SPI - AK10229748.pdf
PDF 3 MB Posted
- Attached to
- Transmission Control Assembly
- Solicitation number
- SPRDL127RA014
About this file
This is a DD Form 2169, Special Packaging Instruction, dated June 1997, containing detailed packaging and preservation requirements for a Control Assembly, Transmission component.
The document specifies packaging procedures for part number 11649939 (CAGE 19207), with National Stock Number 2520-01-022-9748, revision E, dated 5 SEP 2024. The item weighs 63.0 pounds and measures 15.5 x 12.3 x 4.3 inches, with a unit pack weight of 66.2 pounds and dimensions of 20.0 x 16.8 x 9.3 inches. Preservation shall be accomplished using MIL-STD-2073-1, Method 42, requiring internal cleaning and drying per MIL-STD-129 standards. The component must be preserved using operational fluid, capped with NAS 847 plugs, wrapped in MIL-PRF-121 Type I material, and cushioned with PPP-C-1797 Type I cushioning. Packing is specified at two levels: Level A requires wood-cleated panelboard shipping boxes conforming to ASTM-D 6251 Type III Class 2 or nailed wood boxes per ASTM-D 6880 Class 2; Level B requires weather-resistant fiberboard boxes conforming to ASTM-D 5118 or triplewall corrugated fiberboard boxes per ASTM-D 5168 Class 2. When total shipment quantity to a single destination exceeds 125 pounds, exterior packs without skids must be palletized in accordance with MIL-STD-147. The form includes detailed step-by-step procedures (Steps 1-H) for preservation, wrapping, cushioning, bagging, and container closure.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPRDL127RA014.pdf | ||
| Solicitation Amendment SPRDL127RA0140001 SF 30.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
XTC
XFA
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
11649939 (19207) CONTROL ASSEMBLY, TRANSMISSION 19207 AK10229748
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2520-01-022-9748 5 SEP 2024 E
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
001 NONE 66.2 1.808 20.0 X 16.8 X 9.3
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 42 1-B PRESERVATIVE: OPERATIONAL FLUID
13. CLEANING 2-C CAPS/PLUGS: NAS 847
MIL-STD-2073-1 3-D WRAP: MIL-PRF-121, TY. I, SIZE: 46 X 36
14. DRYING 4-E CUSHIONING: PPP-C-1797, TY. I, SIZE: 46 X 36 X 1/4
MIL-STD-2073-1 CONTAINER: ASTM-D5118, TY. CF, CL. DOM, VAR. SW,
15. PACKING
a. LEVEL A
MIL-STD-2073-1 AND NOTE I
b. LEVEL B
MIL-STD-2073-1 AND NOTE I
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
• WEIGHT, CUBE AND ALL DIMENSIONS ARE ESTIMATED BASED ON REV C OF DRAWING 11649939.
A. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-1 AND THE
APPLICABLE CONTAINER SPECIFICATION.
B. SLUSH AND FLUSH INTERNALLY WITH OPERATIONAL FLUID.
C. INSTALL CAPS/PLUGS OF APPROPRIATE SIZE AS REQUIRED.
D. WRAP ITEM AND SECURE USING TAPE.
E. WRAP ITEM AND SECURE USING TAPE.
F. LINE CONTAINER FROM STEP 5 WITH 1-1/2 INCH THICK, A-A-59136, CL 1, GR A, TY I, QTY.: 6, SIZE: AS REQUIRED. PLACE PREPARED PART AT CENTER OF CUSHIONING AND CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER
SPECIFICATION.
G. PLACE CONTAINER FROM NOTE E IN BAG AND CLOSE BY HEAT SEALING.
H. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION.
I. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2, CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED
IN THE CONTAINER SPECIFICATION.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS
WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
Item Dimensions (IN) 15.5 X 12.3 X 4.3 Item Weight (LB) 63.0.
GR. 275, ST. RSC, SIZE: 19-1/4 X 16 X 8 IN.
A/R A/R
CUSHIONING: SEE NOTE
BAG: MIL-DTL-117, TY. II, CL. E, ST. 1, SIZE: A/R
CONTAINER: ASTM-D5118, TY. CF, CL. WR, GR. V3c, 66-F 7-G 1 8-H 1
ST. RSC, SIZE: 19-3/4 X 16-1/2 X 8-3/4 IN.
5 1
File details come from the government source that posted it. Updated .