Amendment 0001 to Solicitation No. SPRDL1-22-R-0007.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0001 2021DEC07

SPRDL1

DLA LAND WARREN

WARREN, MI 48397-5000

JON MACHACEK

EMAIL: JON.A.MACHACEK.CIV@MAIL.MIL

SPRDL1-22-R-0007

2021DEC02

X

X

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 3

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: JON MACHACEK

Buyer Office Symbol/Telephone Number: ZGBB/(586)467-1179

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

A. The purpose of this amendment is to provide offerors with the additional information required by Commercial Item Description (CID) A-

A-52462B, dated 28 November 2016, Sections 5.2(a) through (i), for each shipping/storage container required by this solicitation, as follows:

NSN 8145-01-676-5891 (CLINs 0001AA and 0002AA)______________________________________________

a. Title, number, and date of this CID: Containers, Shipping and Storage: Metal, Reusable; For Engines, Transmissions, Differentials, Transfers, and Similar Assemblies (Metric), A-A-52462B, 28 November 2016.

b. Type of container and title, number, and date of applicable engineering drawing (AED) and number: Type II, Controlled Breather

Container, Steel; Container, Shipping and Storage, Transmission; 10 November 2014; 12587533.

c. Welding, if other than as specified (see 2.3 of A-A-52462B): The required welding specification is listed on each of the subassembly drawings such as 12587554; those drawings all require WELD IAW ANSI/AWS D1.1.

d. Whether manufacturers test procedures and which ones are to be substituted for one or more of the performance tests (see 2.4 of A-A-

52462B): Unless waived in full or in part (Reference Section L-16 of the solicitation regarding waivers of first article testing), all tests listed in 2.4 are to be performed. In addition, conformance to 2.4.2.7 (finish treatment) and 2.4.2.8 (identification and marking) are also required reference paragraphs f. and g. below for additional information.

e. Whether a live load (component) is to be used instead of the dummy load for the rough handling tests and who will provide the live load (see 2.4.2 of A-A-52462B): Use of a dummy load is acceptable.

f. Preparation and painting if other than as specified and exterior color of paint topcoat (see 2.4.2.7 of A-A-52462B): The finish requirements are listed on each of the subassembly drawings; those drawings all require FINISH IAW 12369003, Interior and Exterior.

NOTE: TT-C-490 TYPE VII PERMITTED.

g. Whether additional markings are required (see 2.4.2.8 of A-A-52462B): Reference Special Packaging Instructions (SPI) AK16765891, Note C.

h. If first article is required and arrangements for first article inspection (see 3.2 of A-A-52462B): Reference solicitation for first article test requirements.

i. Packaging requirements: Reference solicitation for packaging requirements.

NSN 8145-01-676-6120 (CLINs 0003AA and 0004AA)______________________________________________

a. Title, number, and date of this CID: Containers, Shipping and Storage: Metal, Reusable; For Engines, Transmissions, Differentials, Transfers, and Similar Assemblies (Metric), A-A-52462B, 28 November 2016.

b. Type of container and title, number, and date of applicable engineering drawing (AED) and number: Type II, Controlled Breather

Containers, Steel; Container, Shipping and Storage, Transfer Case; 14 October 2014; 12587578.

c. Welding, if other than as specified (see 2.3 of A-A-52462B): The required welding specification is listed on each of the subassembly drawings such as 12587554; those drawings all require WELD IAW ANSI/AWS D1.1.

d. Whether manufacturers test procedures and which ones are to be substituted for one or more of the performance tests (see 2.4 of A-A-

52462B): Unless waived in full or in part (Reference Section L-16 of the solicitation regarding waivers of first article testing), all tests listed in 2.4 are to be performed. In addition, conformance to 2.4.2.7 (finish treatment) and 2.4.2.8 (identification and marking) are also required reference paragraphs f. and g. below for additional information.

e. Whether a live load (component) is to be used instead of the dummy load for the rough handling tests and who will provide the live load (see 2.4.2 of A-A-52462B): Use of a dummy load is acceptable.

f. Preparation and painting if other than as specified and exterior color of paint topcoat (see 2.4.2.7 of A-A-52462B): The finish requirements are listed on each of the subassembly drawings; those drawings all require FINISH IAW 12369003, Interior and Exterior.

NOTE: TT-C-490 TYPE VII PERMITTED.

g. Whether additional markings are required (see 2.4.2.8 of A-A-52462B): Reference Special Packaging Instructions (SPI) AK16766120, Note C.

h. If first article is required and arrangements for first article inspection (see 3.2 of A-A-52462B): Reference solicitation for first article test requirements.

i. Packaging requirements: Reference solicitation for packaging requirements.

NSN 8145-01-676-6125 (CLINs 0005AA and 00006AA)_______________________________________________

a. Title, number, and date of this CID: Containers, Shipping and Storage: Metal, Reusable; For Engines, Transmissions, Differentials, Transfers, and Similar Assemblies (Metric), A-A-52462B, 28 November 2016.

2 3

SPRDL1-22-R-0007

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

b. Type of container and title, number, and date of applicable engineering drawing (AED) and number: Type II, Controlled Breather

Containers, Steel; Container, Shipping and Storage, Engine; 1 December 2014; 12587603.

c. Welding, if other than as specified (see 2.3 of A-A-52462B): The required welding specification is listed on each of the subassembly drawings such as 12587554; those drawings all require WELD IAW ANSI/AWS D1.1.

d. Whether manufacturers test procedures and which ones are to be substituted for one or more of the performance tests (see 2.4 of A-A-

52462B): Unless waived in full or in part (Reference Section L-16 of the solicitation regarding waivers of first article testing), all tests listed in 2.4 are to be performed. In addition, conformance to 2.4.2.7 (finish treatment) and 2.4.2.8 (identification and marking) are also required reference paragraphs f. and g. below for additional information.

e. Whether a live load (component) is to be used instead of the dummy load for the rough handling tests and who will provide the live load (see 2.4.2 of A-A-52462B): Use of a dummy load is acceptable.

f. Preparation and painting if other than as specified and exterior color of paint topcoat (see 2.4.2.7 of A-A-52462B): The finish requirements are listed on each of the subassembly drawings; those drawings all require FINISH IAW 12369003, Interior and Exterior.

NOTE: TT-C-490 TYPE VII PERMITTED.

g. Whether additional markings are required (see 2.4.2.8 of A-A-52462B): Reference Special Packaging Instructions (SPI) AK16765125, Note C.

h. If first article is required and arrangements for first article inspection (see 3.2 of A-A-52462B): Reference solicitation for first article test requirements.

i. Packaging requirements: Reference solicitation for packaging requirements.

B. All other terms and conditions remain unchanged.

*** END OF NARRATIVE A0002 ***

3 3

SPRDL1-22-R-0007

SECTION A