SPI.pdf
PDF 126 KB Posted
- Attached to
- Transmission Fluid Cooler Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-19-R-0135
About this file
Special Packaging Instructions (SPI)
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL1-19-R-0135_FBO_Solicitation_(Transmission_Fluid_Cooler_Assembly).pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12311196 (19207) COOLER, FLUID, TRANSM 19207 AK10673874
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2520-01-067-3874 05/05/2010 F
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 84.0 3.087 28.4 X 22.1 X 8.5
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 20 SEE NOTES
13. CLEANING
MIL-STD-2073-1D
14. DRYING
MIL-STD-2073-1D
15. PACKING
a. LEVEL A
MIL-STD-2073-1D AND NOTE G
b. LEVEL B
MIL-STD-2073-1D AND NOTE G
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. FLUSH INTERIOR OF PART WITH PRESERVATIVE, ITEM 1, THEN DRAIN EXCESS. INSERT PLUG, ITEM 2, INTO EACH PORT OF PART. IF PART HAS BEEN RECEIVED PRESERVED AND PLUGGED, THEN FLUSHING
AND PLUGGING STEPS MAY BE ELIMINATED.
B. WRAP PART WITH WRAP, ITEM 3, AND SECURE WITH A WEATHER RESISTANT TAPE.
C. COVER GRILL SURFACES OF THE WRAPPED PART WITH PAD, ITEM 4A. PLACE ONE PAD ON THE
SURFACE SIDE WITH PORT AND TWO PADS ON THE OPPOSITE SIDE. SECURE IN PLACE WITH A
WEATHER RESISTANT TAPE.
D. PLACE PADDED PART FROM NOTE C INTO CONTAINER, ITEM 5.
E. FILL VOIDS BETWEEN WRAPPED PART AND CONTAINER WITH PADS ITEMS 4B, 4C, AND 4D.
F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-
STD-147 MAY BE USED FOR GUIDANCE.
H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-
1D AND THE APPLICABLE CONTAINER SPECIFICATION.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12311196 (19207) COOLER, FLUID, TRANSM 19207 AK10673874
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2520-01-067-3874 05/05/2010 F
BILL OF MATERIALS
ITEM
NUMBER
DESCRIPTION
SIZE
SPECIFICATION DATA
QTY.
1 PRESERVATIVE MIL-PRF-32033 A/R
2 PLUG NAS OR EQUIVALENT 2
3 WRAP 54 X 36 MIL-PRF-121, TYPE I, STRETCHABLE. 1
4 PAD ASTM-D4727, TYPE CF, CLASS WR,
VARIETY TW, GRADE 1100.
4A 21 X 19 3
*4B 20 X 7-1/2 2
*4C 12 X 7-1/2 3
*4D 12 X 7-1/2 3
**5 CONTAINER 28 X 21-3/4 X 7-3/4 ASTM-D5118, TYPE CF, CLASS WR,
STYLE RSC-L, VARIETY DW, GRADE
V13c.
* GLUE SPECIFIED QTY. OF EACH PAD TOGETHER TO FORM ITEMS 4B, 4C, AND 4D, USING A GOOD
GRADE OF COMMERCIAL WATERPROOF ADHESIVE.
** CONTAINER LINER TO BE MADE OF WEATHER RESISTANT, TRIPLE WALL, GRADE 1100, CORRUGATED.
4D
4C
4A
4A 4A
(QTY=3)
(QTY=3)
4B(QTY=2)
POSITIONING OF PADS
File details come from the government source that posted it.