17370-100.pdf

02/09

02/09

A 1. UPDATED NOTE 2 9/28/09 FCL

ZONE REV DESCRIPTION

REVISIONS

DATE APPROVED

IG 02/09

FCL 02/09

15930 C

CONTAINER

NAMEPLATE

CAGE

CODE

QTY

REQ'D

PART NO.

IDENTIFY NUMBER

DATA: SPECIFICATION

NOTES, VENDORSNO.

ITEM

LENGTH

OD/ID

WIDTH

GAUGE

THICK

MATERIAL

NOMENCLATURE

OR DESCRIPTION

PARTS LIST

OF1

2/12/09

ARE IN INCHES

SPECIFIED DIMS

UNLESS OTHERWISE

USED ON

APPLICATION

NEXT ASSEMBLY

REVSIZE

DATE

DATE

DATE

DATEAPPROVED BY

QC APPROVED BY

CHECKED BY

DRAWN BY

DATE:

CONTRACT NUMBER

SHEET:WEIGHT:SCALE:

CAGE CODE DWG NO.

PHILADELPHIA,PA700 ROBBINS AVE.

NAVAL INVENTORY CONTROL POINT

B 80132

TOLERANCES ON:

.01 - .03RBREAK EDGES:

-.001 +.007

±.010 ±.015

HOLE SIZES:

BEND R .00 TO .09:

.091 AND ABOVE:

FRACTIONS: 1/16

ANGLES: 2°

DECIMALS:

.XX

.XXX

.X ±

.1

.06

.015

JVD

RWC

B 1. REVISED NOTE 5, ADDED NOTE 8 10/30/09 FCL

C 1. DESIGN P/N WAS MFR P/N 4/10/17 FCL

2. MFR/CAGE WAS MFR

1 15930 NAMEPLATE NOTE 2 .012 4.00 4.00

CAD MAINTAINED, CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.

NOTES:

1. CHARACTERS TO BE GOTHIC BOLD. LOCATE TEXT APPROXIMATELY AS SHOWN. TEXT

SIZE TO BE APPROXIMATELY AS SHOWN.

2. MATERIAL: .012 (.03MM) MINIMUM THICKNESS, PHOTOSENSITIVE, ANODIZED

ALUMINUM PLATE, HIGH STRENGTH ADHESIVE BACKED. RIVETS WILL BE USED TO

SECURE THE NAMEPLATE AND WILL BE SEALED ACCORDINGLY IF THE PRESSURE

BOUNDARY IS PENETRATED.

3. CHARACTERS AND DATA MATRIX TO BE BLACK ON A NATURAL BACKGROUND.

4. REFERENCE SPECIFICATION MIL-DTL-15024, TYPE H, STYLE IV.

5. CONTACT NAVSUP CODE N241.10 FOR ASSIGNMENT OF SERIAL NUMBER(S).

6. DATA MATRIX ECC 200 SYMBOL USING ISO 15434 SYNTAX AND THE SEMANTICS OF ISO

15418. SUBSTITUTE “R

S” SYMBOL WITH ASCII CODE 30, “G

S” SYMBOL WITH ASCII CODE

29, AND “E

OT” WITH ASCII CODE 4. EXACT CONTENTS OF MATRIX TO BE THE

FOLLOWING, ALL AS ONE CONTINUOUS STRING, WITHOUT SPACES:

[)>R

S06G S17V(vendor cage)G

S1P(container p/n)G SS [(program acronym)-SERIAL NO.]R

S E

OT

EXAMPLE, FOR SERIAL NUMBER 0001:

[)>R

S06G S17V80132G

S1P779E001-1G

SSARS-0001R

S E

OT

7. FOR REFERNCE ONLY: INFORMATION IS BASED ON UII CONSTRUCT #2: CAGE CODE,

ORIGINAL PART NO., SERIAL NO., AND DATA IDENTIFIERS (FORMAT 06).

8. ANY VARIATION TO THE NAMEPLATE (I.E. SIZE, MOUNTING HOLE DIMENSION AND

LOCATION, OR NOMENCLATURE) SHALL BE APPROVED BY NAVICP.

O .2194X

4.00

4.00

.192X

3.622X

.192X 3.622X

.012 MIN.

NOTES 5 & 6

NOTE 5

R .194X

.1511X

"Distribution Statement D: Distribution authorized to the Department of Defense and U.S. DoD contractors only, vulnerability information, 11

October 2012, other requests shall be referred to Commanding Officer Naval Supply Weapon Systems Support Philadelphia Pennsylvania 19111

(Attn Code N241.10)"

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.)

or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.) as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

Destruction Note - Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Richar d Averill

2007.09.

13:41:42 -04'00'

Richar d Averill

2007.09.

14:06:30

Richa rd Averill

2007.0 6.21 15:07:4

NOTES:

1. INTERPRET DRAWING IAW MIL-STD-100.

2. MATERIAL: SILICONE SPONGE CORDING, CLOSED CELL SOLID ROUND GASKETING IAW

MIL-STD-670B, EXCEPT AS NOTED. SIZE: Ø.406 +.035, -.015. FOR GRADE SEE

SUGGESTED SOURCE.

3. DENSITY RANGE: (25 - 40 PCF) (0.40 - 0.65 G/CC) GENERAL CLASSIFICATION: ASTM D

1056, TYPE 1 OR 2, CLASS D, GRADE 2.

4. COLOR- LIGHT TO MEDIUM GRAY

5. SUGGESTED COURSE OF MATERIAL:

5.1 HARDIGG INDUSTRIES

147 NORTH MAIN STREET

SOUTH DEERFIELD, MA 01373

P/N: P21-473-8

5.2 LAUREN MFG CO

NEW PHILADELPHIA, OHIO

CAGE CODE NO. 56329

MAT'L NO SS-O-1166, CLOSED CELL SILICONE SPONGE CORING IAW

MIL-STD-670B, GRADE TE12 EXCEPT THAT LOW TEMPERATURE PERFORMANCE

WILL BE IAW ASTM D 1056, 2D2/2D3. REF: MULTI-CAVITY DIE #80441.

HARDIGG NO 1-090-00249.

5.2.1. SUPPLIED AS SINGLE STRAND COIL STOCK.

5.2.2. TEST VERIFICATION FOR DENSITY, DIMENSIONS AND

HI-TEMPERATURE COMPRESSON SET TO BE SUPPLIED WITH

EACH STRAND LOT.

5.3 VANGUARD PRODUCTS CORP

87 NEWTOWN ROAD

DANBURY, CT 06810

MATERIAL P/N XSSP-2406

VANGUARD COMPOUND VC3004

HARDNESS 21±5, SHORE A

DENSITY 0.60 G/CC ±0.1

SUPPLIED AS COIL STOCK.

6. BOND ENDS OF GASKET TOGETHER WITH ADHESIVE MIL-A-46106, TYPE 1.

34 2 1

34 2 1

B

A

D

B

A

D

C

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER

GASKET, CORDING, SILICONE

17370-0112

17370-0112

A

A

17370-100 1

17370-102 N/A

MARC SERRA 07-06-01MARC SERRA 07-06-01

3rd Angle Dimensions in Inches

.25

RICK AVERILL 07-08-13 RICK AVERILL 07-08-13

ADDED TOLERANCE IN TITLE BLOCK. REMOVED

PART ID FROM TABLE.

038293A JAVO

07SEP17

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

168" AL6815

LENGTH CNTNR SIZE

Richard Averill

2007.09.18 09:08:38

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CONTAINER ASSEMBLY,

AL6815-1005

17370-100

17370-100

B

B

17370-100 1

OF

FINAL 1/4

.19

MARC SERRA 07-04-04MARC SERRA 07-04-18

3rd Angle Dimensions in Inches

RICK AVERILL 07-07-25 RICK AVERILL 07-07-25

REMOVED PROPRIETARY STATEMENT FROM

TITLE BLOCK.

038281A JAVO

07SEP17

ADDED NOTE(S) 4 REGARDING DIMENSIONS AND

WEIGHTS.

038376B JAVO

07SEP26

RICK AVERILL

07SEP17

1 1 17370-101 CONTAINER BASE ASSEMBLY, AL6815-10XX

2 1 17370-102 CONTAINER LID ASSEMBLY, AL6815-XX05

ITEM QTY. CAGE DWG NO. / PART NO. DESCRIPTION NOTES

70.7

18.0

4.50 3X

.498X

23.132X 5.873X

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

11214

11214

NOTES:

1. INTERPRET DRAWING IAW ASME Y14.100

2. FIRST ARTICLE TEST

2.1. THE FIRST ARTICLE TESTS LISTED BELOW SHALL BE PERFORMED WHEN THE CONTAINER IS BEING MADE BY A MANUFACTURER WHO HAS NOT PREVIOUSLY SUBMITTED AN APPROVED FIRST ARTICLE

SAMPLE.

2.2. THE EMPTY CONTAINER ASSEMBLY SHALL UNDERGO A PHYSICAL EXAMINATION TO THE DRAWING

PACKAGE.

2.3. FREE FALL DROP TEST- THE CONTAINER SHALL BE DROPPED FROM 18" IAW ASTM D 4169, DISTRIBUTION

CYCLE 18, ASSURANCE LEVEL 1, ACCEPTANCE CRITERION 1 (PRODUCT IS DAMAGE FREE)

2.4. LATERAL IMPACT TEST- CONDUCT 9" FREE FALL DROP TESTS TO SIMULATE LATERAL IMPACT TESTS. ONE

DROP EACH ON FRONT, REAR, RIGHT END AND LEFT END.

2.5. VIBRATION TEST

2.5.1. RESONANCE TEST- CONDUCT IAW ASTM D 4169, DISTRIBUTION CYCLE 18, ASSURANCE LEVEL 1, ACCEPTANCE CRITERION 1, SCHEDULE E, VEHICLE VIBRATION, SINE TEST OPTION.

2.5.2. RESONANCE DWELL TEST- CONDUCT A RESONANCE DWELL TEST FOR 15 MINUTES AT EACH MAJOR

RESONANCE IDENTIFIED IN 2.5.1. EXAMINE THE DUMMY LOAD AND CUSHION FOR DAMAGE.

2.6. STACKING TEST- STACK TWO CONTAINERS ON A 15 DEGREE INCLINED SURFACE TO VERIFY LID/BASE INTERLOCK

FEATURE.

2.7. PNEUMATIC LEAK TEST- IAW METHOD 5009 OF MIL-STD-3010: STABILIZE INTERNAL CONTAINER PRESSURIZE AT 0.50+/-.01 PSIG FOR 30 MINUTES. CHECK FINAL PRESSURE AFTER ADDITIONAL 30 MINUTES. PRESSURE

DROP MUST NOT EXCEED 0.05 PSIG.

2.8. VACUUM TEST- IAW METHOD 5009 OF MIL-STD-3010: STABILIZE INTERNAL CONTAINER PRESSERIZE AT A VACUUM OF 0.50+/-.01 PSIG FOR 30 MINUTES. CHECK FINAL PRESSURE AFTER ADDITIONAL 30 MINUTES.

PRESSURE INCREASE MUST NOT EXCEED 0.05 PSIG.

3. PRODUCTION LEAK TEST- SAMPLE PER ANSI/ASQ Z1.4, SAMPLE PLAN S-2, AQL 1.0, ACCEPT 0, REJECT 1.

ONE REJECT WILL REQUIRE 100% OF THE LOT TO BE TESTED.

3.1. TEST REQUIREMENTS- FLAT BOTTOM UNINSTRUMENTED DROP FROM 18" FOLLOWED BY PNEUMATIC LEAK TEST.

USING METHOD 5009 OF MIL-STD-3010, STABILIZE AT 0.50+/-.01 PSIG FOR 15-30 MINUTES AND THEN TEST FOR

30 MINUTES. MAXIMUM ALLOWABLE PRESSURE DROP IS 0.05 PSIG.

4. DIMENSIONS / WEIGHTS

4.1. CONTAINER OUTSIDE DIMENSIONS: 70.7"L X 18.0"W X 21.5"H

4.2. CONTAINER EMPTY WEIGHT: 89 LBS

CONTAINER LOADED WEIGHT: 264 LBS

21.5

Richard Averill

2007.10.01 10:39:17

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CONTAINER BASE ASSEMBLY,

AL6815-10XX

17370-101

17370-101

C

C

17370-100 2

OF

17370-100 1/4

.19

RICK AVERILL 07-04-12MARC SERRA 07-04-18

3rd Angle Dimensions in Inches

A1: ADDED TOLERANCE +/- .38038043A DAVE BARNES

07AUG17

RICK AVERILL 07-08-17 RICK AVERILL 07-08-17

NOTE 1 WAS HUM. IND. & VIEWPORT INSTALLATION

HOLE SIZE. SECTION C-C SHOWED T-NUT IN

BACKWARDS.

038285B JAVO

07SEP17

RICK AVERILL

07AUG17

ADDED NOTES 5, 6 & 7.038394C JAVO

07SEP28

RICK AVERILL

07SEP17

FRONT VIEW

29.00 29.0012

17 12

A

A

B

B C

C

5.50

NOTES:

1 DELETED.

2 CUSHIONS (ITEMS 17 & 18 TO BE POSITIONED APPROXIMATELY AS SHOWN

AT ENDS OF CONTAINER.

3 POSITION FRONT INDEXING LABEL (ITEM 22) APPROXIMATELY AS SHOWN.

4 CENTER RIB STIFFENERS (ITEM 19) ON RIBS AS SHOWN.

5 TIGHTEN SCREW UNTIL SEALING WASHER ELASTOMERIC COMPOSITION

STARTS TO EXTRUDE FROM AROUND EDGE OF WASHER.

6 TORQUE ITEM 4 TO 19-24 IN-LBS.

7 TORQUE ITEM 9 TO 50-55 IN-LBS.

1.03

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

3.75 10X

1 14 1730AS221 CATCH, HNY

2 28 CCP-42 RIVET

3 6 1730AS236 HANDLE, PLASTIC

4 24 6Z992 1730AS237 SCREW ASSEMBLY

5 4 P21-527-03 LIFTING GRIP, SST

6 8 11214 P021-0530 GASKET, PL, BUP, EPDM.

7 4 P21-0528-01 PL,BU,AL,P21-0528-01

8 4 11214 P021-0529 GASKET, PL, BUP, NPRN.

9 20 10-24 X 7/8 SCR,HEX HD,SST

10 26 10-24 NUT,HEX,SST,ESNA

11 26 N/A #10 WASHER, FLAT, SST

12 3 P62-6 SKID RUNNER

13 24 DAS-50M04-000 WSHR,FABCO,7/16X7/8

14 12 3/8-16 X 1 SCR,HEX HD,SST

15 A/R 242 ADHESIVE, LOCTITE

16 1 17370-103 CUSHION, BASE, MID, AL6815-10XX

17 1 17370-104 CUSHION, BASE, LEFT, AL6815-10XX

18 1 17370-105 CUSHION, BASE, RIGHT, AL6815-10XX

19 2 17370-111 STIFFENER, RIB

20 6 10-24X.75 SCR, BTNHD, SOC, SST

21 6 DAS-25B06-000 WSHR,FABCO,13/64 X 1/2

22 1 P100-8 GRAPHICS, MOLDED-IN, FRONT INDEXING

ITEM QTY. CAGE DWG NO. / PART NO. DESCRIPTION NOTES

BOTTOM VIEW

EE

SECTION E-E

1:1

191011

12.38 12.38

Richard Averill

2007.10.0 1 16:37:52

SI

ZE

CA

GE

C O

DE

D W

G

NO

RE

V

S

CA

LE

S

HE

ET

D

D D C B A

ABC

DWG NO SH REV

CO

M

PU

TE

R

CO

NT

RO

LL

ED

D

OC

U M

EN

T

M

AN

U

AL

C

HA

NG

ES

N

OT

A

LL

OW

ED

0-

17370-101

C

C

1/

SE

CT

IO

N

A- A

2:

SE

CT

IO

N

B- B

1:1

RI

GH

T

SI

DE

V

IE

W

OF

TO

P

VI

EW16

.2

±.3

SE

CT

IO

N

C- C

1:114

A1

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CONTAINER LID ASSEMBLY,

AL6815-XX05

17370-102

17370-102

C

C

17370-100 2

OF

17370-100 1/4

.19

MARC SERRA 07-04-12MARC SERRA 07-04-13

3rd Angle Dimensions in Inches

A1: ITEM 3 WAS TA330-.25C-.25C-R A2: ITEM 4

WAS WAS P021-0433 A3: ITEM 8 WAS P021-473.

038031A DAVE BARNES

07AUG15

B1: ADDED TOLERANCE +/- .38038042B DAVE BARNES

07AUG17

RICK AVERILL

07AUG15

RICK AVERILL 07-08-17 RICK AVERILL 07-08-17

ADDED NOTE 8.038395C JAVO

07OCT01

RICK AVERILL

07AUG17

VIEW LOOKING INTO LID

1 14 1730AS222 STRIKE, HNY

2 28 CCP-42 RIVET

3 1 P021-1522 RELIEF VALVE +/- .25 PSIG

4 1 17268-107 LABEL RELIEF VALVE

5 1 P21-0598 HUMIDITY INDICATOR

6 2 P21-0533 PORT, OBSERVATION

7 1 17370-106 CUSHION, LID, AL6815-XX05

8 168 " 17370-0112 GASKET, CORDING, SILICONE

9 A/R 1GXG2 RTV, GE 108 RTV, CLR, ADHESIVE SEALANT

10 1 P100-8 GRAPHICS, MOLDED-IN, FRONT INDEXING

11 4 17370-111 STIFFENER, RIB

12 24 10-24X.75 SCR, BTNHD, SOC, SST

13 24 DAS-25B06-000 WSHR,FABCO,13/64 X 1/2

14 24 N/A #10 WASHER, FLAT, SST

15 24 10-24 NUT,HEX,SST,ESNA

16 1 17370-110 PLATE, IDENTIFICATION

17 4 AD68H,M24243/6A608H RIVET

18 4 O2697 2-008 O-RING, NEOPRENE

19 4 11214 P021-0236-03 WASHER, O-RING SEAL

20 4 11214 P21-0882-01 WSHR, S-BUP, SSP, 3/16 I.D.

ITEM QTY. CAGE DWG NO. / PART NO. DESCRIPTION NOTES

FRONT VIEW

4.00 2X

1.00

1.00

1.002X

4.00

15.25 ±.38

CNTNR FRONT

8 9

NOTES:

1. INTERPRET DRAWING IAW ASME Y14.100.

2 GASKET TO BE CLOSED LOOP.

3 INSTALLATION HOLE TO BE Ø1.06 ±.03.

4 POSITION FRONT INDEXING LABEL (ITEM 10) APPROXIMATELY AS SHOWN.

5 STENCIL IN .50 HIGH CHARACTERS USING BLACK EPOXY INK IAW A-A-56032D. CENTER

APPROXIMATELY AS SHOWN IN AREA PROVIDED.

6 LOCATE DIAGONALLY OPPOSITE ON REAR OF CONTAINER.

7 CENTER RIB STIFFENERS (ITEM 11) ON RIBS AS SHOWN. SEE SHEET 2.

8 TIGHTEN SCREW UNTIL SEALING WASHER ELASTOMERIC COMPOSITION STARTS TO

EXTRUDE FROM AROUND EDGE OF WASHER.

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

5.00

1.03

3.38 2X4.50

6X

56 5 6

2RIGHT SIDE VIEW

A1

A2

A3

B1

Richard Averill

2007.10.0 1 10:40:24

SI

ZE

CA

GE

C O

DE

D W

G

NO

RE

V

S

CA

LE

S

HE

ET

D

D D C B A

ABC

DWG NO SH REV

CO

M

PU

TE

R

CO

NT

RO

LL

ED

D

OC

U M

EN

T

M

AN

U

AL

C

HA

NG

ES

N

OT

A

LL

OW

ED

0-

17370-102

C

C

1/

TO

P

VI

EW

7.

.6

2X

OF

RI

GH

T

SI

DE

V

IE

W

1:2

1.2

3.

752X

1.5

A A

5.

5.

.3

.3

SE

CT

IO

N

A- A

2:

B B

SE

CT

IO

N

B-

BC

DE

TA

IL

C

2.

1.3

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CUSHION, BASE, MID,

AL6815-10XX

17370-103

17370-103

17370-100 1

OF

17370-101 1/2

RICK AVERILL 07-04-12MARC SERRA 07-04-12

HARDIGG® INDUSTRIES, INC. USA

TOLERANCE FOR POLYETHYLENE FOAM CUSHIONS

CAVITY DIM. UP TO 6”

CAVITY DIM. OVER 6” TO 18”

CAVITY DIM. OVER 18” TO 36”

CAVITY DIM. OVER 36”

LOCATION OF CUTOUTS

OUTSIDE DIM. UP TO 18”

OUTSIDE DIM. 18” TO 36”

OUTSIDE DIM. OVER 36”

ALL ANGLES

ALL OTHER DIMS.

+.09 -.06 +.12 -.09 +.25 -.09 +.31 -.09 +.12 -.12 +.09 -.19 +.12 -.25 +.19 -.31 +5O -5O

+.12 -.12

3rd Angle Dimensions in Inches

1:4

4.00 6X

5.002X

16.502X

32.00 ±.38

4.004X

3.23

7.50

NOTES:

1. MAT'L: POLYETHYLENE CROSS-LINKED FOAM IN ACCORDANCE WITH

A-A-59136, CLASS 1, GRADE A, TYPE I. (2PCF X-LINK)

2. ASSEMBLE CUSHION USING 3M SPRAY 90, HOT MELT ADHESIVE, OR

ENGINEERING APPROVED EQUIVALENT.

R 4.19

4.003X

8.00

CNTNR FRONT

24.00

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATIONS OF

THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS, ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

A

A

SECTION A-A

3.12 8.00

8.00 2X

3.502X 15.00

14.25.38

1.004X

1.006X

Richard Averill Reason: Checked Date: 2007.09.17 13:37:08 -04'00'

Richard Averill Dwg Approval

2007.09.17 13:37:27 -04'00'

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CUSHION, BASE, LEFT,

AL6815-10XX

17370-104

17370-104

17370-100 1

OF

17370-101 1/2

RICK AVERILL 07-04-12MARC SERRA 07-04-12

HARDIGG® INDUSTRIES, INC. USA

TOLERANCE FOR POLYETHYLENE FOAM CUSHIONS

CAVITY DIM. UP TO 6”

CAVITY DIM. OVER 6” TO 18”

CAVITY DIM. OVER 18” TO 36”

CAVITY DIM. OVER 36”

LOCATION OF CUTOUTS

OUTSIDE DIM. UP TO 18”

OUTSIDE DIM. 18” TO 36”

OUTSIDE DIM. OVER 36”

ALL ANGLES

ALL OTHER DIMS.

+.09 -.06 +.12 -.09 +.25 -.09 +.31 -.09 +.12 -.12 +.09 -.19 +.12 -.25 +.19 -.31 +5O -5O

+.12 -.12

3rd Angle Dimensions in Inches

8.00 4X

4.00 4X

30°4X

15.00

4.004X 2.25

3.50 1.00

.754X

1:4

NOTES:

1. MAT'L: POLYETHYLENE CROSS-LINKED FOAM IN ACCORDANCE WITH A-A-59136, CLASS 1, GRADE A, TYPE I. (2PCF X-LINK)

2. ASSEMBLE CUSHION USING 3M SPRAY 90, HOT MELT ADHESIVE, OR ENGINEERING APPROVED

EQUIVALENT.

3. MAT'L: POLYETHYLENE FOAM IN ACCORDANCE WITH A-A-59136, CLASS 1, GRADE A, TYPE V. (9PCF PE)

15.25

.50

CNTNR FRONT

2.00 4X

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

4.50

Richard Averill Reason: Checked Date: 2007.09.17 13:38:04 -04'00'

Richard Averill

Dwg Approval

2007.09.17 13:38:50

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CUSHION, BASE, RIGHT,

AL6815-10XX

17370-105

17370-105

17370-100 1

OF

17370-101 1/2

RICK AVERILL 07-04-12MARC SERRA 07-04-12

HARDIGG® INDUSTRIES, INC. USA

TOLERANCE FOR POLYETHYLENE FOAM CUSHIONS

CAVITY DIM. UP TO 6”

CAVITY DIM. OVER 6” TO 18”

CAVITY DIM. OVER 18” TO 36”

CAVITY DIM. OVER 36”

LOCATION OF CUTOUTS

OUTSIDE DIM. UP TO 18”

OUTSIDE DIM. 18” TO 36”

OUTSIDE DIM. OVER 36”

ALL ANGLES

ALL OTHER DIMS.

+.09 -.06 +.12 -.09 +.25 -.09 +.31 -.09 +.12 -.12 +.09 -.19 +.12 -.25 +.19 -.31 +5O -5O

+.12 -.12

3rd Angle Dimensions in Inches

1:4

15.25

2.00 4X

8.00 2X

4.00 2X

30°4X

3.50

8.00

2.00

4.00

.752X

4.002X

AA

SECTION A-A

2.00

4.00

CNTNR FRONT

NOTES:

1. MAT'L: POLYETHYLENE CROSS-LINKED FOAM IN ACCORDANCE WITH A-A-59136, CLASS 1, GRADE A, TYPE I. (2PCF X-LINK)

2. ASSEMBLE CUSHION USING 3M SPRAY 90, HOT MELT ADHESIVE, OR ENGINEERING APPROVED

EQUIVALENT.

3 ATTACH HDPE LOAD SPREADER (17370-107) TO CUSHION USING 3M SPRAY 90.

4 STENCIL USING BLACK MARSH STENCIL INK, 1" HIGH CHARACTERS, CENTERED APPROXIMATELY AS

SHOWN.

5 STENCIL USING BLACK MARSH STENCIL INK, .50" HIGH CHARACTERS, CENTERED APPROXIMATELY AS

SHOWN.

16.00 2X

11.38

4.00

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

2.003.50

15.00

.38 .38

4 5

Richard Averill Reason: Checked Date: 2007.09.17 13:39:22 -04'00'

Richard Averill

Dwg Approval 2007.09.17 13:39:41 -04'00'

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

CUSHION, LID, AL6815-XX05

17370-106

17370-106

17370-100 1

OF

17370-100 1/2

RICK AVERILL 07-04-09MARC SERRA 07-04-11

HARDIGG® INDUSTRIES, INC. USA

TOLERANCE FOR POLYETHYLENE FOAM CUSHIONS

CAVITY DIM. UP TO 6”

CAVITY DIM. OVER 6” TO 18”

CAVITY DIM. OVER 18” TO 36”

CAVITY DIM. OVER 36”

LOCATION OF CUTOUTS

OUTSIDE DIM. UP TO 18”

OUTSIDE DIM. 18” TO 36”

OUTSIDE DIM. OVER 36”

ALL ANGLES

ALL OTHER DIMS.

+.09 -.06 +.12 -.09 +.25 -.09 +.31 -.09 +.12 -.12 +.09 -.19 +.12 -.25 +.19 -.31 +5O -5O

+.12 -.12

3rd Angle Dimensions in Inches

1:4

CNTNR FRONT

5.002X

32.00

4.004X

5.12

2.12 4X

NOTES:

1. MAT'L: POLYETHYLENE CROSS-LINKED FOAM IN ACCORDANCE WITH

A-A-59136, CLASS 1, GRADE A, TYPE I. (2PCF X-LINK)

2. ASSEMBLE CUSHION USING 3M SPRAY 90, HOT MELT ADHESIVE, OR

ENGINEERING APPROVED EQUIVALENT.

.754X

15.00

5.50 4.00

.62

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

12.00

20.50 4.502X

.502X

Richard Averill Reason: Checked Date: 2007.09.17 13:40:11 -04'00'

Richard Averill

Dwg Approval 2007.09.17 13:40:38 -04'00'

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

PLATE, LOAD SPREADER, HPDE

17370-107

17370-107

17370-107 1

OF

17370-104, -105 1/2

.06 .010 5°

RICK AVERILL 07-04-12MARC SERRA 07-04-12

3rd Angle Dimensions in Inches

1:2

NOTES:

1. MAT'L: HDPE SHEET, .25 THICK, COLOR BLACK.

2. INSIDE BEND RADII TO BE .31.

3. BREAK ALL SHARP EDGES.

4. BEND ANGLE CAN VARY BETWEEN THE GIVEN VALUES.

20° - 40°

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS,

ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO COMMANDING OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

FLAT PATTERN

15.37

13.27

26°2X

14.75

13.37 2X

15.30

Richard Averill

Reason: Checked Date: 2007.07.25 10:30:59 -04'00'

Richard Averill

Dwg Approval 2007.07.25 10:31:12 -04'00'

34 2 1

B

A

D

B

A

D

C

REVISION HISTORY

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

REF:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

HARDIGG INDUSTRIES, INC.

South Deerfield, Massachusetts 01373 USA

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

NAVICP

ALFS TRANSDUCER ASSEMBLY

PLATE, IDENTIFICATION

17370-110

17370-110

17370-100 1

17370-101 1/1

.03

MARC SERRA 07-05-01MARC SERRA 07-05-01

.010

3rd Angle Dimensions in Inches

.252X 3.502X

4.00

.252X

3.502X

4.00

R .254X

O .2034X

NOTES:

1. MAT'L: .012 MIN. ALUM. PLATE, HIGH STRENGTH ADHESIVE BACKED.

2. CHARACTERS TO BE NEWS GOTHIC BOLD, HEIGHT .20

3. CHARACTERS TO BE BLACK ON A NEUTRAL BACKGROUND.

4. I.D. PLATE IAW MIL-DTL-15024, TYPE H.

5. LINES OF CHARACTERS TO BE CENTERED EXCEPT AS SHOWN.

6. INSERT NSN PREFIX & SUFFIX, CONTRACT NUMBER, AND

SERIAL NUMBER FROM TABLE.

SEE TABLE

WORK ORDER NO. SERIAL NO. PREFIX SUFFIX

"NSN" NAT'L STOCK NO.

6KH0001100452DE-001 CB

DATE

07MAR20

6KH0002 THRU 0060100453DE-001 CB07MAR20

CONTRACT NUMBER

N00383-07-C-F024

N00383-07-C-F024

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS, ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO COMMANDING OFFICER, NAVAL

INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

Richard Averill

Reason: Checked Date: 2007.07.25 16:16:11 -04'00' Richard Averill

Dwg Approval

2007.07.25 16:26:55

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

NAVICP

ALFS TRANSDUCER ASSEMBLY

STIFFENER, RIB

17370-111

17370-111

A

A

17370-100 1

OF

17370-101, -102 1/1

.06 .010

MARC SERRA 07-05-10MARC SERRA 07-05-10

3rd Angle Dimensions in Inches

A1 WAS .030.038414A RACHEL DAVINI

07OCT04

NOTES:

1. MAT'L: ALUMINUM SHEET, 5052-H32, .09 THICK.

2. INSIDE BEND RADII TO BE .38.

3. DIMENSIONS TO RADII ARE TO THEORETICAL PLANE INTERSECTIONS.

4. BREAK ALL SHARP EDGES.

5. CLEAN AND DEGREASE.

12.00

.753X

5.253X

10.503X

O .2039X

FLAT PATTERN

1.81 3X

1.81 3X

.70 1.22

.70 1.22

DESTRUCTION NOTE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATIONS OF

THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISTRIBUTION STATEMENT C:

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS, ADMINISTRATION OR OPERATIONAL USE, OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO COMMANDING

OFFICER, NAVAL INVENTORY CONTROL POINT, PHILADELPHIA, PA 19111.

3.90

.52

1.95

1.58

.892X

.79

2X r .090 A1

Richard Averill

2007.10.0 4 12:00:52

2:1

A A

SECTION A-A

R 0.070 MAX

34 2 1

34 2 1

B

A

D

B

A

D

C

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

REF:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG INDUSTRIES

WASHER, O-RING SEAL

P021-0236-03

P021-0236-03

M

M

P21 1

2/1

.010 1

B. BALDWIN 81-09-20

G. DANIELS 81-12-04 N. BARSTOW 81-12-16

K 24585

REVISED & REDRAW IN SOLID

EDGE CHANGED NOTE 3 WAS

QQ-S-766 & QQ-P-35A

TL

00-01-06

1-030-28030

ITEM #2 MAT'L SPEC. WAS IAW ASTM-A66-98.032048L MIKE FECTEAU

04JAN19

SPRAGUE

99-11-24

RADIUS WAS 0.035. ADDED STOCK GAGE

THICKNESS IN NOTE 2.

036000M JAVO

06APR28

TL

04JAN22

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

O 0.194 ±.002

O 0.750 ±.015

0.105

0.045 ±.005

R 0.035 MAX

0.333

30°

TYP

NOTES:

1. INTERPRET DRAWING IAW DOD-STD-100 & ASME Y14.100 M

2. MAT'L: SST 304 IAW ASTM-A666-98, 17 GAGE STOCK (.0562).

3. FINISH: PASSIVATED IAW SAE-AMS-QQ-P-35

4. DIMENISIONS TO RADII ARE TO THEORETICAL PLANE INTERSECTIONS.

5. FOR SPARE PARTS PROVISIONING ONLY: MARK IN ACCORDANCE WITH

MIL-STD-130, BAG AND TAG.

MFR CAGE-PART NUMBER

I.E. 11214-P21-236-3.

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED

THIRD ANGLE PROJECTION

Norm Barstow

Digitally signed by Norm Barstow DN: cn=Norm Barstow, c=US, o=Hardigg Cases, ou=Design group, email=NormB@hardigg.com Date: 2006.04.29 10:01:35 -04'00'

B

A

D

B

A

D

C

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

REF:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

HARDIGG INDUSTRIES, INC.

South Deerfield, Massachusetts 01373 USA

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG INDUSTRIES

PL,BU,AL,P21-0528

P021-0528

P21-0528

K

K

P21 1

1/1

B. BALDWIN 81-10-01

G. DANIELS 81-12-04 N. BARSTOW 81-12-16

.06

VENDOR ITEM DRAWING

HARDIGG INDUSTRIES

REDRAWN WITH CHANGES TO SOLID EDGE.

NOTE 1 WAS "NIELSON HARDWARE CORP".

NOTE 7 WAS "SUGGESTED SOURCE LISTED IS

THE ONLY KNOWN SOURCE FOR THE

DESCRIBED AT THIS TIME."

C. HUMPHREY

00-06-22

J 25456

P21-0528

P21-052

ADDED DISTIBUTION STATMENT A038026K DAVE BARNES

07AUG15

T.LYNDS

00JUL10

.12 ±.01 r .01 -A-

1.62

.21

3.30

.6901.5001.500

2.19

4.38 -C-

R .75(4X )

2.250

-B-

.53

O .19 +.015 -.0005X

Ø .03 M A B C Ø .007 M A

4.75

6 .56(2X )

NOTES:

1. SUGGESTED SOURCE OF SUPPLY:

NIELSON / SESSIONS

P.O. BOX 568

770 WETHERSFIELD AVE

HARTFORD, CT 06101

P/N H945-400

FSCM NO: 98003

2. FINISH: APPLY PROTECTIVE COATING IAW MIL-C-5541,

CLASS 1A, CLEAR.

3. “IDENTIFICATION OF THE SUGGESTED SOURCE(S) OF

SUPPLY HEREON IS NOT TO BE CONSTRUED AS A

GUARANTEE OF PRESENT OR CONTINUED AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM(S).”

4. DELETED.

5. FINISH: ANODIZED IAW MIL-A-8625, TYPE 2, CLASS 1.

HOLES MAY APPEAR DUE TO VENDORS

MANUFACTURING PROCEDURES. THEY ARE NOT A

FUNCTIONAL REQUIREMENT FOR THIS PART.

7. DELETED.

8. FINISH: ANODIZED IAW MIL-A-8625, TYPE II, CLASS 2,

DYED OLIVE DRAB.

9. FINISH: HARD ANODIC COATING, MIL-A-8625, TYPE III,

CLASS 2, DYED BLACK.

1-020-06509 P021-0528-04 ALUMINUM SEE NOTE #9

1-020-00869 P021-0528-03 ALUMINUM SEE NOTE#8

P021-0528-02 ALUMINUM SEE NOTE #5

1-020-25590 P021-0528-01 ALUMINUM SEE NOTE #2

COMPUTER P.N PART NUMBER MATERIAL FINISH

l

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE

DISTRIBUTION IS UNLIMITED

Richard Averill

2007.08.1 5 09:43:20

PROJ. NO. SHEET

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

D 11214

REF:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

8 7 6 5 4 3 2 1

12345678

D D

C

B

AA

B

C

DW

G NO

SH

REV

1 OF

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

HARDIGG INDUSTRIES, INC.

South Deerfield, Massachusetts 01373 USA

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

GASKET, PL, BUP, NPRN.

P021-0529

P021-05 29

E

E

P21 1

OF

1/1

.03

S. BARRON

N. BARSTOW G. DANIELS

N00019-82-C-3223

HARDIGG INDUSTRIES

N00019-82-C-3223

A 4830 WAS "B" SIZE DWG. RLC

85-01-23

GD

85-01-23

B 6094

NOTE 1 WAS "MAT'L-NEOPRENE,

COLOR BLK, .03 THK, 65

DUROMETER IA-806 B.F.

GOODRICH OR EQUIV."

BKB

85-09-06

DANIELS

85-09-17

C 6882 ADDED CONTRACT NO. DLW

87-05-26

EJD

87-06-05

D 23860 REDRAWN WITH CHANGE

UPDATED TO LEVEL 3 FORMAT.

JAVO

99-06-29

BILL B

99-08-19

REDRAWN WITHOUT CHANGE

PER ES410

C. HUMPHREY

00-06-21

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED

THIRD ANGLE PROJECTION

1-090-20500FILENAME: P021-0529RevD.dft

N/A

82-06-3082-06-29

81-11-24

1) IN MATERIAL NOTE; D2000 WAS D1418, AND

TEMP RESISTANCE WAS -80 DEG F TO +180 DEG

F.

035804E NANCY SCANLON

06MAR20

TED LYNDS

00JUL17

R .754X

O .126X THRU

1.50

3.00

.94

4.88

3.44

.59

2.25

NOTES:

1. INTERPRET DRAWING IAW MIL-STD-100 & ASME Y14.100M.

2. MATERIAL: .03 THK EPDM RUBBER, IAW ASTM D2000

CLASS 1, GRADE 70, 65 TO 75 DUROMETER, SHORE A.

TEMP. RESISTANCE: -50°F TO +225°F, COLOR BLACK.

3. FOR SPARE PARTS PROVISIONS ONLY:

MARK IN ACCORDANCE WITH MIL-STD-130.

MFR. CAGE-PART NO.

11214-P021-0529

E1

Theodor e Lynds

Digitally signed by Theodore Lynds DN: cn=Theodore Lynds, c=US, o=Hardigg Industries, ou=Container Design Group, email=ted.

lynds@hardigg.com Reason: I am approving this document Date: 2006.03.20 14:02:41 -05'00'

B

A

D

B

A

D

C

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

REF:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

HARDIGG INDUSTRIES, INC.

South Deerfield, Massachusetts 01373 USA

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

N00383-81-C-0761

GASKET, PL, BUP, EPDM.

COMPUTER NO.:1-090-20430

P021-0530

P021-0530

E

E

P21 1

1/1

.03

S.BARRON 81-11-24

G. DANIELS 81-12-04

N. BARSTOW 81-11-24

N00019-82-C-3223

A 4831 WAS "B" SIZE DWG. RLC

85-01-23

GD

85-01-23

B 6094

NOTE 1 WAS "MAT'L-NEOPRENE,

COLOR BLK, .03 THK, 65

DUROMETER (A-806 B.F.

GOODRICH) OR EQUIV."

BKB

85-09-06

DANIELS

85-09-16

C 6881 ADDED CONTRACT NO. DLW

87-05-26

EJD

87-06-05

D 23861 REDRAWN WITH CHANGE.

UPDATED LEVEL 3 FORMAT.

JAVO

99-06-28

BILL B

99-08-19

REDRAWN WITHOUT CHANGE

PER ES410.

C. HUMPHREY

00-06-21

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED

THIRD ANGLE PROJECTION

1-090-20430

N/A

N/A

N. BARSTOW 81-12-16

1) IN MATERIAL NOTE; D2000 WAS D1418, AND

TEMP RESISTANCE WAS -80 DEG F TO +180 DEG

F.

035805E NANCY SCANLON

06MAR20

TED LYNDS

00JUL17

.88

1.78

3.56

1.50 1.50.34

R .254X

O .123X THRU

NOTES:

1. INTERPRET DRAWING IAW MIL-STD-100 & ASME

Y14.100M.

2. MATERIAL: .03 THK EPDM RUBBER, IAW ASTM D2000

CLASS 1, GRADE 70, 65 TO 75 DUROMETER, SHORE A,

TEMPERATURE RESISTANCE: -50°F TO +225°F, COLOR

BLACK.

3. FOR SPARE PARTS PROVISIONS ONLY: MARK IN

ACCORDANCE WITH MIL-STD-130.

11214-P021-0530

MFR CAGE-PART NO.

E1

Theodor e Lynds

Digitally signed by Theodore Lynds DN: cn=Theodore Lynds, c=US, o=Hardigg Industries, ou=Container Design Group, email=ted.lynds@hardigg.com Reason: I am approving this document Date: 2006.03.20 14:03:17 -05'00'

B

A

D

B

A

D

C

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

HARDIGG

STANDARD PART

PRV ASSEMBLY, +/- .25 PSIG

P021-1522

P021-1522

P21-1522 1

P021-152 2/1

07-08-14DAVE BARNES 07-08-14

NOTES:

1. THE AUTOMATIC TWO-WAY PRESSURE RELIEF VALVE

WITH MANUAL RELEASE MUST CONFORM TO SAE AS27166

THE RELEIF VALVE SHALL HAVE A CRACKING PRESSURE OF

.0.25 PSIG AND A MINIMUM SEALING PRESSURE OF 0.1 PSIG.

2. APPROVED SOURCES OF SUPPLY

AGM CONTAINER CONTROLS, INC.

PO BOX 40020 NINTH STREET NORTH

TUSCON, AZ 85717-1384

CAGE NO: 08992

PART NUMBERS:

TA333-025C-025C-R

OR

TA330-025C-025C-R

3. CORROSION RESISTANT MATERIAL MUST BE USED

4. ONLY THE ITEMS DESCRIBED ON THIS DRAWING WHEN

PROCURED FROM THE SUPPLIER LIST HEREIN IS APPROVED FOR USE

IN THE APPLICATION SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL NOT BE

USED WITHOUT PRIOR APPROVAL BY PROCURING ACTIVITY.

5. IDENTIFICATION OF THE APPROVED SOURCE(S) HEREON IS NOT TO BE

CONSTRUED AS A GUARANTEE OF PRESENT OR CONTINUED AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM DESCRIBED ON THIS DRAWING.

1.59

1.38 1.05

TA 330 VALVE HAS

PROJECTING MANUAL

RELIEF BUTTON

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE

DISTRIBUTION IS UNLIMITED

Richard Averill

Reason: Checked Date: 2007.08.14 15:13:08 -04'00'

Richard Averill Dwg Approval

2007.08.14 15:13:28

B

A

D

B

A

D

C

REVISION HISTORY

ZONE REV DESCRIPTION BY/DATE APPROVED/DATEE.C.O.

SIZE CAGE CODE DWG NO. REV

TITLE

PROJ. NO. SHEET

This drawing and all copies and the design and data shown are the property of HARDIGG INDUSTRIES , INC. So. Deerfield, MA U.S.A. and include proprietary information. The borrower by receipt or retention of the drawing agrees that, except as expressly authorized in writing by HARDIGG INDUSTRIES, INC. it will (1) not use the drawing or any copy of the design or data shown (2) not reproduce, copy, excerpt, exhibit or distribute the drawing or any copy for use by others and (3) upon demand return the drawing, all copies and all material copies therefrom.

CHKD. APVD.

ENGR. DR.

TOLERANCE

NEXT ASSY. SCALE

C 11214

CUST:

UNIT:

CONTRACT NO.

.XX .XXX ANGLE

1 OF

UNLESS OTHERWISE

SPECIFIED

DATE DATE

DATE DATE

DWG NO SH REV DWG NO SH REV

COMPUTER CONTROLLED DOCUMENT

MANUAL CHANGES NOT ALLOWED

HARDIGG® INDUSTRIES, INC.

South Deerfield, Massachusetts

01373 USA

dft Tem plate Rev 30M

AR06

WSHR, S-BUP, SSP, 3/16

1-030-39190

P21-0882-01

P21-0882-01

G

G

P21 1

2/1

K. CHASE 93-02-15

REVISED & REDRAW IN SOLID EDGE. CHANGED

NOTE 3 WAS & QQ-P-35

024588E SPRAGUE

99NOV24

NOTE 2 CHANGED SPECIFICATION FROM

"ASTM-66" TO "ASTM A666" REF ECP7013-048

032971F K. CHASE

06SEP05

TED LYNDS

00JAN06

F33700-81-C-0044

.03 .004

NOTE 2 WAS "IAW ASTM-A666"036531G MARC SERRA

06SEP05

T.LYNDS

04AUG30

NOTES:

1. INTERPRET DRAWING IAW DOD-STD-100 & ASME Y14.100 M

2. MAT'L: SST 304 IAW ASTM-A240 OR ASTM-A666.

3. FINISH: PASSIVATED IAW SAE-AMS-QQ-P-35

4. DIMENISIONS TO RADII ARE TO THEORETICAL PLANE INTERSECTIONS.

5. FOR SPARE PARTS PROVISIONING ONLY: MARK IN ACCORDANCE WITH

MIL-STD-130, BAG AND TAG.

MFR CAGE-PART NUMBER

I.E. 11214-P21-882-1

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED

THIRD ANGLE PROJECTION

O 0.370 ±.005

O 0.192 +.004

-.000 THRU

0.062 0.043

2:1

Norm Barstow

Digitally signed by Norm Barstow DN: cn=Norm Barstow, c=US, o=Hardigg Cases, ou=Design group, email=NormB@hardigg.com Date: 2006.09.06 11:09:41

Averill

2007.08.

11:28:54

Averill

2007.08.

11:59:18

Richard Averill

2007.08.15 10:45:37

4_1730AS222_30003_NULL_B_0001_B_NULL_0001_29_U_N_N_N_N_N_A