SPI_-_AK11657029.pdf
PDF 130 KB Posted
- Attached to
- Relay Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-19-R-0032
About this file
SPI - AK11657029
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119R0032.pdf | ||
| Synopsis_-_81L614_-_SPRDL1-19-R-0032.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
XCC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12321714 (19207) CARRIER, PLANETARY R 19207 AK11657029
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2835-01-165-7029 8-30-2006 M
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE *281.5 *10.725 *28.5 X 25.5 X 25.5
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 43 1A A/R PRESERVATIVE: MIL-PRF-21260, PE-30.
13. CLEANING 2B A/R CAPS/PLUGS: NAS OR EQIVALENT.
MIL-STD-2073-1D 3C A/R PRESERVATIVE: MIL-PRF-16173, GRADE 4.
14. DRYING 4D 1 WRAP: MIL-PRF-121, TYPE I, SIZE: A/R.
MIL-STD-2073-1D 5D 1 CUSHIONING: A-A-1051, TYPE II, SIZE: A/R.
6 1 BARRIER ENVELOPE: MIL-DTL-6060, SIZE: A/R.
15. PACKING 7E A/R GASKET: ASTM-F104, SIZE: 3 X 3 X 1/8.
a. LEVEL A 8E A/R ADHESIVE: MMM-A-260.
MIL-STD-2073-1D AND NOTE G 9F 1 CONTAINER: ASTM-D6880, STYLE 2, CLASS 2,
b. LEVEL B SIZE: A/R.
MIL-STD-2073-1D AND NOTE G
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. PRESERVE INTERNALLY WITH OPERATIONAL LUBRICANT. THROUGHLY DRAIN EXCESS.
B. SEAL ALL OPENINGS WITH CAPS/PLUGS. IF PART IS RECEIVED WITH CAPS INSTALLED THEN THIS STEP
MAY BE ELIMINATED.
C. APPLY PRESEVATIVE TO EXTERNAL BARE FERROUS SURFACES.
D. SECURE WITH TAPE.
E. ADHERE GASKETS TO BOTH SIDES OF BARRIER ENVELOPE AT MOUNTING HOLE LOCATIONS USING ADHESIVE. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUANTITY OF ADHESIVE SHALL
BE APPLIED AROUND THE BOLT AND GASKET TO PROVIDE AN AIR TIGHT SEAL.
F. ITEM SHALL BE ANCHORED WITHIN THE CONTAINER WITH A MINIMUM OF ONE INCH CLEARANCE BETWEEN THE BARRIER AND THE SIDES, ENDS, AND TOP OF THE CONTAINER. SECUREMENT OF THE ITEM WITHIN THE CONTAINER SHALL BE ACCOMPLISHED IN SUCH A MANNER THAT NO DAMAGE WILL
OCCUR TO EITHER THE PACKAGE OR THE ITEM AND SHALL MEET THE REQUIREMENTS OF
MIL-STD-2073-1D.
G. THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A AND LEVEL B SHIPPING CONTAINER.
H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.
* UNIT PACK WT, CU, AND SIZES ARE ESTIMATED AND ARE PROVIDED FOR INTERNAL GOVERNMENT
PLANNING PUPOSES ONLY.
File details come from the government source that posted it.