Statement of Need BSERV Mast Camera.docx
DOCX document 20 KB Posted
- Attached to
- Sources Sought-Mast Camera
- Solicitation number
- F2Z3C54221AW01
About this file
This document is a Statement of Need for a Bomb Squad Emergency Response Vehicle (BSERV) mast camera to be installed on a vehicle at McConnell Air Force Base in Kansas.
The Statement of Need requires the contractor to provide at least one surveillance camera that can pan, tilt, and zoom, and can function in various weather conditions. The camera output must be routed to pre-existing monitors inside the vehicle, or a contractor-provided monitor. The installation should include all necessary components for the camera to operate from inside the vehicle. The contractor must complete the installation within 120 calendar days after being awarded the contract and provide an overview and familiarization of the installed systems. This requirement is associated with a pre-solicitation for a Mast Camera, posted by the Department of the Air Force's Air Mobility Command.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
8 August 2024
Statement of Need
Bomb Squad Emergency Response Vehicle (BSERV) Mast Camera
McConnell AFB, Kansas
1. Overview
1.1 The 22nd CES/CED requires a mast camera to be installed on its emergency response vehicle for scene situational awareness during an explosive threat.
2. Description
2.1 The contractor shall provide at least one surveillance camera with installation on our vehicle’s pre-existing extendable mast with the following conditions.
2.1.1 Camera must be able to pan, tilt and zoom as controlled by an operator.
2.1.2 Camera and connections must be able to reasonably function in all weather conditions commonly found in the state of Kansas to include high winds, snow, and rain.
2.1.3. Camera output must route to pre-existing monitors inside the vehicle, or one provided by the contractor that does not interfere with operations inside the vehicle.
2.1.4. Installation should include all necessary components for the camera to operate from inside of the vehicle
2.1.5. Headsets must have Federal Aviation Administration (FAA) Technical Standard Order (TSO) approval.
2.1.6 Camera must work on vehicle supplied power be able to be turned off and on independently from the vehicle engine so that the camera does not automatically turn on when the vehicle does.
2.1.7. Contractor should provide overview of work done and familiarization with installed systems.
4. Delivery
4.1 The contractor shall complete installation no later than 120 calendar days after being awarded the contract.
File details come from the government source that posted it. Updated .