Engineering Data Requirements.pdf

PDF 78 KB Posted

Attached to
TRANSFER UNIT
Solicitation number
SPRHA424Q0429
Issued by

About this file

Written by GovTribe AI ·

This document contains engineering data requirements and specifications for the manufacture of a transfer unit part. Key details include:

  • The part number is D7621000001-01 with National Stock Number 7025-01-616-5061WF. Specifications and standards will be used in lieu of data, and substitutions require prior approval from the cognizant engineering activity. Deviations from control drawings also require prior approval.

  • Unique identification is required per MIL-STD-130 on human and machine readable labels, including cage code, part number, and serial number. Label material and existing label data must be maintained.

  • A counterfeit prevention plan is required per DoD-adopted SAE 5553 and DI-MISC-81832, applying policies and procedures to electronic parts to prevent counterfeits entering the DoD supply chain.

The related federal contract opportunity is for one transfer unit with National Stock Number 7025-01-616-5061, restricted to qualified source GE Aviation Systems LLC CAGE 35351, issued by the Defense Logistics Agency Aviation. Product Service Code 7K20 replaces the obsolete code 7025 in some but not all systems.

View the file

Other files

File Type Posted
Packaging Statement of Work.pdf PDF
Unmarked Eng Data 2022.pdf PDF
SPRHA424Q0429 CUI SSI.pdf PDF
Engineering Data List.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

TRANSFER UNIT, ADVAN

2. PART NUMBER:

D7621000001-01

3. NATIONAL STOCK NUMBER:

7025-01-616-5061WF

PREPARED BY:

JUSTIN ALLRED

OFFICE SYMBOL:

416 SCMS/GUMA

DATE:

20221205

HILL AFB FORM 462 Page 1 of 1

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY

SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT

PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.

7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:

A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:

1. CAGE (17V)

2. P/N (1P)

3. SERIAL NUMBER (1S)

B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO

INCLUDE:

1. CAGE (17V)

2. P/N (1P)

3. SERIAL NUMBER (1S)

C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE

REPLACED.

D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING

LABEL.

E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.

11. COUNTERFIT PREVENTION PLAN (CPP). Contractors that supply electronic parts or systems that contain electronic parts shall establish policies and procedures to avoid, detect, mitigate and disposition counterfeit electronic parts to prevent such parts from entering the USAF/DoD supply chain. These policies and procedures shall be documented in a CPP for submission and approval in accordance with Data Item Description (DID) DI-MISC-81832 and accomplished for all specified contract items. DI-MISC-81832 is applicable to Parts, Material and Processes

Selection (PMPS) associated with delivery of systems and assemblies to the USAF and DoD. The requirements established by DI-MISC-81832 also apply to electronics components procured in sustainment of such systems and assemblies. The requirements of the recently DoD-adopted SAE 5553, Aerospace Standard, Counterfeit Electronics

Parts; Avoidance, Detection, Mitigation, and Disposition shall also apply.

File details come from the government source that posted it. Updated .