0045.pdf

ITEM DESCRIPTION

NSN

1650006265728

CAGE

82402

REFERENCE NUMBER

1855E95

NOUN

DISC,BRAKE

END ITEM TCTO NUMBER TO NUMBER

4BA8-5-3

CRITICALITY CODE

X

DEMILITARIZATION CODE

B

SECURITY CODE

U

MDC

EFB

ES CODE

PK

REMARKS

INITIATOR

NAME

RONALD.E.RICHWALSKI

ORGANIZATION / OFFICE SYMBOL

423 SCMS / GUMBB

DSN PHONE

336-3018

COMMERCIAL PHONE

405-736-3018

ITEM DESCRIPTION DATA

LENGTH ( IN )

14.5000

WIDTH ( IN )

14.5000

HEIGHT ( IN )

16.5000

WEIGHT ( LB )

15.0000

OTHER DIMENSIONS

ITEM MATERIAL

steel, aluminum, and rubber products

ITEM FUNCTION

senses the position of the flaps and locks them before they can exceed 8 degrees of deflection

SAFETY CRITICAL SCREW

THREADED COMPONENT

ESD CEMS SENSITIVE DATA

STATEMENT OF HELIUM CONTENT (%) 0 PRECIOUS METAL INDICATOR CODE

GFM REQUIRED GFE REQUIRED GFP REQUIRED

JEWEL BEARING JEWEL BEARING RELATED

LEGACY ITEM DESCRIPTION

WING FLAP EMERGENCY BRAKE ASSY C13ODIMENSIONS: APPROX 12 IN LG 6 IN HGKIND OF MATERIAL: STEEL AND ALUMINUFUNCTION: SENSES

FLAP ASYMMETRICAL CONDITION BEFORE IT EXCEEDS 8 DEGRE

Page 1 of 1ITEM DESCRIPTION Version 1Generated by PRPS using Jasper Reports on 26 Sep 2018

DATE

SUPPLEMENT TO AFLC FORM 761 20120607

NOUN NATIONAL STOCK NUMBER PART NUMBER

Servovalve, Hydraulic 1650-00-626-5728 1855E95

Only the checked statement applies to this NSN.

QUALIFICATIONS REQUIREMENTS PRIOR TO 19 OCT 84

• Section F.1 This item qualifies under FAR 9.206-1(a)(2) and the requirements of FAR 9.202(a) are not applicable.

Prequalification of sources is essential to maintain high quality and maximum operational safety.

• Section F.2

(a) _____Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufactures that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item.

(b) __X__ Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufactures that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item.

(c) _____ Qualification requirements are set forth in OC-ALC Source Approval Information Booklet.

Category III capability is permissible.

• Section F.3 The provisions of FAR 9.206-1 and -2, as supplemented, apply. In accordance with AFMCFARS, 1 July 97, Part 5309.206-1(e)(1), Notes A and B apply. Qualification requirements were established prior to 19 Oct 84.

QUALIFICATION REQUIREMENTS AFTER 19 OCT 84

Justification for Qualification Requirement (JQR) is required.

• Section F.1 Prequalification of sources is essential to maintain high quality and maximum operational safety. The requirements of FAR 9.202(a) apply.

• Section F.2 (a)_____ Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufactures that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item.

(b)_____ Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers, that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item.

• Section F.3 The provisions of FAR 9.206-1 and -2, as supplemented, apply. In accordance with AFMCFARS, 1 July 97, Part 5309.206-1(e)(1), Notes A and D apply. Qualification requirements were established after 19 Oct 84.

EVALUATING ENGINEER/TECHNICIAN (Signature) SYMBOL EXTENSION

//Signed//Jose Berrios 423SCMS/GUEA 734-7757

OC-ALC Form O-367, JUN 01 (TI)

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

1650006265728

VERSION NUMBER

NOUN

DISC,BRAKE

INITIATOR

KISSICK, CHRISTOPHER M

ORGANIZATION CODE / OFFICE SYMBOL

423 SCMS / GUEA

COMMERCIAL PHONE

405-734-7834

DSN PHONE

884-7834

CAGE / REFERENCE NUMBER

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Data Plate

MARKING METHOD

Data Plate

DESCRIPTION / LOCATION

IUID information can be included on existing data plate per the engineering drawing

REMARKS

Kerstetter, Sean MNAME: 07 MAR 2017DATE:

N/A

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 1650006265728

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 26 Sep 2018

ITEM DESCRIPTION

NSN

1650012177899

CAGE

56231

REFERENCE NUMBER

27620-1

NOUN

DISC,BRAKE

END ITEM TCTO NUMBER TO NUMBER

16C1-4-23-3

CRITICALITY CODE

F

DEMILITARIZATION CODE

B

SECURITY CODE

U

MDC

EFB

ES CODE

PK

REMARKS

INITIATOR

NAME

RONALD.E.RICHWALSKI

ORGANIZATION / OFFICE SYMBOL

423 SCMS / GUMBB

DSN PHONE

336-3018

COMMERCIAL PHONE

405-736-3018

ITEM DESCRIPTION DATA

LENGTH ( IN )

14.5000

WIDTH ( IN )

14.5000

HEIGHT ( IN )

16.5000

WEIGHT ( LB )

15.0000

OTHER DIMENSIONS

ITEM MATERIAL

steel, aluminum, rubber

ITEM FUNCTION

Senses flap asymetrical conditions before it exceeds 8 degrees and locks flaps in this position before further travel can occur.

SAFETY CRITICAL SCREW

THREADED COMPONENT

ESD CEMS SENSITIVE DATA

STATEMENT OF HELIUM CONTENT (%) 0 PRECIOUS METAL INDICATOR CODE

GFM REQUIRED GFE REQUIRED GFP REQUIRED

JEWEL BEARING JEWEL BEARING RELATED

LEGACY ITEM DESCRIPTION

APPROX DIMEN: 7 IN. LONG BY 4 IN. WIDE. WEIGHT: 5.7 LBS. MATL CONTENT: STEEL, ALUMINUM, MAGNESIUM. FUNC-TION: SENSES FLAP ASYMMETRICAL CON-DITIONS BEFORE IT EXCEEDS 8 DEGREESAND LOCKS THE FLAPS IN THIS POSI- TION BEFORE FURTHER ASYMMETRY CAN

OCCUR.

Page 1 of 1ITEM DESCRIPTION Version 1Generated by PRPS using Jasper Reports on 03 Apr 2018

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

1650012177899

VERSION NUMBER

NOUN

DISC,BRAKE

INITIATOR

KISSICK, CHRISTOPHER M

ORGANIZATION CODE / OFFICE SYMBOL

423 SCMS / GUEA

COMMERCIAL PHONE

405-734-7834

DSN PHONE

884-7834

CAGE / REFERENCE NUMBER

05624 / 27620-1 56231 / 27620-1

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Contractor Determined Location and Method

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 1650012177899

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 03 Apr 2018

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20301900262-00

DATE INITIATED:

04 SEP 2018

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 F.O.B. Origin - Prepaid Freight Shipment(s) shall be made with freight transportation costs prepaid by the Contractor, who shall verify with the freight shipment company that rates for this/these shipment(s) are equal to or lower than those used for U.S. Government shipments. If rates are not equal to or lower than those for Government shipments, contact the Contracting Officer for additional instructions. Shipping charges are to be shown as a separate item on the payment invoice. If the charges are $100 or more, a copy of the freight charges invoice must be attached to the payment invoice. Failure to properly annotate the invoice and provide a copy of the carrier's bill may result in those costs being disallowed.

Vendor Transportation Instructions

Freight Classification Description 52.247-53 Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

IAW BASIC CONTRACT FD20301900262-00

Note to Contractor: Contact CTO if problems arise. Ship Door-to-Door commercial express carrier service for movement of MICAP and project codes (TP-1 and TP-2/RDD 777): 122, 123, 700, 780 (With restrictions), 879, 880, 9FF, 9FV, 9FX, 9GF, 9GJ, 9GV, 9GS, 9GD, Surge and 720.

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 97X4930.FC04 648 47GT 15400Z 01N000 00000 GGGTTT 503000 F03000 FSR: 013352 PSR: K15249

First Destination Transportation Account Code: FRS2

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA:

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 1650006265728

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): SW3210

Mark For: ACCT 9

Ship To (Address): DLA DISTRIBUTION DEPOT HILL

CML 385 519 8898

HILL AFB UT 84056-5734

84056 - 5734

USA

WPOD:

APOD:

BBP / CCP:

RIC: 1

Requisition Number:

Supplemental Address:

FMS Case:

7537 WARDLEIGH RD BLDG 849W

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

Page 1 of 2DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 26 Sep 2018

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

NAME

Respert, Woodnell M

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-327-3412 / 497-3412

SIGNATURE

//SIGNED//Respert, Woodnell M

DATE

04 SEP 2018

Page 2 of 2DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 26 Sep 2018

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20301900262-00 VERSION: 1

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL Long Line Packaging MIL B

ITEM(S):

1650006265728

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

UNIT PACK

LENGTH

UNIT PACK

WIDTH

UNIT PACK

DEPTH

UNIT PACK

CUBE OPI

1 000 51 1 00 GB NA A NR 00 B 19 15.00 14.5 14.5 16.5 2.008 M

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Villarma, Gary D

PHONE NUMBER:

405-582-9771 / 852-9771

SIGNATURE:

//SIGNED//Villarma, Gary D

DATE:

18247 - 04 SEP 2018

Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 26 Sep 2018