SPRRA225R0075 SYNOPSIS REVISED ATTACHMENT 071025.pdf

SPRRA225R0075 SYNOPSIS ATTACHMENT

PRO

N NSN P/N NOUN

ESTIM

ATED

FY2026 Q

TYs

FY2027 Q

FY2028 Q

APPRO

VED

C

AG

E

N

AIC

S

# O

F EM

PLO

YEES

AM

C

C O

D E

AM

RC

C O

D

E EXP

D

ATE

SH

IP TO

D O

D

AAC

FAT REQ

U

IRED

FAT W

AIVED

PLT W

/O

U

T FAT

(D

AC

A)

D

RAW

IN

G

D

RAW

IN

G

REVISIO

N

N/A 1240-01-442-4825 13588710 PERISCOPE HEAD ASSEMBLY 105 105 105 32865 333310 1000 3 / 4 TBD TBD YES NO 963 DAYS 13588710 -

N/A 1240-01-462-8519 13588683 FIELD OF VIEW ASSEMBLY 11 11 11 32865 333310 1000 3 / 4 TBD TBD YES NO 675 DAYS 13588683 -

N/A 1240-01-537-0134 13620294 LOWER TARGET ACQ SUB 7 7 7 32865 333310 1000 3 / 4 TBD TBD YES NO 977 DAYS N/A N/A

N/A 1240-01-581-5592 13622000 LASER SHUTTER ASSEMBLY 75 75 75 32865 333310 1000 3 / 4 TBD TBD YES NO 698 DAYS N/A N/A

N/A 1240-01-617-7635 13677506 CCD DAY CAMERA 15 15 15 32865 333310 1000 3 / 4 TBD TBD NO NO 270 DAYS 13677506 -

N/A 1290-01-461-9555 13588695 SLIDING BROWPAD ASSEMBLY 19 19 19 32865 332999 750 3 / 4 TBD TBD NO NO 300 DAYS 13588695 -

N/A 1430-01-571-5812 13620159 MISSILE CONTROL SUB UPGRADE 50 50 50 32865 334511 1350 3 / 4 TBD TBD YES NO 540 DAYS 13620159 -

N/A 5855-01-462-9048 13588681 COLLIMATOR INFRARED 40 40 40 32865 334511 1350 3 / 4 TBD TBD YES NO 855 DAYS N/A N/A

N/A 5855-01-463-4579 13588715 INFRARED WINDOW ASSY 57 57 57 32865 334511 750 3 / 4 TBD TBD YES NO 145 DAYS 13588715 -

N/A 5865-01-721-1161 13748101 2.8 LTAS 2ND GEN 9 9 9 32865 325998 650 3 / 4 TBD TBD TBD NO 270 DAYS N/A -

N/A 5865-01-721-1364 13748100 2.8 HDLW LTAS 9 9 9 32865 325998 650 3 / 4 TBD TBD TBD NO 270 DAYS N/A -

N/A 5998-01-462-8499 13588711 CCA, P-HEAD POWER SUPPLY 7 7 7 32865 334412 750 3 / 4 TBD TBD YES NO 405 DAYS 13588711 -

N/A 5998-01-502-9342 13592574 CCA, VIDEO DEFLECTION 17 17 17 32865 334412 750 3 / 4 TBD TBD YES NO 270 DAYS 13592574 -

N/A 5998-01-591-4248 13620162 CCA, CONFIGURATION MODULE 1 1 1 32865 334412 750 3 / 4 TBD TBD YES NO 270 DAYS 13620162 B

N/A 5998-01-645-7357 13690050 CCA, LTAS PROCESSOR 8 8 8 32865 334412 750 3 / 4 TBD TBD YES NO 765 DAYS 13690050 -

N/A 5998-01-645-7359 13690052 CCA, P-HEAD SERVO PROCESS 28 28 28 32865 334412 750 3 / 4 TBD TBD YES NO 855 DAYS 13690052 -

N/A 5998-01-645-7361 13690053 CCA, P-HEAD INTERFACE 12 12 12 32865 334412 750 3 / 4 TBD TBD YES NO 630 DAYS 13690053 -

N/A 5998-01-645-7362 13690051 CCA, TAS INTERFACE 18 18 18 32865 334412 750 3 / 4 TBD TBD YES NO 495 DAYS 13690051 -

N/A 5998-01-721-1155 13744905 PHEAD CARRIER CCA 36 36 36 32865 334412 750 3 / 4 TBD TBD TBD NO 270 DAYS N/A -

N/A 6130-01-471-4569 13588757 POWER SUPPLY 0 1 1 32865 335931 600 3 / 4 TBD TBD YES NO 270 DAYS 13588757 -

N/A 6130-01-543-3461 13620091 POWER SUPPLY 70 70 70 32865 335931 600 3 / 4 TBD TBD YES NO 720 DAYS N/A N/A

N/A 7025-01-463-4586 13588679 DISPLAY UNIT 21 21 21 32865 334412 1250 3 / 4 TBD TBD YES NO 495 DAYS 13588679 -

FIRST ARTICLE TEST (FAT) MAY BE REQUIRED, AND WHEN APPLICABLE, THE REQUIREMENT WILL BE IDENTIFIED AT THE CLIN LEVEL.

IMPROVED BRADLEY ACQUISITION SUBSYSTEM (IBAS)

ACQUISITION METHOD CODE (AMC) 3 LIST

3A Acquire, for the second or subsequent time, directly from the actual manufacturer. The Government's right to use data in its possession is questionable. This code is only applicable to parts under immediate buy requirements and for as long thereafter as rights to data are still under review for resolution and appropriate coding. This code is assigned only at the conclusion of limited screening, and it remains assigned until the full screening process resolves the Government's rights to use data and results in assignment of a different AMSC. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, or if the data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.

3B Acquire, for the second or subsequent time, directly from the actual manufacturer. This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

3C

Acquire, for the second or subsequent time, directly from the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.

3D Acquire, for the second or subsequent time, directly from the actual manufacturer. The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation.

AMCS 3, 4, or 5 are valid.

3E (Reserved) 3F (Reserved)

3G Acquire, for the second or subsequent time, directly from the actual manufacturer. The Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling or manufacturing restrictions. (This is the only AMSC that implies that parts are candidates for full and open competition.

Other AMSCs such as K, M, N, Q, and S may imply limited competition when two or more independent sources exist yet the technical data package is inadequate for full and open competition.) AMCs 1 or 2 are valid.

3H Acquire, for the second or subsequent time, directly from the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than the current source(s). This code is applicable only to parts under immediate buy requirements and only for as long thereafter as the deficiency is under review for resolution and appropriate recoding. This code is only assigned at the conclusion of limited screening, and it remains assigned until the full screening process resolves physical data questions and results in assignment of a different AMSC. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

3I (Not authorized) 3J (Reserved)

3K Acquire, for the second or subsequent time, directly from the actual manufacturer. This part must be produced from class 1 castings and similar type forgings as approved (controlled) by procedures contained in the current version of MIL-STD-2175. If one source has such castings and cannot provide them to other sources, AMCs 3, 4, or 5 are valid. If at least two sources have such castings or they can be provided to other sources AMCs 1 or 2 or valid.

3L Acquire, for the second or subsequent time, directly from the actual manufacturer. The annual buy value of this part falls below the screening threshold established by DoD components and field activities. However, this part has been screened for additional known sources, resulting in either confirmation that the initial source exists or that other sources may supply the part. No additional screening was performed to identify the competitive or noncompetitive conditions that would result in assignment of a different AMSC. This code shall not be used when screening parts entering the inventory. This code shall be used only to replace AMSC O for parts under the established screening threshold. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

3M Acquire, for the second or subsequent time, directly from the actual manufacturer. Manufacture of this part requires use of master or coordinated tooling. If only one set of tooling exists and cannot be made available to another source for manufacture of this part, AMCs 3, 4, or 5 are valid. When the availability of existent or refurbishable tooling is available to two or more sources, then AMCs 1 or 2 are valid.

3N Acquire, for the second or subsequent time, directly from the actual manufacturer. Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test or inspection facilities. If the test cannot be made available for the competitive manufacture of the part, the required test or inspection knowledge cannot be documented for reliable replication, or the required physical test or inspection facilities and processes cannot be economically documented in a TDP, valid AMCs are 3, 4, or 5. If the facilities or tests can be made available to two or more competitive sources, AMCs 1 or 2 are valid.

3O Acquire, for the second or subsequent time, directly from the actual manufacturer. The part was not assigned an AMSC when it entered the inventory, nor has it ever completed screening. Use of this code in conjunction with AMC 0 is sometimes necessary but discouraged. Maximum effort to determine the applicability of an alternate AMSC is the objective. Only AMC O is valid.

3P Acquire, for the second or subsequent time, directly from the actual manufacturer. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. This code is used in situations where the Government has the data but does not own the rights to the data. If only one source has the rights or data to manufacture this item, AMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to manufacture this item, AMCs 1 or 2 are valid.

3Q Acquire, for the second or subsequent time, directly from the actual manufacturer. The Government does not have adequate data, lacks rights to data, or both needed to purchase this part from additional sources. The Government has been unable to economically buy the data or rights to the data, although the part has been undergoing full screening for 12 or more months. Breakout to competition has not been achieved, but current, continuing actions to obtain necessary rights to data or adequate, reprocurement technical data indicate breakout to competition is expected to be achieved. This part may be a candidate for reverse engineering or other techniques to obtain technical data. All AMSC Q items are required to be reviewed within the timeframes cited in 2-203(b). If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

3R Acquire, for the second or subsequent time, directly from the actual manufacturer. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. If only one source has the rights or data to manufacture this item, AMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to manufacture this item, AMCs 1 or 2 are valid.

3S Acquire, for the second or subsequent time, directly from the actual manufacturer. Acquisition of this item is restricted to Government approved source(s) because the production of this item involves unclassified but militarily sensitive technology (see FAR Subpart 6.3). If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved, AMCs 1 or 2 are valid.

3T Acquire, for the second or subsequent time, directly from the actual manufacturer. Acquisition of this part is controlled by qualified products list (QPL) procedures. Competition for this part is limited to sources which are listed on or are qualified for listing on the QPL at the time of award (see FAR Part 9 and DFARS Part 209). AMCs 1 or 2 are valid.

3U Acquire, for the second or subsequent time, directly from the actual manufacturer. The cost to the Government to breakout this part and acquire it competitively has been determined to exceed the projected savings over the life span of the part. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

3V Acquire, for the second or subsequent time, directly from the actual manufacturer. This part has been designated a high reliability part under a formal reliability program. Probability of failure would be unacceptable from the standpoint of safety of personnel and/or equipment. The cognizant engineering activity has determined that data to define and control reliability limits cannot be obtained nor is it possible to draft adequate specifications for this purpose. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources are available, AMCs 1 or 2 are valid.

3W (Reserved) 3X (Not authorized)

3Y Acquire, for the second or subsequent time, directly from the actual manufacturer. The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

3Z Acquire, for the second or subsequent time, directly from the actual manufacturer. This part is a commercial/nondevelopmental/off-the-shelf item. Commercial item descriptions, commercial vendor catalog or price lists or commercial manuals assigned a technical manual number apply. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources are available, AMCs 1 or 2 are valid.

ACQUISITION METHOD REASON CODES (AMRC)

Parts breakout codes and prescribed responsibilities for their assignment and management.

SOURCE: DFARS PGI 217.7506—SPARE PARTS BREAKOUT PROGRAM

ACQUISITION METHOD CODE (AMC) 4 LIST

4A Acquire, for the first time, directly from the actual manufacturer. The Government's right to use data in its possession is questionable. This code is only applicable to parts under immediate buy requirements and for as long thereafter as rights to data are still under review for resolution and appropriate coding. This code is assigned only at the conclusion of limited screening, and it remains assigned until the full screening process resolves the Government's rights to use data and results in assignment of a different AMSC. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, or if the data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.

4B Acquire, for the first time, directly from the actual manufacturer. This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

4C

Acquire, for the first time, directly from the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.

4D Acquire, for the first time, directly from the actual manufacturer. The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation. AMCS 3, 4, or 5 are valid.

4E (Reserved) 4F (Reserved)

4G Acquire, for the first time, directly from the actual manufacturer. The Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling or manufacturing restrictions. (This is the only AMSC that implies that parts are candidates for full and open competition. Other AMSCs such as K, M, N, Q, and S may imply limited competition when two or more independent sources exist yet the technical data package is inadequate for full and open competition.) AMCs 1 or 2 are valid.

4H Acquire, for the first time, directly from the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than the current source(s). This code is applicable only to parts under immediate buy requirements and only for as long thereafter as the deficiency is under review for resolution and appropriate recoding. This code is only assigned at the conclusion of limited screening, and it remains assigned until the full screening process resolves physical data questions and results in assignment of a different AMSC. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

4I (Not authorized) 4J (Reserved)

4K Acquire, for the first time, directly from the actual manufacturer. This part must be produced from class 1 castings and similar type forgings as approved (controlled) by procedures contained in the current version of MIL-STD-2175. If one source has such castings and cannot provide them to other sources, AMCs 3, 4, or 5 are valid. If at least two sources have such castings or they can be provided to other sources AMCs 1 or 2 or valid.

4L Acquire, for the first time, directly from the actual manufacturer. The annual buy value of this part falls below the screening threshold established by DoD components and field activities. However, this part has been screened for additional known sources, resulting in either confirmation that the initial source exists or that other sources may supply the part. No additional screening was performed to identify the competitive or noncompetitive conditions that would result in assignment of a different AMSC. This code shall not be used when screening parts entering the inventory. This code shall be used only to replace AMSC O for parts under the established screening threshold. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

4M Acquire, for the first time, directly from the actual manufacturer. Manufacture of this part requires use of master or coordinated tooling. If only one set of tooling exists and cannot be made available to another source for manufacture of this part, AMCs 3, 4, or 5 are valid. When the availability of existent or refurbishable tooling is available to two or more sources, then AMCs 1 or 2 are valid.

4N Acquire, for the first time, directly from the actual manufacturer. Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test or inspection facilities. If the test cannot be made available for the competitive manufacture of the part, the required test or inspection knowledge cannot be documented for reliable replication, or the required physical test or inspection facilities and processes cannot be economically documented in a TDP, valid AMCs are 3, 4, or 5. If the facilities or tests can be made available to two or more competitive sources, AMCs 1 or 2 are valid.

4O Acquire, for the first time, directly from the actual manufacturer. The part was not assigned an AMSC when it entered the inventory, nor has it ever completed screening. Use of this code in conjunction with AMC 0 is sometimes necessary but discouraged. Maximum effort to determine the applicability of an alternate AMSC is the objective.

Only AMC O is valid.

4P Acquire, for the first time, directly from the actual manufacturer. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. This code is used in situations where the Government has the data but does not own the rights to the data. If only one source has the rights or data to manufacture this item, AMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to manufacture this item, AMCs 1 or 2 are valid.

4Q Acquire, for the first time, directly from the actual manufacturer. The Government does not have adequate data, lacks rights to data, or both needed to purchase this part from additional sources. The Government has been unable to economically buy the data or rights to the data, although the part has been undergoing full screening for 12 or more months. Breakout to competition has not been achieved, but current, continuing actions to obtain necessary rights to data or adequate, reprocurement technical data indicate breakout to competition is expected to be achieved. This part may be a candidate for reverse engineering or other techniques to obtain technical data. All AMSC Q items are required to be reviewed within the timeframes cited in 2-203(b). If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

4R Acquire, for the first time, directly from the actual manufacturer. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. If only one source has the rights or data to manufacture this item, AMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to manufacture this item, AMCs 1 or 2 are valid.

4S Acquire, for the first time, directly from the actual manufacturer. Acquisition of this item is restricted to Government approved source(s) because the production of this item involves unclassified but militarily sensitive technology (see FAR Subpart 6.3). If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved, AMCs 1 or 2 are valid.

4T Acquire, for the first time, directly from the actual manufacturer. Acquisition of this part is controlled by qualified products list (QPL) procedures. Competition for this part is limited to sources which are listed on or are qualified for listing on the QPL at the time of award (see FAR Part 9 and DFARS Part 209). AMCs 1 or 2 are valid.

4U Acquire, for the first time, directly from the actual manufacturer. The cost to the Government to breakout this part and acquire it competitively has been determined to exceed the projected savings over the life span of the part. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

4V Acquire, for the first time, directly from the actual manufacturer. This part has been designated a high reliability part under a formal reliability program. Probability of failure would be unacceptable from the standpoint of safety of personnel and/or equipment. The cognizant engineering activity has determined that data to define and control reliability limits cannot be obtained nor is it possible to draft adequate specifications for this purpose. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources are available, AMCs 1 or 2 are valid.

4W (Reserved) 4X (Not authorized)

4Y Acquire, for the first time, directly from the actual manufacturer. The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.

4Z Acquire, for the first time, directly from the actual manufacturer. This part is a commercial/nondevelopmental/off-the-shelf item. Commercial item descriptions, commercial vendor catalog or price lists or commercial manuals assigned a technical manual number apply. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources are available, AMCs 1 or 2 are valid.

ACQUISITION METHOD REASON CODES (AMRC)

Parts breakout codes and prescribed responsibilities for their assignment and management.

SOURCE: DFARS PGI 217.7506—SPARE PARTS BREAKOUT PROGRAM