Statement of Requirement MXG Laser Machine 2023.docx
DOCX document 26 KB Posted
- Attached to
- 187 MXG Laser Engraving Machine Federal contract opportunity
- Solicitation number
- W50S6N23Q0010
About this file
This statement of requirement outlines a need for a dual source laser engraving machine by the 187th Maintenance Group of the 187th Fighter Wing located in Montgomery, Alabama. The machine must include both CO2 and fiber laser capability within a 24" x 24" x 9" work area, with a 2" 60 watt CO2 laser and 3" 30 watt fiber laser. It must also include 2 overhead cameras, wireless connectivity, and engraving resolution between 75-1200 dpi. The machine and all included items and software must be delivered by the specified delivery date to the stated address, where a government representative will inspect and accept the delivery. The standard manufacturer's warranty is required for all equipment.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| COMBO W50S6N23Q0010.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF REQUIREMENT
FOR
MXG Laser Engraving Machine
1. General Information
New requirement for a laser engraving machine to be used to engrave all tools, test equipment, dash 21 equipment, and personnel protective equipment with the required markings. All newly aquired tools and equipment that accompany the F-35 aircraft will require application of the unit’s EID per DAFI21-101. The vendor will furnish the identified products in Paragraph 2 to the 187th Maintenance Group, 187th Fighter Wing located in Montgomery, Alabama.
2. Baseline Requirements Standards
2.1. CLIN0001: (1 ea) Dual source laser machine. The machine shall include the following items and meet the listed characteristics in order to be approved for use:
1 - Dual source laser machine (with software suite) that has both CO2 and fiber laser capability and has the following characteristics/items included:
· 24” x 24” x 9” work area
· 2” 60 watt CO2 laser
· 3” 30 watt fiber laser
· 2 overhead cameras
· Wireless connectivity
· 75-1200 dpi
· 1 GB internal memory
· Grid cutting table
· Task plate table
Delivery, Inspection and Acceptance
Place of Delivery: 187FW/MXG Attn: SMSgt John Helms 5187 Selma Hwy Montgomery, AL 36108
Inspection and acceptance will occur at time of delivery by a Government representative. A comprehensive bill of lading or delivery receipt shall accompany deliverables that details, at minimum, all kit contents with part/serial numbers.
Government Furnished Equipment (GFE) or Property (GFP)
(IDENTIFY APPLICABLE OR KEEP THE STATEMENT AS IS) The Government will not provide equipment or property for these items.
Warranty
All equipment shall have the standard manufacturer’s warranty.
The Contractor shall warrant all equipment manufactured and delivered and ensure all items are free from defects in material and workmanship under normal use and service and, without charge, repair or replace any equipment found to be defective in material or workmanship provided said equipment has been operated within standard procedures and instructions and such defects are not due to abuse, misuse or Acts of God.
The Contractor shall provide all items’ original, unopened packaging with each device.
File details come from the government source that posted it. Updated .