Special Packaging Instructions__AK11931740_C.pdf
PDF 128 KB Posted
- Attached to
- Cylinder Assembly, Actuating, Line
- Solicitation number
- SPRDL1-26-P-0158
About this file
This is a DD Form 2169, Special Packaging Instruction, for a Lift Cylinder Assembly (Part Number 6-372-002257, National Stock Number 3040-01-193-1740, CAGE 12361). The form was last revised on 22 September 2022 (Revision C) and serves as packaging and preservation specifications for this component.
The packaging requirements specify preservation using MIL-STD-2073-1 Method 20, with cylinder rods fully retracted and filled with manufacturer-recommended lubricant (MIL-PRF-16173, Grade 4). Interior openings must be sealed with NAS847 caps/plugs or SAE-AMS-T22085 tape, and a moisture barrier (MIL-PRF-121, Type I) must be applied. The unit pack weight is 200.0 pounds with dimensions of 46.2 x 14.0 x 8.5 inches (3.185 cubic feet). The shipping container is an ASTM-D6880 Class 2, Style 4 corrugated box sized at 43-1/4 x 7 x 9-1/2 inches. Blocking and bracing must conform to MIL-STD-1186 using specified materials (2" x 4" x 7" wood, 5/8" x 3-1/2" x 7" plywood, and 2" x 3" x 7" nominal blocks) secured with nails and staples per ASTM F1667. Quality assurance requires inspection of preservation and packing per applicable standards, and marking must follow MIL-STD-129.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
17. NOTES/ DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE PACKING IN ACCORDANCE WITH THE APPLICABLE CONTAINER SPECIFICATION.
B. WITH CYLINDER RODS FULLY RETRACTED, FILL WITH PRESERVATIVE USING A MANUFACTURER'S
RECOMMENDED LUBRICANT.
C. SEAL OPENINGS TO THE INTERIOR WITH CAPS/PLUGS OF THE APPROPRIATE SIZE OR WITH TAPE SAE-AMS-T- 22085.
D. APPLY PRESERVATIVE TO BARE FERROUS EXTERIOR SURFACES.
E. APPLY BETWEEN POIN'l'S OF CON'l'ACT OF ITEM WITH BLOCKING OR CON'l'AINER.
F. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-OK
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
6-372-002257 (12361) LIFT CYLINDER ASSEMBLY 19207 AK11931740
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-193-1740 22 SEP 2022 C
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
001 NONE 200.0 3.185 46.2 X 14.0 X 8.5
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 20
13. CLEANING 1B A/R PRESERVATIVE: (SEE NOTE “B”)
MIL-STD-2073-1 2C A/R CAPS/PLUGS: NAS847
14. DRYING 3D A/R PRESERVATIVE: MIL-PRF-16173, GR. 4
MIL-STD-2073-1 4E A/R BARRIER: MIL-PRF-121, TYPE I
15. PACKING 5 A/R BLOCKING/BRACING: MIL-STD-1186 (SEE PAGE 2)
6F 1 CONTAINER: ASTM-D6880, CLASS 2, STYLE 4,
CLASS 2, STYLE A, TREATMENT A a. LEVEL A SIZE: 43-1/4 X 7 X 9-1/2 IN.
MIL-STD-2073-1 AND NOTE F
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved
OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
6-372-002257 (12361) LIFT CYLINDER ASSEMBLY 19207 AK11931740
4. NATIONAL STOCK NO.
3040-01-193-1740
5. DATE
22 SEP 2022
6. REVISION
C
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
17. NOTES/ DRAWING
File details come from the government source that posted it. Updated .