SRC21902.Tag_Info.pdf

Small Fish Tags

FINGERLING FTF-69 �

For 4" - 6" fish, complete with 1/4" x 1/8" oval, vinyl stretchable thread, needle and numbered pennant.

Two sided printing available.

FTSL-73 STREAMER

This polyethylene tag can be used as a lip tag on fish 6" or less, and on small mouth bass which do not tolerate dorsal tags. Each tag comes complete with a glue-attached needle which is pulled through until the cut part is centered.

Specify your color preference, several available. Streamer floats and slides when used on shrimp, lobster or crab.

Medium Fish Tags s""_,.

F

M m

-8 f--F•M

-8 i!ll

9S g;

L-!!!!!!!!--!!!!!9=

Di_, FM-95W icr--

T-BAR EXTRA SMALL ANCHOR FF-94

Total length is 1 ½". Our smallest diameter Shrink-Lock™ tag with colored polyolefin tubing. The printing is pro tected by clear polyolefin. This tag is applied with the Fine Fabric gun.

SMALLEST T-BAR ANCHOR FD-68B FF

This is our smallest I-bar tag. It consists of monofilament covered with vinyl tubing. It has many length options and is applied with a Fine Fabric gun.

T-BAR ANCHOR

I-Bar Anchor Tag works well with medium and small size fish. It is applied with the tagging gun appropri ate to the monofilament being use. The tag is inserted below the dorsal fin. It is also available in Heavy Duty or Fine Fabric monofilament. These tags come in cartridges of 50 tags and are intended to be used in a high speed tagging operation. They can be printed on both sides.

FD- 94 Printing is on colored polyolefin tubing protected by clear polyolefin Shrink-Lock™ with a very small total diameter.

FD- 68B T his tag is the original T-Bar, vinyl tubing with monofilament through it.

FD-67F Flag Anchor Tag. Standard size is 3". It is monofilament without tubing. Many colors available.

LAMINATED INTERNAL ANCHOR

Ideal for marking fresh and saltwater fish. Especially useful on fish which do not tolerate a dorsal tag well. This can be produced with or without the shrink covering over the tubing portion. It is applied one at a time through an incision into the body cavity behind the pectoral fin and has very good retention. The laminated anchor and the tubing streamer protion can both be printed. Especially recommended for bass.

FM-84: Vinyl Tubing attached to Laminated Anchor Disc FM-89SL:Laminated Anchor Disc attached to monofilament covered with printed vinyl tubing, protected by Shrink-Lock™

FM-95W: Colored Polyetholin tubing over Stainless Steel Wire Core.

Protected by Shrink-Lock™ and attached to Laminated Anchor Disc

_4 ------------�-------------

Tricia.Mikkelsen Highlight

Tricia.Mikkelsen Highlight

Tricia.Mikkelsen Highlight

Six Different Guns for Corrosion Resistant Tagging Systems

SCISSOR GRIP

MARK II LONG

SUPER HEAVY DUTY

SCISSOR GRIP

• Insertion depth is 1 1/8"

• Requires super heavy duty needles and super heavy duty I-bar tags

• Comes with super heavy duty needle

• .090" OD

MARK II REGULAR

SCISSOR GRIP

• Maximum insertion depth is 5/8"

Uses a regular duty or a heavy duty needle

• Comes with a regular needle

• .077" OD

MARK II REGULAR

STAINLESS STEEL

SCISSOR GRIP

• Maximum insertion depth is 5/8"

• Uses a regular duty or a heavy duty needle

• Has stainless steel internal parts and a stainless steel needle lock

• Comes with a regular heavy duty needle.

• .077OD

MARK II LONG

PISTOL GRIP

• Insertion depth is 1 1/8"

• Uses light duty, regular duty or heavy duty long needles. Longer projection rod of this gives a better angle and greater depth

• Comes with a long regular needle

• .077" OD

MARK III REGULAR

PISTOL GRIP

• Maximum insertion depth is 5/8"

• Uses regular duty or a heavy duty needles

• Comes with a regular needle

• .077OD

MARK II FINE FABRIC

PISTOL GRIP

• Maximum insertion depth is 3/8"

• Uses a regular duty needle

• Can only be used with fine fabric tags

• Comes with a fine fabric needle

• .052" OD

PISTOL GRIP

f?C::::?, Fine Fabric Needle

Regular Needle

Regular Heavy Duty Needle

-<tC������

§f73�� Long Regular Needle

<C ::: ?C?J

Super Heavy Duty Needle

Please Note:

1. To have tubingjlush on the fish, order 3/8" monofilamentfor Fine Fabric Gun, 5/8" monofilamentfor any of the Regular Guns, and l II for the Long Guns.

2. Gun repairs are done on the premises in seven days.

-------------�---------------7

Tricia.Mikkelsen Highlight

Tricia.Mikkelsen Highlight