SPI_AK15803591.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

SW

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3847755 (45152) STEERING GEAR, MASTER 19207 AK15803591

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-580-3591 7/14/2011

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 208.5 6.909 28.0 X 20.5 X 20.8

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, METHOD 43

13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-16173, GR 4

MIL-STD-2073-1D 2-C 1 CUSHIONING: A-A-59135, CL 1, GR A

14. DRYING SIZE:108 X 12

MIL-STD-2073-1D 3-D 11 BLOCKING/BRACING: ASTM-D6199

15. PACKING

4-E 1 ENVELOPE: MIL-DTL-6060E, SIZE: 73 X 43

5-F 1 CONTAINER: ASTM-D6880, CL 2, ST 7

a. LEVEL A

SIZE: 25 X 19 X 15

MIL-STD-2073-1D & NOTE G

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.

C. WRAP ITEM IN FOAM, SECURE WITH TAPE ASTM-D6123.

D. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO

ASTM-F1667, SEE PAGE 2-3 FOR SIZES AND ORIENTATION.

E. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BARRIER AT THE MOUNTING LOCATION USING MMM-A-

260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A

SUFFICIENT QUANTITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE

AIRTIGHT SEAL.

F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D6880 USING 5/16” X 3” LAG SCREWS FASTENED

INTO SKID MEMBERS.

G. THE UNIT CONTIANER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 SW

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3847755 (45152) STEERING GEAR, MASTER 19207 AK15803591

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-580-3591 7/14/2011

ITEM SIZE QTY DESCRIPTION

A 21 X 14-3/4 X ½ PLY 1 ASTM-D6199

B 1 X 8 X 14-3/4 2 ASTM-D6199

C 2 X 4 X 7-1/4 4 ASTM-D6199

D 7-1/4 X 14-3/4 X ½ PLY 2 ASTM-D6199

E 2 X 8 X 14-3/4 2 ASTM-D6199

F 1/2" X 13” HARDWARE SET 4

HARDWARE SET CONSISTS OF: 1PC ½” X 13”

CARRIAGE BOLT, 1PC ½” FLAT WASHER, 1PC ½”

LOCK WASHER & 1PC ½” NUT

G 73 X 43 ENVELOPE 1 MIL-DTL-6060E

H 22 X 16 GASKET 2 MIL-DTL-6060E

I 25 X 19 X 15 1 ASTM-D6880, CL 2, ST 7

CRADLE ASSEMBLY HOLD-DOWN ASSEMBLY

G

H

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 SW

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3847755 (45152) STEERING GEAR, MASTER 19207 AK15803591

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-580-3591 7/14/2011

A

B

C

D

E

CRADLE ASSEMBLY

HOLD-DOWN

ASSEMBLIES

BASE WITH 2X DECKING

NOTE: ALL HOLES ARE ½” DIAMETER