SPRTA118R0522_Attachments.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

6620010344539

VERSION NUMBER

NOUN

TRANSMITTER,RATE OF

INITIATOR

Frazier, Joseph H

ORGANIZATION CODE / OFFICE SYMBOL

422 SCMS / GUEA

COMMERCIAL PHONE

405-582-5344

DSN PHONE

852-5344

CAGE / REFERENCE NUMBER

81349 / MIL-T-38144

81349 / TRU-63/A-4

97424 / 8TJ62GCA3

97424 / 8TJ62GCA4

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Data Plate

MARKING METHOD

Tesa Tape

DESCRIPTION / LOCATION

See attached recommended engineering instruction.

REMARKS

ATTACHMENT(S)

IUID.pdf

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 6620010344539

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 20 Jun 2018

AF IMT 3925, 20030819, V1 REPLACES AF FORM 2600, 19940701, WHICH IS OBSOLETE

ENGINEERING ORDER

1. ENGINEERING ORDER NO.

DATE: PAGE OF PAGES

2. DWG TITLE

3. DWG CAGE CODE

4. DWG NO.

5. NEXT ASSY 6. USED ON

7. OPR CAGE CODE

98748

DWG SIZE

DWG SHEET(S)

LATEST DWG REV LTR

8. TYPE OF ENGINEERING ORDER 9. REASONS FOR CHANGE 11. DOCUMENTS AFFECTED (TO/TCTO/SPEC/OTHER)

14. CORROSION CONT. MON. SYMBOL DATE

ADVANCE CHANGE ERROR CORRECTION

DEVIATION AUTHORIZED DESIGN CHANGE 15. NDI SYMBOL DATE

CHANGE NOTICE DRAWING CLARIFICATION

INFORMATION UPDATE DRAWING 12. EO PREPARED/REQUESTED BY

SYMBOL

DATE 16. SYMBOL DATE

10. DISPOSITION OF SPARES OTHER COMMENTS

This EO adds Item Unique Identification (IUID) requirements to the drawing

DRC Contract

PHONE

17. DWG CHANGED BY SYMBOL DATE

REWORK

MODIFY 13. ENGINEERING APPROVAL SYMBOL DATE 18. CHANGE CHECKED BY SYMBOL DATE

SCRAP

REPLACE PHONE 19. EO/DWG RELEASED BY SYMBOL DATE

20. DESCRIPTION OF CHANGES/REMARKS

gregory hite

Sticky Note

Marked set by gregory hite

AF IMT 3926, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE

(Continuation Sheet)

5. DESCRIPTION OF CHANGES/REMARKS

ENGINEERING ORDER - PARTS LIST CHANGES

DATE: IPAGE OF PAGES

2. DWGTITLE 13. DWG CAGE CODE 4. DWGNO.

PARTS LIST CHANGE

QTY REQ PER DASH NO

CAGE FINDACTION SYM NOMENCLATURE

CODE IDENTIFYING NO. MATERIAUSPECIFICATION ZONE NO.

AF IMT 3927, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE

QTY REQ 3Row5:

QTY REQ 2Row13:

SYMRow6:

SYMBOL_2:

IDENTIFYING NORow11:

FIND NORow6:

IDENTIFYING NORow14:

NOMENCLATURERow4: UID Label (Alternate)

Check Box18: Off

QTY REQ 2Row15:

CAGE CODERow8:

CAGE CODERow9:

Check Box10: Off

QTY REQ 3Row12:

CAGE CODERow2:

CAGE CODERow3:

CAGE CODERow4: 98748

Check Box15: Off

CAGE CODERow6:

CAGE CODERow7:

QTY REQ 3Row10:

SYMRow12:

CAGE CODERow14:

DATE_5:

FIND NORow4:

IDENTIFYING NORow8:

IDENTIFYING NORow5:

FIND NORow11:

ZONERow4:

FIND NORow3:

ACTIONRow4: ADD

ZONERow1:

TOTAL PAGES: 3

Check Box13: Off

CAGE CODERow11:

FIND NORow15:

Check Box6: Off

PHONE: (405) 734-8273

NOMENCLATURERow5:

SYMBOL_4:

ACTIONRow10:

DATE_9: 16 AUG 2011

FIND NORow1:

QTY REQ 2Row3:

QTY REQ 2Row7:

QTY REQRow2: AR

DESCRIPTION OF CHANGES/REMARKS: - As of the date of this EO (11 Jan 2011), no copy of this drawing exists in JEDMICS or MEDALS.

- F-15 Aircraft Fuel Rate of Flow Transmitter (PN 8TJ62GCA3) shall be marked with a Unique Item Identifier (UII). (REF: MIL-STD-130)

- If no UII matrix is present, fabricate new identification plate (200945069-201) and attach to the existing identification plate/label (5692W78P001).

- The new UID identification plate will be located on the existing plate/label as shown sketch/photo on page 2, AF form 3926.

- After attaching UII matrix to existing ID plate, apply a thin overcoat to UII matrix ensuring the matrix edges are sealed using 1A20, 1A33 or equivalent polyurethane conformal coating, per manufacturer's instructions. REF: MIL-I-46058C

- (UID Label P/N 200945085-011A is an acceptable alternate part)

QTY REQRow7:

SYMRow14:

MATERIAUSPECIFICATIONRow8:

MATERIAUSPECIFICATIONRow9:

ACTIONRow12:

MATERIAUSPECIFICATIONRow4: PV6 tesa® Secure Tape or Equivalent

QTY REQ 3:

MATERIAUSPECIFICATIONRow6:

MATERIAUSPECIFICATIONRow7:

MATERIAUSPECIFICATIONRow1:

MATERIAUSPECIFICATIONRow2: MIL-I-46058C Type UR

MATERIAUSPECIFICATIONRow3:

Check Box8: Off

SYMRow2:

FIND NORow14:

FIND NORow7:

QTY REQ 3Row13:

SYMRow11:

QTY REQRow9:

PAGE NO: 1

NOMENCLATURERow6:

IDENTIFYING NORow6:

2011-08-12T13:20:00-0500

TERRY.JOE.M.1231392277

CAGE CODERow15:

DATE_4: 8-12-11

ZONERow10:

ZONERow11:

ZONERow12:

ZONERow13:

SYMRow4:

ZONERow15:

SYMRow10:

NOMENCLATURERow10:

NOMENCLATURERow11:

NOMENCLATURERow12:

IDENTIFYING NORow3: or equivalent

NOMENCLATURERow14:

SYMRow7:

ACTIONRow1: ADD

QTY REQ 3Row1:

NEXT ASSY:

QTY REQ 3Row3:

QTY REQ 3Row2:

Check Box7: Off

QTY REQ 3Row4:

QTY REQ 3Row7:

QTY REQ 3Row6:

QTY REQ 3Row9:

QTY REQ 3Row8:

IDENTIFYING NORow9:

DWG CAGE CODE: 97424

QTY REQRow15:

SYMBOL_7:

ZONERow8:

NOMENCLATURERow7:

SYMRow9:

QTY REQRow10:

MATERIAUSPECIFICATIONRow11:

IDENTIFYING NORow12:

DOCS AFFECTED: 5L13-2-19-3

5L13-2-19-4

FIND NORow5:

DATE_8:

CAGE CODERow1: 98748

CAGE CODERow5:

QTY REQRow3:

CORROSION CONT MON:

Check Box9: Off

FIND NORow8:

Check Box12: Off

SYMBOL_3:

EO DATE: 2011-01-11

IDENTIFYING NORow10:

ACTIONRow7:

FIND NORow12:

IDENTIFYING NORow7:

CAGE CODERow12:

DATE_7: 16 AUGUST 2011

ACTIONRow13:

Check Box14: Off

PAGE NO 2: 2

PAGE NO 3: 3

ZONERow9:

QTY REQRow5:

QTY REQ 2Row2:

NOMENCLATURERow8:

QTY REQ 2Row1:

QTY REQ 2Row6:

QTY REQRow11:

QTY REQ 2Row4:

QTY REQ 2Row5:

QTY REQ 2Row8:

QTY REQ 2Row9:

DWG TITLE: Fuel Rate of Flow Transmitter

DATE_2:

SYMBOL_6: 422 SCMS

ACTIONRow15:

SYMRow3:

DWG SHEETS:

IDENTIFYING NORow2: 1A20, 1A33, IDENTIFYING NORow1: 200945069-201

QTY REQRow8:

ZONERow5:

2011-08-16T10:05:34-0500

JIMENEZ.JOSE.A.1231036500

MATERIAUSPECIFICATIONRow10:

Check Box16: Off

QTY REQ 3Row14:

SYMBOL_5:

NOMENCLATURERow1: PLATE, Identification

NOMENCLATURERow9:

SYMRow5:

SYMBOL_8: GUEA

QTY REQRow12:

QTY REQ 2Row10:

QTY REQ:

FIND NORow9:

IDENTIFYING NORow13:

QTY REQ 3Row11:

Check Box19: Off

ACTIONRow6:

IDENTIFYING NORow4: 200945082-011A

PHONE_2: 405/734-8274

SYMRow15:

CAGE CODERow13:

DATE_6:

FIND NORow10:

QTY REQ 2Row12:

EO PREPARED/REQUESTED BY: JOE TERRY

DESCRIPTION OF CHANGES/REMARKS CONT:

ZONERow2:

SYMBOL: 422

SCMS

ACTIONRow9:

SYMRow8:

FIND NORow2:

MATERIAUSPECIFICATIONRow12:

NOMENCLATURERow2: POLYURETHANE CONFORMAL

QTY REQRow1: 1

NDI:

ACTIONRow3:

Check Box11: Yes

QTY REQ 2Row14:

ACTIONRow11:

MATERIAUSPECIFICATIONRow14:

MATERIAUSPECIFICATIONRow13:

ENG ORD NO: 2011C0874-T

NOMENCLATURERow13:

QTY REQ 3Row15:

ZONERow6:

MATERIAUSPECIFICATIONRow5:

ACTIONRow2: ADD

NOMENCLATURERow15:

LATEST DWG REV LTR:

QTY REQRow4: AR

ZONERow3:

DWG NO: 8TJ62GCA3

2011-08-16T10:05:17-0500

JIMENEZ.JOSE.A.1231036500

QTY REQ 2Row11:

FIND NORow13:

IDENTIFYING NORow15:

DATE_3:

NOMENCLATURERow3: COATING

USED ON: F-15 Aircraft

MATERIAUSPECIFICATION:

QTY REQRow14:

ACTIONRow5:

ACTIONRow14:

SYMRow1:

QTY REQRow13:

CAGE CODERow10:

Check Box5: Yes

QTY REQRow6:

DWG SIZE:

SYMRow13:

QTY REQ 2:

ZONERow14:

ACTIONRow8:

ZONERow7:

AF IMT 3925, 20030819, V1 REPLACES AF FORM 2600, 19940701, WHICH IS OBSOLETE

5. NEXT ASSY 6. USED ON

7. OPR CAGE CODE

98748

DWG SIZE

DWG SHEET(S)

LATEST DWG REV LTR

8. TYPE OF ENGINEERING ORDER 9. REASONS FOR CHANGE 11. DOCUMENTS AFFECTED (TO/TCTO/SPEC/OTHER)

14. CORROSION CONT. MON. SYMBOL DATE

ADVANCE CHANGE ERROR CORRECTION

DEVIATION AUTHORIZED DESIGN CHANGE 15. NDI SYMBOL DATE

CHANGE NOTICE DRAWING CLARIFICATION

INFORMATION UPDATE DRAWING 12. EO PREPARED/REQUESTED BY

DATE 16. SYMBOL DATE

10. DISPOSITION OF SPARES OTHER COMMENTS

This EO adds Item Unique Identification (IUID) requirements to the drawing

DRC Contract

17. DWG CHANGED BY SYMBOL DATE

REWORK

MODIFY 13. ENGINEERING APPROVAL SYMBOL DATE 18. CHANGE CHECKED BY SYMBOL DATE

SCRAP

REPLACE PHONE 19. EO/DWG RELEASED BY SYMBOL DATE

20. DESCRIPTION OF CHANGES/REMARKS

gregory hite

Sticky Note

Marked set by gregory hite

AF IMT 3926, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE

(Continuation Sheet)

5. DESCRIPTION OF CHANGES/REMARKS

ENGINEERING ORDER - PARTS LIST CHANGES

DATE: IPAGE OF PAGES

2. DWGTITLE 13. DWG CAGE CODE 4. DWGNO.

PARTS LIST CHANGE

QTY REQ PER DASH NO

CAGE FINDACTION SYM NOMENCLATURE

CODE IDENTIFYING NO. MATERIAUSPECIFICATION ZONE NO.

AF IMT 3927, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE

QTY REQ 3Row5:

QTY REQ 2Row13:

SYMRow6:

SYMBOL_2:

IDENTIFYING NORow11:

FIND NORow6:

IDENTIFYING NORow14:

NOMENCLATURERow4: UID Label (Alternate)

Check Box18: Off

QTY REQ 2Row15:

CAGE CODERow8:

CAGE CODERow9:

Check Box10: Off

QTY REQ 3Row12:

CAGE CODERow2:

CAGE CODERow3:

CAGE CODERow4: 98748

Check Box15: Off

CAGE CODERow6:

CAGE CODERow7:

QTY REQ 3Row10:

SYMRow12:

CAGE CODERow14:

DATE_5:

FIND NORow4:

IDENTIFYING NORow8:

IDENTIFYING NORow5:

FIND NORow11:

ZONERow4:

FIND NORow3:

ACTIONRow4: ADD

ZONERow1:

TOTAL PAGES: 3

Check Box13: Off

CAGE CODERow11:

FIND NORow15:

Check Box6: Off

PHONE: (405) 734-8273

NOMENCLATURERow5:

SYMBOL_4:

ACTIONRow10:

DATE_9: 8-26-11

FIND NORow1:

QTY REQ 2Row3:

QTY REQ 2Row7:

QTY REQRow2: AR

DESCRIPTION OF CHANGES/REMARKS: - As of the date of this EO (25 Aug 2010), no copy of this drawing exists in JEDMICS.

- F-15 Aircraft Rate of Flow Fuel Transmitter (PN 150-005-004) shall be marked with a Unique Item Identifier (UII). (REF: MIL-STD-130)

- If no UII matrix is present, fabricate new identification plate (200945069-201) and attach to the existing identification plate/label (696-392-001).

- The new UID identification plate will be located on the existing identification plate/label as shown in sketch/photo on page 2, AF form 3926.

- After attaching IUID plate to the existing identification plate/label, apply a thin overcoat to IUID plate ensuring the plate edges are sealed, using 1A20, 1A33 or equivalent Polyurethane Conformal Coating, per manufacturer's instructions. REF: MIL-I-46058C

- (UID Label P/N 200945085-005A is an acceptable alternate part)

QTY REQRow7:

SYMRow14:

MATERIAUSPECIFICATIONRow8:

MATERIAUSPECIFICATIONRow9:

ACTIONRow12:

MATERIAUSPECIFICATIONRow4: PV6 tesa® Secure Tape or Equivalent

QTY REQ 3:

MATERIAUSPECIFICATIONRow6:

MATERIAUSPECIFICATIONRow7:

MATERIAUSPECIFICATIONRow1:

MATERIAUSPECIFICATIONRow2: MIL-I-46058C Type UR

MATERIAUSPECIFICATIONRow3:

Check Box8: Off

SYMRow2:

FIND NORow14:

FIND NORow7:

QTY REQ 3Row13:

SYMRow11:

QTY REQRow9:

PAGE NO: 1

NOMENCLATURERow6:

IDENTIFYING NORow6:

2011-08-22T14:17:45-0500

CORTEZ.ADOLFO.JR.1384345812

CAGE CODERow15:

DATE_4: 2011-08-22

ZONERow10:

ZONERow11:

ZONERow12:

ZONERow13:

SYMRow4:

ZONERow15:

SYMRow10:

NOMENCLATURERow10:

NOMENCLATURERow11:

NOMENCLATURERow12:

IDENTIFYING NORow3: or equivalent

NOMENCLATURERow14:

SYMRow7:

ACTIONRow1: ADD

QTY REQ 3Row1:

NEXT ASSY:

QTY REQ 3Row3:

QTY REQ 3Row2:

Check Box7: Off

QTY REQ 3Row4:

QTY REQ 3Row7:

QTY REQ 3Row6:

QTY REQ 3Row9:

QTY REQ 3Row8:

IDENTIFYING NORow9:

DWG CAGE CODE: 59211

QTY REQRow15:

SYMBOL_7:

ZONERow8:

NOMENCLATURERow7:

SYMRow9:

QTY REQRow10:

MATERIAUSPECIFICATIONRow11:

IDENTIFYING NORow12:

DOCS AFFECTED: 5L13-2-21-3

FIND NORow5:

DATE_8:

CAGE CODERow1: 98748

CAGE CODERow5:

QTY REQRow3:

CORROSION CONT MON:

Check Box9: Off

FIND NORow8:

Check Box12: Off

SYMBOL_3:

EO DATE: 2010-08-25

IDENTIFYING NORow10:

ACTIONRow7:

FIND NORow12:

IDENTIFYING NORow7:

CAGE CODERow12:

DATE_7: 26 AUGUST 2011

ACTIONRow13:

Check Box14: Off

PAGE NO 2: 2

PAGE NO 3: 3

ZONERow9:

QTY REQRow5:

QTY REQ 2Row2:

NOMENCLATURERow8:

QTY REQ 2Row1:

QTY REQ 2Row6:

QTY REQRow11:

QTY REQ 2Row4:

QTY REQ 2Row5:

QTY REQ 2Row8:

QTY REQ 2Row9:

DWG TITLE: FUEL FLOW TRANSMITTER

DATE_2:

SYMBOL_6: 422 SCMS

ACTIONRow15:

SYMRow3:

DWG SHEETS:

IDENTIFYING NORow2: 1A20, 1A33, IDENTIFYING NORow1: 200945069-201

QTY REQRow8:

ZONERow5:

2011-08-26T16:05:05-0500

JIMENEZ.JOSE.A.1231036500

MATERIAUSPECIFICATIONRow10:

Check Box16: Off

QTY REQ 3Row14:

SYMBOL_5:

NOMENCLATURERow1: PLATE, Identification

NOMENCLATURERow9:

SYMRow5:

SYMBOL_8: GUEA

QTY REQRow12:

QTY REQ 2Row10:

QTY REQ: -004

FIND NORow9:

IDENTIFYING NORow13:

QTY REQ 3Row11:

Check Box19: Off

ACTIONRow6:

IDENTIFYING NORow4: 200945082-005A

PHONE_2: 405/734-8274

SYMRow15:

CAGE CODERow13:

DATE_6:

FIND NORow10:

QTY REQ 2Row12:

EO PREPARED/REQUESTED BY: Adolfo Cortez Jr

DESCRIPTION OF CHANGES/REMARKS CONT:

ZONERow2:

SYMBOL: 422

SCMS

ACTIONRow9:

SYMRow8:

FIND NORow2:

MATERIAUSPECIFICATIONRow12:

NOMENCLATURERow2: POLYURETHANE CONFORMAL

QTY REQRow1: 1

NDI:

ACTIONRow3:

Check Box11: Yes

QTY REQ 2Row14:

ACTIONRow11:

MATERIAUSPECIFICATIONRow14:

MATERIAUSPECIFICATIONRow13:

ENG ORD NO: 2011C1015-T

NOMENCLATURERow13:

QTY REQ 3Row15:

ZONERow6:

MATERIAUSPECIFICATIONRow5:

ACTIONRow2: ADD

NOMENCLATURERow15:

LATEST DWG REV LTR:

QTY REQRow4: 1

ZONERow3:

DWG NO: 150-005-004

2011-08-26T16:04:56-0500

JIMENEZ.JOSE.A.1231036500

QTY REQ 2Row11:

FIND NORow13:

IDENTIFYING NORow15:

DATE_3:

NOMENCLATURERow3: COATING

USED ON: F-15 Aircraft

MATERIAUSPECIFICATION:

QTY REQRow14:

ACTIONRow5:

ACTIONRow14:

SYMRow1:

QTY REQRow13:

CAGE CODERow10:

Check Box5: Yes

QTY REQRow6:

DWG SIZE:

SYMRow13:

QTY REQ 2:

ZONERow14:

ACTIONRow8:

ZONERow7:

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

6620013100216

VERSION NUMBER

NOUN

TRANSMITTER,RATE OF

INITIATOR

Frazier, Joseph H

ORGANIZATION CODE / OFFICE SYMBOL

422 SCMS / GUEA

COMMERCIAL PHONE

405-582-5344

DSN PHONE

852-5344

26055 / 150-005-004 59211 / 150-005-004 76301 / 68-580066-107

81349 / TRU-63/A-4

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Data Plate

MARKING METHOD

Tesa Tape

See attached Engineering Order for recommended marking instruction.

150-005-004_EO.pdf

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 6620013100216

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 12 Apr 2018

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20301802209-01 VERSION: 1

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL Long Line Packaging MIL B

ITEM(S):

6620010344539

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

LENGTH

WIDTH

DEPTH

CUBE OPI

1 000 41 1 00 GB 00 0 NV 00 B ZZ 18.50 26.0 15.0 14.5 3.272 M

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

ITEMS W/RESIDUAL FUEL USE SPI F WF-117-2012; ZZ MARKINGS=IAW AFI 24-203, 2.16.6.3 IF APPLICABLE

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

O'Neal, Michael A

PHONE NUMBER:

405-582-9766 / 852-9766

SIGNATURE:

//SIGNED//O'Neal, Michael A

DATE:

18163 - 12 JUN 2018

Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 20 Jun 2018

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20301802209-01

DATE INITIATED:

12 JUN 2018

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 Freight Classification Description 52.247-53 Evidence of Shipment FMS 352.225-U037U Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

IAW BASIC FD20301802209-01

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 9711X8242.0002 4FX 475W CQBISR 000000 00000 034000 503000 F03000 FSR: 036602 PSR: 381351 DSR: 174394 CIN:

F3YTBK8109B004

First Destination Transportation Account Code:

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA: 9711X8242.0002 4FX 475W CQBISR 000000 00000 0

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 6620010344539

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): DSR004

Mark For: DSRA00

Ship To (Address):

WPOD:

APOD:

BBP / CCP:

RIC:

Requisition Number: DSRA5480640016

Supplemental Address: DA4QBI

FMS Case: QBI

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

TACRN:

AAB

Page 1 of 2DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 20 Jun 2018

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 9711X8242.0002 4FX 475W CSAPSR 000000 00000 035000 503000 F03000 FSR: 053261 PSR: C60431

First Destination Transportation Account Code:

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA: 9711X8242.0002 4FX 475W CSAPSR 000000 00000 0

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 6620010344539

Purchase Instrument Line Item Number: 0001AA

Ship to (DoDAAC / MAPAC): DSR004

Mark For: DSRA00

Ship To (Address):

WPOD:

APOD:

BBP / CCP:

RIC:

Requisition Number: DSRA5481378354

Supplemental Address: DA4SAP

FMS Case: SAP

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

NAME

Miller, Sharon D

ORGANIZATION / OFFICE

406 SCMS / GULAA

COMMERCIAL / DSN

478-327-6308 / 497-6308

SIGNATURE

//SIGNED//Miller, Sharon D

DATE

12 JUN 2018

Page 2 of 2DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 20 Jun 2018