SRC27351.GATES-AWMA_Specs__2_.pdf
PDF 114 KB Posted
- Solicitation number
- SRC0000027351
- Issued by
- Autauga County, Alabama
About this file
This is a technical specification document for a custom welded gate procurement by an agency in Prattville, Alabama. The solicitation calls for 10 custom welded gates that are 16 feet long, made from 2 1/2" square tubing with 1/4" thickness, featuring specific locking mechanisms, swivel poles, support bars, and powder-coated yellow finish. Additionally, the procurement includes 8 trailer bands measuring 1/4" H x 3" W x 8'L.
The vendor must comply with Build America, Buy America Act (BABA) requirements and complete a Certificate of Compliance. Delivery terms specify that if the vendor is located within 50 miles of 2119 Co. Rd. 57 Prattville, AL 36051, WMA staff will pick up the gates; otherwise, delivery costs must be included in the price. No specific pricing terms or funding information is provided in the document.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Custom Welded Gate Description:
• 16' long welded gate made from 2 1/2" square tubing that is 1/4" thick.
• The locking side of the gate needs to have a 10"x2 ½”x ¼” plate welded onto the end of the 16' square tube with a 1/2" hold cut into it.
• The hole needs to be off-centered to allow for a lock shackle to be inserted.
• The swivel side of the gate needs to have a 3' long round pile welded to it that is just large enough to slide over the 3" pipe that is the swivel pole.
• There needs to be a 12' long support bar made from 2 1/2" square tube welded diagonally from the 16' square pipe to the base of the 3" swivel side.
• There also need to be vertical support made from 2 1/2" square tube welded to the 12' support and the 16' square tube.
• The locking pole should be made from a 4" square tube that is 6' long and 1/4" thick with a plate welded to the top.
• The pole needs to have a 6"x7"x1/4" square tube welded onto one for the sides flush with the top of the pole.
• There needs to be a 5"x3/4" gap cut into the box to allow the gate to be locked.
• The swivel pole of the gate should be made from 3" round pipe that is 7 '6" long.
• The below-ground portion should be 4' long and the above-ground section should be 3' long.
• There needs to be a cap or welded plate attached to prevent the gate from being lifted off the swivel pole.
• The gate should be powder-coated yellow.
• QTY 10
SEE Attached schematic for the gates.
Trailer Bands
• ¼” H x 3” W x 8’L
• Quantity 8
If vendor is located within 50 miles of 2119 Co. Rd. 57 Prattville, AL 36051, then gates will be picked up by WMA staff. If not, please include delivery in price.
Items must be BABA compliant AND Vendor must complete Certificate of Compliance for BABA (Build America, Buy America ACT). These forms are attached the to solicitation.
File details come from the government source that posted it. Updated .