2209634_QUALRQMT.pdf

SUPPLEMENT TO AFLC FORM 761

DATE

NOUN NATIONAL STOCK NUMBER PART NUMBER

Only the checked statement applies to this NSN.

QUALIFICATIONS REQUIREMENTS PRIOR TO 19 OCT 84

Section F.1

This item qualifies under FAR 9.206-1(a)(2) and the requirements of FAR 9.202(a) are not applicable.

Prequalification of sources is essential to maintain high quality and maximum operational safety.

Section F.2

(a) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item.

(b) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item.

(c) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet.

Category III capability is permissible.

Section F.3

The provisions of FAR 9.206-1 and -2, as supplemented, apply. In accordance with AFMCFARS, 1 July 97, Part 5309.206-1(e)(1), Notes A and B apply. Qualification requirements were established prior to 19 Oct 84.

QUALIFICATION REQUIREMENTS AFTER 19 OCT 84

Justification for Qualification Requirement (JQR) is required.

Section F.1

Prequalification of sources is essential to maintain high quality and maximum operational safety. The requirements of FAR 9.202(a) apply.

Section F.2

(a) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item.

(b) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item.

Section F.3

The provisions of FAR 9.206-1 and -2, as supplemented, apply. In accordance with AFMCFARS, 1 July 97, Part 5309.206-1(e)(1), Notes A and D apply. Qualification requirements were established after 19 Oct 84.

EVALUATING ENGINEER/TECHNICIAN (Signature) SYMBOL EXTENSION

OC-ALC Form O-367, JUN 01 (TI) http://www.tinker.af.mil/shared/media/document/AFD-070109-194.doc http://www.tinker.af.mil/shared/media/document/AFD-070109-194.doc http://www.tinker.af.mil/shared/media/document/AFD-070109-194.doc http://www.tinker.af.mil/shared/media/document/AFD-070109-194.doc http://www.tinker.af.mil/shared/media/document/AFD-070109-194.doc