AK16753301.pdf

PDF 254 KB Posted

Attached to
LLRC, XFR CASE ASSEMBLY M-ATV
Solicitation number
SPRDL124Q0131
Issued by

About this file

This document is a Special Packaging Instruction (DD Form 2169) for a Transfer Case Assembly with Container, NSN 2520-01-675-3301. The instruction details the required preservation, cleaning, drying, and packaging methods, including the use of an internal preservative, external preservative, and desiccant units. The packaging level is A. The transfer case weighs 290 lbs and the reusable container weighs 868 lbs.

The related federal contract opportunity is a Total Small Business Set-Aside solicitation (SPRDL124Q0131) for the LLRC, XFR Case Assembly M-ATV. The solicitation quantity is 2 EA with an option for 2 more. The CAGE code is 75Q65 and the Army part number is 12627772. The solicitation close date is 13 Sep 2024 at 11:59pm Eastern. The solicitation contains a provision for a reverse auction pricing technique.

View the file

Other files

File Type Posted
Conformed SPRDL124Q0131 Signed.pdf PDF
SPRDL124Q0131-0003 AMD.pdf PDF
SPRDL124Q0131-0002 AMD.pdf PDF
SPRDL124Q0131 SIGNED.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

XCL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K8931 (19207) TRANSFER CASE WITH CONTAINER ** 19207 AK16753301

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-675-3301 05/23/2024 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

001 NONE 1158.0 LBS 52.867 52.3 X 41.1 X 42.5

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 55 1-B INTERNAL PRESERVATIVE: OPERATIONAL FLUID

13. CLEANING

MIL-STD-2073-1

14. DRYING 2-C EXTERNAL PRESERVATIVE: MIL-PRF-16173, GRADE 4

MIL-STD-2073-1

3-E DESICCANT: MIL-D-3464, TY I (48 UNITS)

15. PACKING

A. LEVEL A 4-D CONTAINER: P/N: 12587578, CAGE: 19207

MIL-STD-2073-1 AND NOTE G

B. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE H

17. NOTES / DRAWING

** CONSISTS OF: 1 EA. DRESSED TRANSFER CASE, P/N 12627772, CAGE 19207 AND 1 EA. REUSABLE CONTAINER, P/N 12587578, CAGE 19207.

TRANSFER CASE WEIGHT IS 290 LBS. AND REUSABLE CONTAINER WEIGHT IS 868 LBS.

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE CONTAINER IN ACCORDANCE WITH A-A-52462, INCLUDING THE FIRST ARTICLE INSPECTION

REQUIREMENT.

B. FILL ITEM TO OPERATING LEVEL. ROTATE MECHANISM TO ENSURE 100% COVERAGE OF PRESERVATIVE ON INTERNAL SURFACES. REMOVE DRAIN PLUG AND DRAIN EXCESS PRESERVATIVE. REPLACE DRAIN PLUG

SECURELY.

(NOTE: IF THE ITEM HAS BEEN PREVIOUSLY RUN BY THE MANUFACTURER/NMWR SITE AND ALL INTERIOR SURFACES HAVE BEEN COATED WITH THE APPROVED LUBRICANT, ENSURE ALL LUBRICANT HAS BEEN

DRAINED. NO ADDITIONAL INTERNAL PRESERVATION IS REQUIRED.)

C. APPLY TO UNPAINTED, UNPLATED EXTERIOR METALLIC SURFACES.

D. PACK ITEM INTO REUSABLE CONTAINER IN ACCORDANCE WITH THE INSTALLATION DECAL LOCATED ON THE

REUSABLE CONTAINER USING SUPPLIED HARDWARE.

E. PLACE 48 DESICCANT UNITS INTO DESICCANT BASKET AND CLOSE DESICCANT PORT COVER.

F. THE PACKED REUSABLE CONTAINER WITH ITEM, SHALL BE PLACED IN A SHADED AREA AND MONITORED UNTIL THE INTERNAL RELATIVE HUMIDITY LEVEL STABILIZES AT OR BELOW 30 PERCENT. DESICCANT SHALL

BE REPLACED AS NEEDED UNIT A STABILIZED RELATIVE HUMIDITY LEVEL IS ACHIEVED.

(NOTE: THE STABILIZATION OF RELATIVE HUMIDITY LEVEL TYPICALLY REQUIRES A MINIMUM OF 24 HOURS

TO ACHIEVE.)

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

XCL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K8931 (19207) TRANSFER CASE WITH CONTAINER ** 19207 AK16753301

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-675-3301 05/23/2024 A

17. NOTES / DRAWING

G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

H. THE FOLLOWING SPECIAL MARKING SHALL BE APPLIED:

TRANSFER CASE ASSEMBLY SERIAL NUMBER SHALL BE STENCILED ON THE CONTAINER IN ACCORDANCE

WITH MIL-STD-129.

File details come from the government source that posted it. Updated .