AK16621588.pdf
PDF 225 KB Posted
- Attached to
- Cylinder Assembly, Actuating, Linear
- Solicitation number
- SPRDL1-26-Q-0075
About this file
This is a Special Packaging Instruction (DD Form 2169) document for a Cylinder Assembly, Actuating, Linear with National Stock Number 3040-01-662-1588, CAGE Code 19207, and SPI Number AK16621588. The specification was issued on 12/12/2023 and outlines detailed preservation, packing, and marking requirements for a single unit weighing 615.0 pounds with dimensions of 56.0 x 16.3 x 17.3 inches.
The packaging process requires military preservation per MIL-STD-2073-1, Method 20, including cleaning and drying per MIL-STD-2073-1, application of MIL-PRF-10924 preservative to all zerk fittings and MIL-PRF-32033 preservative to external bare ferrous surfaces, sealing zerk fittings with NAS 847 caps/plugs, and wrapping the item in MIL-PRF-121 Type II material measuring 36" x 66". Level A packing applies with Level B not applicable. The item must be placed in an ASTM-D6880 Class 2, Style 2 wooden container measuring 53" x 14-3/4" x 12-1/4" and secured with 2-inch wood screws per FF-S-111 and ASTM-D6880. The container requires 32 blocking/bracing components per ASTM-D6199 constructed from specified lumber sizes secured with ASTM-F1667 nails/staples. Container markings must include "REUSABLE CONTAINER, DO NOT DESTROY" and "REMOVE (LAG BOLTS OR SCREWS) TO OPEN CONTAINER" in minimum 1/2-inch-high black letters, in addition to MIL-STD-129 markings.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL1-26-Q-0075.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages
17. NOTES/ DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. APPLY PRESERVATIVE TO ALL ZERK (GREASE) FITTINGS.
C. SEAL ZERK (GREASE) FITTINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
D. APPLY PRESERVATIVE TO ALL EXTERNAL BARE FERROUS SURFACES.
E. WRAP ITEM AND SECURE WITH TAPE ASTM-D6123.
F. SEE PAGES 2 THROUGH 4.
G. CLOSURE: CLOSE CONTAINER USING 2-INCH-LONG WOOD SCREWS IAW FF-S-111, FASTENING THROUGH END AND
SIDE PANELS INTO SILL ATTACHED TO TOP PANEL IAW ASTM-D6880.
H. UNIT CONTAINER IS THE SHIPPING CONTAINER.
I. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM 1/2-INCH-HIGH BLACK LETTERS “REUSABLE CONTAINER, DO NOT DESTROY”. IN ADDITION, THE TOP SHALL BE MARKED “REMOVE (LAG BOLTS OR SCREWS) TO OPEN CONTAINER”, USING MINIMUM 1/2-INCH-HIGH BLACK
LETTERS.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188 -RA
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
356-2219 (11083) CYLINDER ASSEMBLY,ACTUATING,LINEAR 19207 AK16621588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-662-1588 12/12/2023
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH 000 615.0 9.139 56.0 X 16.3 X 17.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-10924
MIL-STD-2073-1
14. DRYING 2-C A/R CAPS/PLUGS: NAS 847
MIL-STD-2073-1
15. PACKING 3-D A/R PRESERVATIVE: MIL-PRF-32033
a. LEVEL A 4-E 1 WRAP: MIL-PRF-121, TYPE II, SIZE: 36” X 66”
MIL-STD-2073-1 AND NOTE H
b. LEVEL B 5-F 32 BLOCKING/BRACING: ASTM-D6199
NOT APPLICABLE
16. MARKING 6-G 1 CONTAINER: ASTM-D6880, CL 2, ST 2,
MIL-STD-129 AND NOTE I SIZE: 53” X 14-3/4” X 12-1/4”
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
356-2219 (11083) CYLINDER ASSEMBLY,ACTUATING,LINEAR 19207 AK16621588
4. NATIONAL STOCK NO.
3040-01-662-1588
5. DATE
12/12/2023
6. REVISION
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages
CONTAINER WITH BLOCKING (TOP VIEW)
NOTES: SECURE BLOCKING ITEM “A” TO THE INTERIOR OF THE UNIT CONTAINER USING
NAILS/STAPLES CONFORMING ASTM-F1667.
BLOCKING ITEMS “A” ARE LOCATED IN THE CENTER OF THE END PANELS (2-3/4” FROM EITHER
SIDE PANEL).
ALL LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED
ITEM SIZE QTY ADDITIONAL NOTES:
A 2 X 10 X 12-1/4 2 SEE ABOVE
B 2 X 4 X 12-1/4 8 SEE PAGE 3
C 2 X 4 X 8-3/4 8 SEE PAGE 4
D 2 X 4 X 14-3/4 4 SEE PAGE 4
E 1 X 4 X 14-3/4 4 SEE PAGE 4
F 2 X 2 X 11-3/4 2 SEE PAGE 3
G 2 X 2 X 10 2 SEE PAGE 3
H 2 X 2 X 9-1/2 2 SEE PAGE 3
I 2 X 2 X 8-1/2 2 SEE PAGE 3
A
A
D
E
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
356-2219 (11083) CYLINDER ASSEMBLY,ACTUATING,LINEAR 19207 AK16621588
4. NATIONAL STOCK NO.
3040-01-662-1588
5. DATE
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages
BACK SIDE PANEL WITH BLOCKING (INSIDE VIEW)
FRONT SIDE PANEL WITH BLOCKING (INSIDE VIEW)
TOP PANEL WITH CLEATING (BOTTOM VIEW)
NOTES: SECURE BLOCKING ITEMS “B,F,G,H & I” TO THE UNIT CONTAINER FROM THE EXTERIOR
USING NAILS/STAPLES CONFORMING TO ASTM-F1667.
B
B
G
H
F
I F
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
356-2219 (11083) CYLINDER ASSEMBLY,ACTUATING,LINEAR 19207 AK16621588
4. NATIONAL STOCK NO.
3040-01-662-1588
5. DATE
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages
CONSTRUCT
BLOCKING ASSEMBLY
(BELOW) USING
NAILS/STAPLES
CONFORMING TO
ASTM-F1667.
E
D
C
C
D
E
File details come from the government source that posted it. Updated .