SPI.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

5705520 (19207) PARTS KIT, FAN 19207 AK13823597

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4140-01-382-3597 6-20-2005 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 13.9 2.008 16.5 X 14.5 X 14.5

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, SEE BLOCK 17 SEE NOTES

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE J

b. LEVEL B

MIL-STD-2073-1D AND NOTE J

16. MARKING

MIL-STD-129 AND NOTE B

17. NOTES / DRAWING

A. THIS KIT, AS SHOWN ON REVISION B OF DRAWING 5705520, CONSISTS OF THE FOLLOWING PARTS

CONSOLIDATED INTO 14 SEGREGATED PACKAGES.

SEGREGATED METHOD OF

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY. PRESERVATION

1 12336769 19207 FAN, TUBEAXIAL ASS 1 31

2 M83248/1-154 81349 O-RING 1 41

3 M83248/1-148 81349 O-RING 1 41

4 M83248/1-132 81349 O-RING 1 41

5 M83248/1-904 81349 O-RING 1 41

6 M83248/1-906 81349 O-RING 2 41

7 M83248/1-908 81349 O-RING 1 41

8 12387152-3L 19207 SCREW 3 31

9 12387152-8L 19207 SCREW 1 31

10 12387152-5L 19207 SCREW 2 31

11 12387152-6L 19207 SCREW 9 31

12 MS24665-308 96906 PIN, COTTER 2 31

13 B1821BH025C050L 80204 BOLT, MACHINE 2 31

14 B1821BH025C075L 80204 BOLT, MACHINE 1 31

B. MARKING.

MARK UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. IN ADDITION, ATTACH A PACKING LIST TO THE UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. ON THE PACKING LIST IDENTIFY THE ITEMS

WITHIN EACH SEGREGATED PACKAGE TOGETHER WITH THERE SEGREGATED PACKAGE NUMBER.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

5705520 (19207) PARTS KIT, FAN 19207 AK13823597

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4140-01-382-3597 6-20-2005 A

C. REFER TO THE BILL OF MATERIALS FOR REFERENCED ITEM NUMBERS ON THE ACCOMPANYING PAGES.

D. PREPARE THE FOLLOWING PARTS AS DESCRIBED BELOW:

SEGREGATED

PART NUMBER NOMENCLATURE QTY. BAG STIFFENER PACKAGE

M83248/1-154 O-RING 1 4B 2 2

M83248/1-148 O-RING 1 4B 2 3

PLACE EACH PART BETWEEN THE STIFFENERS AND SECURE WITH TAPE IN SUCH A WAY THAT IT WILL NOT TOUCH OR EXERT PRESSURE THAT WOULD SUBJECT PARTS TO SET OR DISTORTION. PLACE EACH

ITEM INTO THE SPECIFIED BAG AND CLOSE BAG BY HEAT SEALING.

E. PREPARE THE FOLLOWING PARTS AS DESCRIBED BELOW:

SEGREGATED

PART NUMBER NOMENCLATURE BAG QTY. PACKAGE

M83248/1-132 O-RING 4A 1 4

M83248/1-904 O-RING 4A 1 5

M83248/1-906 O-RING 4A 2 6

M83248/1-908 O-RING 4A 1 7

12387152-3L SCREW 3A 3 8

12387152-8L SCREW 3A 1 9

12387152-5L SCREW 3A 2 10

12387152-6L SCREW 3B 9 11

MS24665-308 PIN, COTTER 3A 2 12

B1821BH025C050L BOLT, MACHINE 3A 2 13

B1821BH025C075L BOLT, MACHINE 3A 1 14

PLACE THE TOTAL QUANTITY OF EACH ITEM INTO THE SPECIFIED BAG AND CLOSE BAG BY HEAT

SEALING, STAPLING, OR TAPING.

F. 12336769, COOLING TURBINE, SEGREGATED PACKAGE 1, QUANTITY 1.

1. PROVIDE A PROTECTIVE COVERING OVER THE LARGE 4 INCH DIA. OPENING ON THE FAN OUTLET IN

ORDER TO PREVENT CONTAMINANTS FROM ENTERING THE PART. CAP AND PLUG ALL REMAINING

INLETS AND OUTLETS WITH CAP/PLUG, ITEM 1.

2. WRAP PART WITH WRAP, ITEM 5, AND SECURE WITH TAPE.

G. CONSOLIDATE SEGREGATED PACKAGES 2 THRU 14 INTO BAG, ITEM 3C, AND CLOSE BY HEAT SEALING

OR TAPING.

H. PLACE THE CONSOLIDATED PACKAGES FROM NOTE G NEXT TO THE PREPARED COOLING TURBINE, BETWEEN THE INLETS AND FAN OUTLET, THEN WRAP WITH CUSHIONING, ITEM NO TAG, AND SECURE

WITH TAPE.

I. PLACE CONSOLIDATED PACKAGES FROM NOTE H INTO BAG, ITEM 4C. CLOSE BAG BY HEAT SEALING TO FORM A MIL-STD 2073-1D, METHOD 41 PACK. PLACE PREPARED KIT INTO CONTAINER, ITEM 7.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

5705520 (19207) PARTS KIT, FAN 19207 AK13823597

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4140-01-382-3597 6-20-2005 A

J. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.

MIL-HDBK-774 MAY BE USED FOR GUIDANCE.

K. INSPECT THE PRESERVATION (SEE NOTE A), THE SEGREGATED PACKAGES, CONSOLIDATION PACKS, UNIT PACK AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND THE APPLICABLE CONTAINER

SPECIFICATION.

BILL OF MATERIALS

ITEM

NUMBER

DESCRIPTION

SIZE

SPECIFICATION DATA

QTY.

1 CAP/PLUG A/R NAS834 OR EQUIVALENT. 4

2 STIFFENER 4-1/2 X 4-1/2 X 0.040 ASTM-D4727, TYPE SF, CLASS D. 4

3 BAG MIL-DTL-117, TYPE II, CLASS C.

3A 2-1/2 X 3 6 3B 3 X 5 1 3C 6 X 8 1

4 BAG MIL-DTL-117, TYPE II, CLASS E.

4A 2-1/2 X 3 4 4B 6 X 8 2 4C 14 X 20 1

5 WRAP 28 X 15 A-A-3174, POLYETHYLENE,

THICKNESS 4 MIL.

6 CUSHIONING 30 X 16 X ¼ A-A-59135, CLASS 1, GRADE A. 1

7 CONTAINER 14 X 14 X 16 PPP-B-1672, TYPE I, STYLE A, NSN:

8115-00-134-3656.