW or equivalent…see

Figure 1 below) AND one (1) Cargo Glide (Cargo Glide Model #CG1500XL-9548 with 1,500 pound capacity or equivalent…see Figure 2 below) for each of six (6) 2020 Dodge Ram 3500HD Crew Cab pickup trucks (single rear wheel) with 8-foot cargo beds.

2. Procure and install one (1) High Rise Cargo Bed Shell Cap (Model A.R.E. TW or equivalent…see

Figure 1 below) AND one (1) cargo glide (Cargo Glide Model #CG2200XL-9548 with 2,200 pound capacity or equivalent…see Figure 3) for one (1) 2020 Dodge Ram 3500HD Crew Cab pickup truck

(single rear wheel) with an 8-foot cargo bed.

3. Shell caps for all seven (7) pickups must be:

a. Compatible with 2020 Dodge Ram 3500HD Crew Cab Pickup (single rear-wheel), 8ft cargo bed

b. Fiberglass construction, and white in color (must match vehicle paint)

c. Securable by key

d. Have a minimum height of approx. 30 inches to accommodate equipment stowage.

e. See-through, lightly-tinted windows on all sides.

4. Cargo Glide Slides must be capable of full extension.

5. Contractor will provide all labor, parts, and tools needed to install both the cargo bed caps/shells and the cargo bed slide/glides on all seven (7) Dodge Ram 3500HD Crew Cab Pickup Trucks.

6. Once shell caps and cargo slides arrive at vendor for installation, vendor must be able to complete installation no later than two (2) business days after turn-in of each pickup.