SRC28201.Welded_Gate_Description_Barbour_2025FY.pdf
PDF 213 KB Posted
- Attached to
- Conservation/WL/Barbour WMA- Steel Gate
- Solicitation number
- SRC0000028201
- Issued by
- Barbour County, Alabama
About this file
This document is a detailed specification for welded gates for the Barbour County Wildlife Management Area (WMA) located in Midway, Alabama. The specification calls for the procurement of 5 identical gates, each 16 feet long, constructed from 2½" square tubing that is ¼" thick. The gates feature specific design elements including a locking side with a 10"x2½"x¼" plate, an off-centered hole for lock shackle insertion, a 3' long round pipe on the swivel side, diagonal and vertical support bars, and a 4" square tube locking pole with specific dimensions and configurations. The gates are to be painted safety yellow and will be delivered to 188 Christa Drive, Midway AL 36053.
The pricing is structured on a per-gate basis and includes delivery, with no installation required. The specification includes a detailed schematic diagram that provides precise measurements and welding instructions for fabrication. The gates will undergo SP3 cleaning, and each gate includes a 3" round swivel pole that is 7'6" long, with 4' below ground and 3' above ground, and a cap or welded plate to prevent lifting. The document appears to be part of a procurement process for specific infrastructure improvement or access control for the Barbour County Wildlife Management Area.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Quick_Quote_Standard_Boilerplate_updated_12.18.2024.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Barbour County WMA Welded Gate Description:
5 Gates per specs and diagram:
- 16’ long welded gate made from 2 ½” square tubing that is ¼” thick.
- The locking side of the gate needs to have a 10”x2 ½”x¼” plate welded onto the end of the 16’ square tube with a ½” hold cut into it.
- The hole needs to be off centered to allow for a lock shackle to be inserted.
- The swivel side of the gate needs to have a 3’ long round pile welded to it that is just large enough to slide over the 3” pipe that is the swivel pole.
- There needs to be a 12’ long support bar made from 2 ½” square tube welded diagonally from the 16’ square pipe to the base of the 3” swivel side.
- There also need to be a vertical support made from 2 ½” square tube welded to the 12’ support and the 16’ square tube.
- The locking pole should be made from 4” square tube that is 6’ long and ¼” thick with a plate welded to the top.
- The pole needs to have a 6”x7”x¼” square tube welded onto one for the sides flush with the top of the pole.
- There needs to be a 5”x¾” gap cut into the box to allow gate to be locked.
- The swivel pole of the gate should be made from 3” round pipe that is 7’6” long.
- The below ground portion should be 4’ long and the above ground section should be 3’ long.
- There need to be a cap or welded plate attached to prevent the gate from being lifted off the swivel pole.
- The gates should be painted safety yellow.
- SP3 cleaning of gates and posts
- Attached is a schematic for the gates.
- Delivered to Barbour WMA , 188 Christa Drive, Midway AL 36053.
- Price is per gate and includes delivered price.
- No installation needed
File details come from the government source that posted it. Updated .