AK12079240_Rev. E.pdf
PDF 47 KB Posted
- Attached to
- CYLINDER ASSEMBLY, ACTUATING, LINEAR Federal contract opportunity
- Solicitation number
- SPRDL1-23-R-0134
About this file
This document provides special packaging instructions for a cylinder assembly part number 19207. It specifies how to inspect, clean, preserve, and package the item in accordance with MIL-STD-2073-1D. The cylinder is to be lubricated, sealed, and have preservative applied to exposed surfaces. It must be blocked and braced for shipment in an ASTM D6880 container measuring 30-1/2 by 8-1/4 by 5-1/8 inches. Related solicitation SPRDL1-23-R-0134 from the Defense Logistics Agency Land and Maritime seeks this cylinder assembly, actuating, linear as identified by national stock number and commercial and government entity number. Requirements include inspection, cleaning, drying, preservation, unit packaging, packing, and marking in accordance with the special packaging instructions and applicable military standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL123R0134.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2079240 08/20/09
AK12079240
E
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
6-372-002270 (12361) CYLINDER ASSY 19207
A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND THE APPLICABLE
CONTAINER SPECIFICATION.
B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. WITH CYLINDER RODS FULLY RETRACTED, FILL WITH MANUFACTURER'S RECOMMENDED LUBRICANT.
THOUROUGHLY DRAIN EXCESS.
D. SEAL ALL OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. APPLY PRESERVATIVE TO ALL UNPAINTED/UNPLATED EXTERIOR SURFACES.
F. APPLY MATERIAL BETWEEN POINTS OF CONTACT OF ITEM WITH BLOCKING OR CONTAINER.
G. SEE PAGE 2 FOR CONSTRUCTION AND PLACEMENT OF BLOCKING/BRACING.
H. BOX SHALL BE CONSTRUCTED OF 1" NOMINAL LUMBER WITH 2" NOMINAL LUMBER ENDS AND NO END CLEATS
REQUIRED.
I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
1 EACH NONE 0080.0 0001.200
MIL-STD-2073-1D, METHOD 20
MIL-STD-2073-1D AND NOTE B
MIL-STD-2073-1D AND NOTE B
10. UNIT PACK CU. (CU. FT.) 11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1D AND NOTE I
NOT APPLICABLE
MIL-STD-129
033.4 009.7 006.6X X
b. LEVEL B
16. MARKING
a. LEVEL A
1C 2D 3E 4F 5G 6H
A/R A/R A/R A/R
PRESERVATIVE: SEE NOTES
CAPS/PLUGS: NAS847
PRESERVATIVE: MIL-PRF-16173, GR 4
WRAP: MIL-PRF-121, TY I, SIZE A/R.
BLOCKING AND BRACING: ASTM-D6199
CONTAINER: ASTM-D6880, CL 2, ST 1,
SIZE 30-1/2 X 8-1/4 X 5-1/8
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2079240 08/20/09
AK12079240
E
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
6-372-002270 (12361) CYLINDER ASSY 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
File details come from the government source that posted it. Updated .