SPI_AK15249454.pdf
PDF 118 KB Posted
- Attached to
- Rack, Ammunition Stowage
- Solicitation number
- SPRDL1-25-R-0101
About this file
This Special Packaging Instruction (DD Form 2169) details packaging specifications for a military ammunition rack (NSN 2590-01-524-9454) with CAGE code 19207. The document provides comprehensive instructions for preservation, cleaning, container construction, and hardware requirements. Key packaging details include a plywood container measuring 44.4 x 34.7 x 30.8 inches, weighing 184.5 pounds, constructed with 3/8-inch plywood and 1 x 2-inch cleats. Specific packaging standards referenced include MIL-STD-2073-1D for preservation, ASTM D6251 for container specifications, and MIL-STD-1186 for blocking and bracing. Special marking instructions require labeling the container with cautionary text such as "REMOVE MOUNTING HARDWARE TO REMOVE ITEM FROM CONTAINER" and "CAUTION: LIFT BY BASE ONLY" in 1/2-inch black letters.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL125R0101-0001_signed.pdf | ||
| SPRDL125R0101.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-VS
JS
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12492068 (19207) RACK, ANNUNITION, STOWAGE 19207 AK15249454
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-524-9454 10-10-08
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 184.5 27.461 44.4 X 34.7 X 30.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1D, METHOD 10
13. CLEANING 1-C 1 CONTAINER: ASTM D6251. ST A, CL 2, TY III
MIL-STD-2073-1D SIZE: 42-1/8 X 32-3/8 X 25 ID
14. DRYING
MIL-STD-2073-1D 2-D, E BLOCKING/BRACING: MIL-STD-1186
15. PACKING
a. LEVEL A
MIL-STD-2073-1D
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE F
17. NOTES/DRAWING
A. QUALITY ASSURANCE:
1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER
SPECIFICATION.
B. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
C. CONTAINER TOP, ENDS, SIDES AND BOTTOM ARE CONSTRUCTED OF 3/8-INCH PLYWOOD WITH 1 X 2-INCH
CLEATS. BEVELED SKIDS SHOULD BE PLACED AS TO NOT INTERFERE WITH AMMUNITION RACK MOUNTING
LOCATIONS, AS SHOWN ON PAGE 4.
D. INSTALL BLOCKING/BRACING AS SHOWN ON PAGES 2 AND 3. BLOCKING AND BRACING SHALL BE
ACCOMPLISHED IN ACCORDANCE WITH MIL-STD-1186.
BLOCKING/BRACKING LUMBER SHALL CONFORM TO ASTM D6199, CLASS 3, GROUP II. BLOCKING/BRACING SHALL BE SECURED TO THE INTERIOR BOTTOM OF THE CONTAINER WITH NAILS CONFORMING TO ASTM
F1667, AS ILLUSTRATED ON PAGES 3 AND 4.
MODIFY BLOCKING (ITEM C) IN ACCORDANCE WITH FIGURE ON PAGE 2. FASTEN TOGETHER MODIFIED BLOCKING (ITEM C) WITH ONE (1) EACH BLOCKING (ITEM B) PRIOR TO INSTALLATION ON CONTAINER BASE.
SECURE WITH NAILS CONFORMING TO ASTM F1667.
E. THE AMMUNITION RACK SHALL BE SECURELY FASTENED TO THE BLOCKING WITH HARDWARE AS SHOWN ON
PAGE 4. BOLTS SHALL BE IN ACCORDANCE WITH ASME/ANSI B18.2.1. FLAT WASHERS SHALL BE IN ACCORDANCE WITH ASME/ANSI B22.1. LOCK WASHERS SHALL BE IN ACCORDANCE WITH ASME/ANSI B18.21.
NUTS SHALL BE IN ACCORDANCE WITH ASME/ANSI B18.2.2.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12492068 (19207) RACK, ANNUNITION, STOWAGE 19207 AK15249454
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-524-9454 10-10-08
17. NOTES/DRAWINGS CONTINUED
F. SPECIAL MARKING SHALL BE APPLIED AS FOLLOWS:
1. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND SIDES WITH MINIMUM 1/2-INCH HIGH BLACK LETTERS “REMOVE MOUNTING HARDWARE TO REMOVE ITEM FROM CONTAINER”. CONTAINER SIDES AND ENDS SHALL ALSO BE MARKED NEAR THE TOP WITH
MINIMUM 1/2-INCH HIGH BLACK LETTERS “CAUTION: LIFT BY BASE ONLY”.
ITEM NOMENCLATURE QTY
A BRACING (SEE BELOW) 1
B BRACING (SEE BELOW) 1
C BRACING (SEE BELOW) 1
D BRACING (SEE BELOW) 1
E NUT (3/8") 4
F LOCK WASHER (3/8") 4
G FLAT WASHER (3/8") 8
H CARRIAGE BOLT (3/8" X 4") 2
I CARRIAGE BOLT (3/8" X 6-1/2") 2
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 4 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12492068 (19207) RACK, ANNUNITION, STOWAGE 19207 AK15249454
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-524-9454 10-10-08
17. NOTES/DRAWINGS CONTINUED
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 4 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12492068 (19207) RACK, ANNUNITION, STOWAGE 19207 AK15249454
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-524-9454 10-10-08
17. NOTES/DRAWINGS CONTINUED
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 4 Pages
File details come from the government source that posted it. Updated .