Special Packaging Instructions -F01-279-4724.pdf

PDF 389 KB Posted

Attached to
Head Up Display (HUD)
Solicitation number
SPRHA4-27-R-0970
Issued by

About this file

This is a Special Packaging Instruction (SPI) document for a monitor head-up display item designated for military preservation and international shipment. The document specifies detailed packaging requirements for Part or Drawing Number 46431110-30, National Stock Number 1270-01-514-2683 WF, under Military Preservation IAW MIL-STD-2073. The item must be packaged in accordance with two levels of protection: Level A (ASTM D6251, Type A, Class III) and Level B (ASTM D5118, RSC). Level A packaging requires a gross volume of 14.082 cubic feet, weight of 150 lbs, and dimensions of 33" L x 23 3/4" W x 21 1/2" D, while Level B packaging requires 9.378 cubic feet, 77 lbs, and dimensions of 32 1/4" L x 23" W x 20 1/2" D. The item dimensions are 22 3/4" L x 13 1/2" W x 9 3/4" D with a weight of 24 lbs.

Specific packaging materials and components are mandated, including ASTM D5486 Type I tape (3 pieces as required), humidity indicator per MS2003 (three spot), desiccant units per MIL-D-3464 Type I, wrap per A-A-3174, cushioning materials per MIL-PRF-26514, barrier container per ASTM D1178 RSC, and skid per ASTM D6199. The document emphasizes compliance with International Standards for Phytosanitary Measures (ISPM No. 15) for all wood packaging materials, requiring debarked wood heat-treated to 56 degrees Centigrade (133 degrees Fahrenheit) for 30 minutes with certification by an accredited agency. Special markings include the SPI number F01-279-4724 on the identification side of containers, and containers must remain reusable and not for outside storage. Distribution is authorized to DOD and U.S. DOD contractors only for administrative or operational use as of February 7, 2018, with requests referred to 406 SCMS/GULAA at Hill AFB, Utah.

View the file

Other files

File Type Posted
First Article Test Report.pdf PDF
SPRHA427R0970.pdf PDF
Counterfeit Prevention Plan.pdf PDF
Engineering Data List.pdf PDF
Manufacturing Qualification Requirements.pdf PDF
_UnmarkedEngData2022.pdf PDF
First Article Test Plan.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 07 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

CAUTION NOTICES

NOTES

1. COMBINING THICKNESS MAY BE USED TO OBTAIN REQUIRED THICKNESS OF CUSHION, REF.-8.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

File details come from the government source that posted it. Updated .