AK16236680.pdf
PDF 225 KB Posted
- Attached to
- Cylinder Assembly
- Solicitation number
- SPRDL1-26-Q-0092
About this file
This is a DD Form 2169 (Special Packaging Instruction) dated February 5, 2013, for a Cylinder Assembly, Sideshifter (Part No. 101GR0012, CAGE 0LVS7, National Stock No. 3040-01-623-6680). The document specifies detailed packaging and preservation requirements for this component, with a unit pack weight of 102.5 pounds and dimensions of 51.3 x 10.3 x 9.3 inches.
The packaging instructions mandate military preservation using MIL-STD-2073-1D Method 20, which includes cleaning per MIL-STD-2073-1D, application of MIL-PRF-10924 preservative to all unpainted metallic surfaces, and drying per MIL-STD-2073-1D. The cylinder assembly must be fully retracted prior to packaging. All interior openings must be sealed with NAS-847 caps/plugs, and the item must be wrapped entirely with MIL-PRF-121 Type II paper (36 x 58 inches) secured with ASTM-D6123 tape. Blocking and bracing shall conform to ASTM-D6199, Class 3, with specific lumber requirements detailed for seven blocking components (Items A through G). The shipping container is an ASTM-D6251 Type III, Class 2, Steel I container modified with 2 x 4 skids, measuring 48-1/4 x 8-3/4 x 7 inches. Marking shall comply with MIL-STD-129. The form includes visual diagrams showing blocking locations and the proper orientation of the cylinder within the container, along with a photograph demonstrating the final packaged configuration.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126Q0092.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
101GR0012 (0LVS7) CYLINDER ASSEMBLY, SIDESHIFTER 19207 AK16236680
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-623-6680 2/5/2013 -
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 102.5 2.844 51.3 X 10.3 X 9.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 20
13. CLEANING 1-B A/R ITEM PREPARATION
MIL-STD-2073-1D 2-C A/R PRESERVATIVE: MIL-PRF-10924
14. DRYING 3-D A/R CAPS/PLUGS: NAS-847
MIL-STD-2073-1D 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE: 36 X 58
15. PACKING
5-F 10 BLOCKING/BRACING: ASTM-D6199, CL 3
6-G 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST I, MODIFIED
a. LEVEL A SIZE: 48-1/4 X 8-3/4 X 7
MIL-STD-2073-1D & NOTE H
b. LEVEL B
NONE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. ENSURE CYLINDER ASSEMBLY IS FULLY RETRACTED PRIOR TO PACKAGING.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
D. SEAL ALL OPENINGS TO ITEMS INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH TAPE ASTM-D6123.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE BELOW AND PAGE 2 FOR SIZES AND ORIENTATION.
G. CONTAINER MODIFIED TO INCLUDE 2 X 4 SKIDS PLACED IN ACCORDANCE WITH ASTM D6251. CLOSE
CONTAINER IN ACCORDANCE WITH ASTM D6251.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
ITEM SIZE QTY REFERENCE
A 4 X 4 X 9-1/2 1 ASTM-D6199, CL 3
B 4 X 4 X 29 1 ASTM-D6199, CL 3
C 2 X 4 X 7-1/2 1 ASTM-D6199, CL 3
D 2 X 4 X 26-3/4 1 ASTM-D6199, CL 3
E 2 X 4 X 8-3/4 2 ASTM-D6199, CL 3
F 1 X 4 X 8-3/4 2 ASTM-D6199, CL 3
G 8-3/4 X 3-1/2 X 3/8” THICKNESS PLYWOOD 1 ASTM-D6199, CL 3
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
101GR0012 (0LVS7) CYLINDER ASSEMBLY, 19207 AK16236680
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-623-6680 2/5/2013 -
17. NOTES/DRAWING
BLOCKING LOCATIONS
ORIENTATION OF CYLINDER IN CONTAINER
NOTE: WRAP REMOVED FOR CLARITY
A
F
EB
G
F
E
D
C
File details come from the government source that posted it. Updated .