SPRDL126R0079 SPI - AK13469233.pdf
PDF 376 KB Posted
- Attached to
- Track Shoe, Vehicular
- Solicitation number
- SPRDL1-26-R-0079
About this file
This is a DD Form 2169, Special Packaging Instruction, for a Track T-154 component (Part Number 12268550-1, CAGE Code 19207, National Stock Number 2530-01-346-9233). The form was last revised on October 16, 2023 (Revision F) and provides detailed packaging, preservation, and marking requirements for the manufacture and shipment of this military item.
The Track T-154 shall be assembled into eight shoe sections with an estimated unit pack weight of 500 pounds and cubic measurement of 6.576 cubic feet per package (50.5 x 25.0 x 9.0 inches). Preservation requirements include MIL-STD-2073-1E Method 20 with MIL-PRF-16173 Grade 1 preservative applied to exposed metal surfaces via dipping, spraying, or brushing, with blocking and strapping per referenced standards. Packing shall consist of four track shoe sections (32 shoe assemblies total) bundled as a single shipping container using lumber blocking (two 2x6x48 and two 2x6x7 pieces) and strapping (two 108-inch and two 156-inch lengths of ASTM D3953 Type 1 strapping, 1-1/4 inches wide by .031 inches thick). All preservation and packing must be inspected per MIL-STD-2073-1E, and marking shall comply with MIL-STD-129 and MIL-PRF-11891, with contract data marking and bar coding required on the shipping container exterior.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126R0079 TDP - Track Shoe EH6C0272EH.zip | ZIP file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
XJO
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12268550-1 (19207) TRACK T-154 19207 AK13469233
4. NATIONAL STOCK NUMBER 6. REVISION
2530-01-346-9233
5. DATE OF DRAWING
10-16-2023 F
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
SEE NOTE B & D NONE EST. 500.0 EST. 6.576 EST. 50.5 x 25.0 x 9.0
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1E, METHOD 20 1-B A/R PRESERVATIVE: MIL-PRF-16173, GRADE 1
13. CLEANING 2 A/R BLOCKING: SEE SHEET 2
MIL-STD-2073-1E 3 A/R STRAPPING: SEE SHEET 2
14. DRYING
MIL-STD-2073-1E
15. PACKING
A. LEVEL A
MIL-STD-2073-1E AND NOTE D
B. LEVEL B
NOTE APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE C
17. NOTES / DRAWING
A. PRESERVATION AND PACKING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1E.
B. ASSEMBLE SHOES INTO (8) SHOE SECTIONS. PRESERVATIVE SHALL BE APPLIED TO EXPOSED METAL
SURFACES. PRESERVATIVE ON RUBBER COMPONENTS IS PERMISSABLE. APPLICATION OF
PRESERVATIVE MAY BE ACCOMPLIISHED BY DIPPING, SPRAYING OR BRUSHING.
C. EACH TRACK SHOE ASSEMBLY SHALL BE MARKED PER MIL-PRF-11891. NO OTHER UNIT PACK MARKING IS REQUIRED. EXTERIOR IDENTIFICATION, CONTRACT DATA MARKING AND BAR CODING IS REQUIRED ON
THE SHIPPING CONTAINER, SEE NOTE D AND MIL-STD-129.
D. PACKING SHALL CONSIST OF FOUR (4) TRACK SHOE SECTIONS (32 SHOE ASSEMBILES) AND BUNDLED IN ACCORDANCE WITH THE REQUIERMENTS ON SHEET 2. BUNDLED LOAD SHALL SERVE AS THE SHIPPING
CONTAINER.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
XJO
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12268550-1 (19207) TRACK T-154 19207 AK13469233
4. NATIONAL STOCK NUMBER 6. REVISION
2530-01-346-9233
5. DATE OF DRAWING
10-16-2023 F
17. NOTES / DRAWING
NOTES:
1. LUMBER, NUMBER 2 COMMON OR BETTER.
2. STRAPPING: ASTM D3953, TYPE 1, FINISH B,
SIZE 1-1/4 WIDE X .031 THICK.
3. NAILING OF BLOCKING PER MIL-STD-1186.
4. USE EDGE PROTECTORS AT SHARP CONTACT
AREAS.
5. POSITION STRAPPING THROUGH THE FOUR
TRACK SECTIONS AND ENCIRCLE BUNDLE.
6. STRAPPING SHALL ENCIRCLE OUTSIDE
PERIMITER OF BUNDLED TRACK SECTIONS.
ITEM DESCRIPTION QTY. NOTE
1. 2 X 6 NOM X 48 2 1
2. 2 X 6 NOM X 7 2 1
3. 108 INCHES LONG 2 2
4. 156 INCHES LONG 2 2
File details come from the government source that posted it. Updated .