CNT TDPL.pdf

06/15/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 14101260-1 WPN SYS: M-D6

PRON NUMBER: D13F0247

NSN: 1450-01-6874222

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

DP 18876 14101260 D N 0001/0004 ADQ FOR SOURCE ONLY OSLA D/E

SKID ASSEMBLY - SHOCK ABSORBING EXP

D N 0002/0004 D N 0003/0004 B N 0004/0004

DP 18876 14101260-1 D N 0001/0004 PROC RESTRICTED TO SUP

SKID ASSEMBLY SHOCK ABSORBING 64059

06/15/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 14101260-1 WPN SYS: M-D6

PRON NUMBER: D13F0247

NSN: 1450-01-6874222

PACKAGING DOCUMENTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

NC 96906 MIL-STD-2073-1 E N 0001/0001 * D/A

STANDARD PRACTICE FOR MILITARY PACKAGING

CUI / SOURCE SELECTION INFORMATION – SEE FAR 2.101 & 3.104

06/15/2023 CONTRACT TDPL PAGE 3

PART NUMBER: 14101260-1

PRON: D13F0247

NSN: 1450-01-687-4222

TDPL LEGEND

DESCRIPTION OF SYMBOLS

SUP = SUPPRESSED DOCUMENT

OSLA = OTHER SPECIAL LICENSING AGREEMENTS

* = NOT FURNISHED - TO BE OBTAINED FROM:

DLA DOCUMENT SERVICES

BUILDING 4D

700 ROBBINS AVENUE

PHILADELPHIA, PA 19111-5094

HTTP://QUICKSEARCH.DLA.MIL/

IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.

D/A = DISTRIBUTION STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

D/E = DISTRIBUTION STATEMENT E - DISTRIBUTION AUTHORIZED TO DOD COMPONENTS ONLY.

EXP = EXPORT CONTROLLED DOCUMENT

EXPORT CONTROL STATEMENT

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATION OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

06/15/2023 AMCOM TDPL PAGE 20

STATUS FORMS REPORT

PART NUMBER: 14101260-1

PRON: D13F0247 RECORD NUMBER: 01

NSN: 1450-01-6874222

ATR REVIEW OF

ASTM-D543 CAGE : 81346

Category : 001 ODC Usage: Y

WAIV REQ : N

PRACTICES EVALUATING RESISTANCE PLASTICS CHEMICAL REAG

ASTM-D543 contains the following Class I ODC: carbon tetrachloride For spares/repair parts actions, tailoring is as follows:

Select any of the identified other 43 solvents/reagents for the procedures in this specification to determine the resistance of plastics to reagents.

No waiver is required if carbon tetrachloride is NOT used.

WATSON, SHERRY

Approved Technical Representative (ATR)

STATUS FORM PAGE 1

06/15/2023 AMCOM TDPL PAGE 21

STATUSFORM DEFICIENCY REPORT

PART NUMBER: 14101260-1

PRON: D13F0247 RECORD NUMBER: 01

NSN: 1450-01-6874222

CAGE DOCUMENT NUMBER -----------------REASON FOR DEFICIENCY-----------------

TOTAL STATUSFORM DEFICIENCIES : 0

06/15/2023 AMCOM TDPL PAGE 4

PACKAGING REQUIREMENTS

PART NUMBER: 14101260-1

PRON NUMBER: D13F0247

NSN: 1450-01-6874222

Weapon System: M-D6 NOUN: SKID,SHIPPING AND S

Packaging Specialist: O'CONNOR, DOUGLAS L. Phone: (256)876-3019 Date: 06/08/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 51.0 Length: 36.0 Width: 36.0 Depth: 12.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [B] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [51] JII/CD [1] JIII/PM [00] JIV/WM [00]

JV/CD [GH] JVI/CT [H] JVII/UC [ED] JVII/IC [00]

JIX/A/PK [F] JX/SM [ZZ] JVIIIA/OPI [M]

[X] 5. Supplemental Information

ZZ=TWO-MAN LIFT

[ ] 6. Reusable Container will be Government Furnished Material

[ ] 7. Reusable Container will be Contractor Furnished Material

06/15/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 14101260-2 WPN SYS: M-D6

PRON NUMBER: D13F0248

NSN: 1450-01-6874300

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

DP 18876 14101260 D N 0001/0004 ADQ FOR SOURCE ONLY OSLA D/E

SKID ASSEMBLY - SHOCK ABSORBING EXP

D N 0002/0004 D N 0003/0004 B N 0004/0004

DP 18876 14101260-2 D N 0001/0004 PROC RESTRICTED TO SUP

SKID ASSEMBLY SHOCK ABSORBING 64059

06/15/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 14101260-2 WPN SYS: M-D6

PRON NUMBER: D13F0248

NSN: 1450-01-6874300

PACKAGING DOCUMENTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

NC 96906 MIL-STD-2073-1 E N 0001/0001 * D/A

STANDARD PRACTICE FOR MILITARY PACKAGING

06/15/2023 CONTRACT TDPL PAGE 3

PART NUMBER: 14101260-2

PRON: D13F0248

NSN: 1450-01-687-4300

TDPL LEGEND

DESCRIPTION OF SYMBOLS

SUP = SUPPRESSED DOCUMENT

OSLA = OTHER SPECIAL LICENSING AGREEMENTS

* = NOT FURNISHED - TO BE OBTAINED FROM:

DLA DOCUMENT SERVICES

BUILDING 4D

700 ROBBINS AVENUE

PHILADELPHIA, PA 19111-5094

HTTP://QUICKSEARCH.DLA.MIL/

IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.

D/A = DISTRIBUTION STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

D/E = DISTRIBUTION STATEMENT E - DISTRIBUTION AUTHORIZED TO DOD COMPONENTS ONLY.

EXP = EXPORT CONTROLLED DOCUMENT

EXPORT CONTROL STATEMENT

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

06/15/2023 AMCOM TDPL PAGE 20

STATUS FORMS REPORT

PART NUMBER: 14101260-2

PRON: D13F0248 RECORD NUMBER: 01

NSN: 1450-01-6874300

ATR REVIEW OF

ASTM-D543 CAGE : 81346

Category : 001 ODC Usage: Y

WAIV REQ : N

PRACTICES EVALUATING RESISTANCE PLASTICS CHEMICAL REAG

ASTM-D543 contains the following Class I ODC: carbon tetrachloride For spares/repair parts actions, tailoring is as follows:

Select any of the identified other 43 solvents/reagents for the procedures in this specification to determine the resistance of plastics to reagents.

No waiver is required if carbon tetrachloride is NOT used.

WATSON, SHERRY

Approved Technical Representative (ATR)

STATUS FORM PAGE 1

06/15/2023 AMCOM TDPL PAGE 21

STATUSFORM DEFICIENCY REPORT

PART NUMBER: 14101260-2

PRON: D13F0248 RECORD NUMBER: 01

NSN: 1450-01-6874300

CAGE DOCUMENT NUMBER -----------------REASON FOR DEFICIENCY-----------------

TOTAL STATUSFORM DEFICIENCIES : 0

06/15/2023 AMCOM TDPL PAGE 4

PART NUMBER: 14101260-2

PRON NUMBER: D13F0248

NSN: 1450-01-6874300

Weapon System: M-D6 NOUN: SKID,SHIPPING AND S

Packaging Specialist: O'CONNOR, DOUGLAS L. Phone: (256)876-3019 Date: 06/08/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 51.0 Length: 36.0 Width: 36.0 Depth: 12.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [B] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [51] JII/CD [1] JIII/PM [00] JIV/WM [00]

JV/CD [GH] JVI/CT [H] JVII/UC [ED] JVII/IC [00]

JIX/A/PK [F] JX/SM [ZZ] JVIIIA/OPI [M]

[X] 5. Supplemental Information

ZZ=TWO-MAN LIFT

[ ] 6. Reusable Container will be Government Furnished Material

User ID: kyork

08/21/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 13507227 WPN SYS: M-D6

PRON NUMBER: D13F0277

NSN: 6150-01-4446575

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

DP 18876 13507227 F N 0001/0001 PROC RESTRICTED TO SUP D/D

CABLE ASSY-AC POWER, W30 64059 EXP

08/21/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 13507227 WPN SYS: M-D6

PRON NUMBER: D13F0277

NSN: 6150-01-4446575

PACKAGING DOCUMENTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

NC 96906 MIL-STD-2073-1 E N 0001/0001 * D/A

08/21/2023 CONTRACT TDPL PAGE 3

PART NUMBER: 13507227

PRON: D13F0277

NSN: 6150-01-444-6575

TDPL LEGEND

DESCRIPTION OF SYMBOLS

SUP = SUPPRESSED DOCUMENT

* = NOT FURNISHED - TO BE OBTAINED FROM:

DLA DOCUMENT SERVICES

BUILDING 4D

700 ROBBINS AVENUE

PHILADELPHIA, PA 19111-5094

HTTP://QUICKSEARCH.DLA.MIL/

IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.

D/A = DISTRIBUTION STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

D/D = DISTRIBUTION STATEMENT D - DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

DOD CONTRACTORS ONLY.

EXP = EXPORT CONTROLLED DOCUMENT

EXPORT CONTROL STATEMENT

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

08/21/2023 AMCOM TDPL PAGE 4

PART NUMBER: 13507227

PRON NUMBER: D13F0277

NSN: 6150-01-4446575

Weapon System: M-D6 NOUN: CABLE ASSEMBLY,POWE

Packaging Specialist: O'CONNOR, DOUGLAS L. Phone: (256)876-3019 Date: 08/18/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 3.0 Length: 12.0 Width: 12.0 Depth: 4.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [B] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [41] JII/CD [1] JIII/PM [00] JIV/WM [00]

JV/CD [NA] JVI/CT [A] JVII/UC [ED] JVII/IC [00]

JIX/A/PK [F] JX/SM [00] JVIIIA/OPI [M]

[X] 5. Supplemental Information

COIL CABLE CAP/CUSHION CONNECTORS

[ ] 6. Reusable Container will be Government Furnished Material

10/23/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 13508140 WPN SYS: M-D6

PRON NUMBER: D14F0019

NSN: 5998-01-4973340

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

DP 18876 13508140 M N 0001/0002 PROC RESTRICTED TO SUP OSLA

CIRCUIT CARAD ASSY-CONROL PANEL 64059 D/E EXP

M N 0002/0002

10/23/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 13508140 WPN SYS: M-D6

PRON NUMBER: D14F0019

NSN: 5998-01-4973340

PACKAGING DOCUMENTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

NC 96906 MIL-STD-2073-1 E N 0001/0001 * D/A

10/23/2023 CONTRACT TDPL PAGE 3

PART NUMBER: 13508140

PRON: D14F0019

NSN: 5998-01-497-3340

TDPL LEGEND

DESCRIPTION OF SYMBOLS

SUP = SUPPRESSED DOCUMENT

OSLA = OTHER SPECIAL LICENSING AGREEMENTS

* = NOT FURNISHED - TO BE OBTAINED FROM:

DLA DOCUMENT SERVICES

BUILDING 4D

700 ROBBINS AVENUE

PHILADELPHIA, PA 19111-5094

HTTP://QUICKSEARCH.DLA.MIL/

IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.

D/A = DISTRIBUTION STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

D/E = DISTRIBUTION STATEMENT E - DISTRIBUTION AUTHORIZED TO DOD COMPONENTS ONLY.

EXP = EXPORT CONTROLLED DOCUMENT

EXPORT CONTROL STATEMENT

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

10/23/2023 AMCOM TDPL PAGE 4

PART NUMBER: 13508140

PRON NUMBER: D14F0019

NSN: 5998-01-4973340

Weapon System: M-D6 NOUN: CIRCUIT CARD ASSEMB

Packaging Specialist: PRYOR, DARIUS Phone: (256)876-3327 Date: 10/17/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 2.9 Length: 13.5 Width: 13.5 Depth: 4.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [B] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [GX] JII/CD [1] JIII/PM [00] JIV/WM [K3]

JV/CD [LT] JVI/CT [A] JVII/UC [NS] JVII/IC [00]

JIX/A/PK [F] JX/SM [39] JVIIIA/OPI [M]

[ ] 5. Supplemental Information

[ ] 6. Reusable Container will be Government Furnished Material

10/18/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 13507350 WPN SYS: M-D6

PRON NUMBER: D14F0020

NSN: 5998-01-4408037

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

DP 18876 13507350 L N 0001/0002 PROC RESTRICTED TO SUP OSLA

CIRCUIT CARD ASSY-PROCESSOR POWER MODULE 64059 D/E EXP

L N 0002/0002

10/18/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 13507350 WPN SYS: M-D6

PRON NUMBER: D14F0020

NSN: 5998-01-4408037

PACKAGING DOCUMENTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

NC 96906 MIL-STD-2073-1 E N 0001/0001 * D/A

10/18/2023 CONTRACT TDPL PAGE 3

PART NUMBER: 13507350

PRON: D14F0020

NSN: 5998-01-440-8037

TDPL LEGEND

DESCRIPTION OF SYMBOLS

SUP = SUPPRESSED DOCUMENT

OSLA = OTHER SPECIAL LICENSING AGREEMENTS

* = NOT FURNISHED - TO BE OBTAINED FROM:

DLA DOCUMENT SERVICES

BUILDING 4D

700 ROBBINS AVENUE

PHILADELPHIA, PA 19111-5094

HTTP://QUICKSEARCH.DLA.MIL/

IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.

D/A = DISTRIBUTION STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

D/E = DISTRIBUTION STATEMENT E - DISTRIBUTION AUTHORIZED TO DOD COMPONENTS ONLY.

EXP = EXPORT CONTROLLED DOCUMENT

EXPORT CONTROL STATEMENT

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

10/18/2023 AMCOM TDPL PAGE 4

PART NUMBER: 13507350

PRON NUMBER: D14F0020

NSN: 5998-01-4408037

Weapon System: M-D6 NOUN: CIRCUIT CARD ASSEMB

Packaging Specialist: PRYOR, DARIUS Phone: (256)876-3327 Date: 10/17/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 1.9 Length: 10.5 Width: 10.5 Depth: 4.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [B] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [GX] JII/CD [1] JIII/PM [00] JIV/WM [K3]

JV/CD [LT] JVI/CT [A] JVII/UC [NS] JVII/IC [00]

JIX/A/PK [F] JX/SM [39] JVIIIA/OPI [M]

[ ] 5. Supplemental Information

[ ] 6. Reusable Container will be Government Furnished Material

User ID: sweather