SPI_AK16685049.pdf
PDF 99 KB Posted
- Attached to
- Clutch, Fan, Engine Federal contract opportunity
- Solicitation number
- SPRDL124R0030
About this file
This document contains a Special Packaging Instruction (SPI) and the associated federal contract opportunity solicitation. The SPI provides detailed packaging requirements for a Clutch, Fan, Engine part, including preservation, unit packaging, packing, and marking instructions in accordance with MIL-STD-2073-1E. The opportunity solicitation seeks offers for a five-year Indefinite Delivery Indefinite Quantity contract to supply the Clutch, Fan, Engine part to the Defense Logistics Agency Land and Maritime. Offerors are restricted to two specified manufacturers. The minimum five-year quantity is 144 units and the maximum is 500 units. Packaging must follow military standards. The close date for offers is March 25, 2024. The solicitation allows for a potential reverse auction and offerors must register for this system if an auction is held.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL124R0030.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
JO
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
4358272 (75Q65) CLUTCH,FAN,ENGINE 19207 AK16685049
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2930-01-668-5049 7/18/2018
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 86.0 2.350 17.6 X 14.6 X 15.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1E, METHOD 20
13. CLEANING 1-C A/R PRESERVATIVE: MIL-PRF-16173, GR 4
MIL-STD-2073-1E & NOTE B 2-D 1 WRAP: MIL-PRF-121, TY II, SIZE: 32 X 36
14. DRYING 3-E 3 BLOCKING/BRACING: ASTM-D6199
MIL-STD-2073-1E & NOTE B 4-F 1 CONTAINER: ASTM-D6251 TY III, CL 2, ST I, MODIFIED
15. PACKING
SIZE: 15-1/4 X 12-1/4 X 11-1/2
a. LEVEL A
MIL-STD-2073-1E & NOTE G
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT, PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1E AND
THE APPLICABLE CONTAINER SPECIFICATION.
B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING
MATERIALS.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
D. WRAP SPINDLE IN PAPER, SECURE WITH TAPE ASTM-D6123.
E. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGE 2 FOR BLOCKING SIZES AND ORIENTATION.
F. CONTAINER IS MODIFIED TO ALLOW FOR 2 X 4 SKIDS TO BE PLACED IN ACCORDANCE WITH ASTM-
D6251. CLOSE IN ACCORDANCE WITH ASTM-D6251.
G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
-BK
JO
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
4358272 (75Q65) CLUTCH,FAN,ENGINE 19207 AK16685049
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2930-01-668-5049 7/18/2018
ITEM SIZE QTY REFERENCE
A 15-1/4 X 12-1/4 X 11-1/2 CRATE 1 ASTM-D6251 TY III, CL 2, ST I
B 12 X 15 X ½ 1 A-A-55057
C 2 X 4 X 10-3/4 2 ASTM-D6199
D 32 X 36 PAPER 1 MIL-PRF-121, TY II
E 1/2 X 2” HARDWARE SET 4
HARDWARE SET CONSISTS OF:
1PC 1/2 X 2” CARRIAGE BOLT, 1PC 1/2 FLAT WASHER,
1PC 1/2 LOCK WASHER, AND 1 PC 1/2 NUT
B
E
C
ALL HOLES ARE ½” DIAMETER.
FOR CLARITY ITEM IS
SHOWN WITHOUT WRAP
AND CONTAINER IS
SHOWN WITHOUT
FRONT, LEFT & TOP
PANELS.
File details come from the government source that posted it. Updated .