SPI 463.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321709 (19207) HOUSING ASSY 19207 AK11704900

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-170-4900 12-8-2006 D

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 310.0 9.591 30.0 X 27.9 X 19.8

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 43

13. CLEANING SEE NOTES

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE I

b. LEVEL B

MIL-STD-2073-1D AND NOTE I

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

B. FLUSH OR SLUSH (AS APPLICABLE) INTERNALLY WITH PRESERVATIVE OIL, ITEM 1, AND THOROUGHLY DRAIN EXCESS. ALSO APPLY PRESERVATIVE OIL, ITEM 1, TO ALL UNPAINTED EXTERIOR METALLIC

SURFACES.

C. PREPARE CUSHIONING PAD, ITEM 3, PLYWOOD BASE, ITEM 5, AND BASE OF CONTAINER, ITEM 6, AS

SHOWN ON PAGE 2.

D. CEMENT GASKETS, ITEM 11, TO BOTH SIDES OF BARRIER ENVELOPE USING ADHESIVE, ITEM 12, AT

HOLE LOCATIONS SHOWN ON PAGE 2.

E. INSTALL CARRIAGE BOLTS, ITEM 7, UP THROUGH BASE OF THE CONTAINER, THE PLYWOOD BASE, THE

CUSHIONING, THE BARRIER ENVELOPE AND THE WRAP, AS SHOWN ON PAGE 3.

F. LOWER THE HOUSING ASSY ONTO BASE OF CONTAINER SO THAT THE CARRIAGE BOLTS PASS

THROUGH THE HOLES IN THE FLANGE OF THE HOUSING ASSY. SECURE WITH FLAT WASHER, LOCK

WASHER, AND NUT, AS SHOWN ON PAGE 3.

G. GATHER THE WRAP AROUND THE HOUSING ASSY AND SECURE IN PLACE WITH TAPE.

H. CLOSE AND HEAT SEAL THE SIDES AND TOP OF THE BARRIER ENVELOPE, ITEM 4. ELIMINATE EXCESS

AIR TO COMPLETE WATERVAPORPROOF METHOD 43.

I. THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A AND LEVEL B SHIPPING CONTAINER.

J. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321709 (19207) HOUSING ASSY 19207 AK11704900

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-170-4900 12-8-2006 D

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

11-1/811-1/8

13-7/16

26-7/8

11-3/16

13-7/16

26-7/8

11-3/16

1-3/16

1-3/16

4444 5 CUSHIONING AND PLYWOOD BASEAND

AND HOLE LAYOUT FOR WRAP AND BARRIER ENVELOPE

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321709 (19207) HOUSING ASSY 19207 AK11704900

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-170-4900 12-8-2006 D

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

BASE OF CONTAINER

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321709 (19207) HOUSING ASSY 19207 AK11704900

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-170-4900 12-8-2006 D

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 PRESERVATIVE OIL MIL-PRF-32033 A/R

2 WRAP 72 X 36 MIL-PRF-121, TYPE II 1

3 CUSHIONING 26-7/8 X 26-7/8 A-A-1051, TYPE II 1

4 BARRIER ENVELOPE 80 X 36 MIL-E-6060 1

5 PLYWOOD BASE 26-7/8 X 26-7/8 A-A-55057, TYPE A 1

6 CONTAINER 27 X 27 X 16 ASTM-D6880, CLASS 2, STYLE 4 1

7 CARRIAGE BOLT 3/4 X 3 SEE NOTE 1 4

8 FLAT WASHER 3/4 SEE NOTE 1 4

9 LOCK WASHER 3/4 SEE NOTE 1 4

10 NUT 3/4 SEE NOTE 1 4

11 GASKET 3 X 3 X 1/16 ASTM F 104 (F210000) 8

12 ADHESIVE MMM-A-260, TYPE II, GRADE B, CLASS

A/R

NOTE 1 : COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING OR PRESERVATIVE COATING

CONFORMING TO MIL-C-16173, GRADE 4.