EDR.pdf
PDF 92 KB Posted
- Attached to
- F-16 Actuator, Electro-Me
- Solicitation number
- SPRHA4-26-R-0604
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements form (HILL AFB FORM 462) prepared for the manufacture of an Asymmetry Brake-Leading Edge Drive System. The document was prepared by William Garcia from the 416 SCMS/GUEAA office at Hill Air Force Base on 6 April 2026. The part is identified by part number 16VM003006-4 and National Stock Number 1680-01-168-9396WF.
The form establishes manufacturing instructions and engineering control requirements for the specified component. Key requirements include: (1) manufacturers must comply with specifications and standards referenced in the documentation, with military specifications not provided in the bid set; (2) only sources and materials listed on standards, specifications, and drawings are authorized for use, and any substitutions require prior written approval from the cognizant engineering activity (416 SCMS); and (3) no deviations from specifications identified in control drawings are permitted without prior approval from 416 SCMS. This document serves as an attachment to establish the technical and contractual framework governing the manufacture of this aerospace component.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426R0604_______0001.pdf | ||
| SOW.pdf | ||
| MQR.pdf | ||
| EDL.pdf | ||
| SPRHA426R0604.pdf | ||
| Unmarked Eng Data 2022.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ASYMMETRY BRAKE-LEADING EDGE DRIVE SYSTEM
2. PART NUMBER:
16VM003006-4
3. NATIONAL STOCK NUMBER:
1680-01-168-9396WF
PREPARED BY:
WILLIAM GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
6 APRIL 2026
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY (416 SCMS).
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY (416 SCMS).
File details come from the government source that posted it. Updated .