STARCOM Emblem Salient Characteristics.pdf
PDF 66 KB Posted
- Attached to
- STARCOM Emblems
- Solicitation number
- FA255022Q0036
View the file
Other files
| File | Type | Posted |
|---|---|---|
| STARCOM Emblem.png | PNG image | |
| 4 TES Emblem.png | PNG image | |
| USSF Seal.png | PNG image | |
| 12 DOS Emblem.png | PNG image | |
| Combined Synopsis-Solicitation.pdf | ||
| 3 TES Emblem.png | PNG image | |
| Delta 12 Emblem.png | PNG image | |
| 17 TES Emblem.png | PNG image | |
| 1 TES Emblem.png | PNG image | |
| 14 TS Emblem.png | PNG image |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
StarCom Emblem Salient Characteristics
These are the minimum requirements to which the emblems should meet:
All the emblems should be made from cold rolled steel.
Between 4 and 10 layers
All emblems should be shape matched to the drawings provided with the longest edge measured 30 inches in length.
All emblems should be 1-3 inches thick.
All emblems should be color matched to the drawings provided in anodized/ shiny clear coat vs a matte finish.
The completed emblems should be ready to hang with two attachment points welded to the back.
Bolts and nuts holding the assembly together.
QTY (4) DEL 12
QTY (4) 12 DOS
QTY (1) USSF Seal
QTY (1) STARCOM
QTY (1) 1 TES,
QTY (1) 14 TS
QTY (1) 17 TES
QTY (1) 3 TES
QTY (1) 4 TES
File details come from the government source that posted it. Updated .