SPI_12366878.pdf
PDF 27 KB Posted
- Attached to
- Link, Brake Shoe Adj Federal contract opportunity
- Solicitation number
- SPRDL1-18-R-0078
About this file
Special Packaging Instruction
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL118R0078-0002.pdf | ||
| SPRDL118R0078-0001.pdf | ||
| SPRDL118R0078.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12366878 (19207) ADJUSTING LINK ASSY, LEFT
SIDE
19207 AK14805659
4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION
2530-01-480-5659 3-19-2001
7. QUP 8. ICQ 9. UNIT PACK WT.(LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 74.0 0.941 25.8 x 8.4 x 7.5
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 20 & NOTE A 1-C PRESERVATIVE: MIL-PRF-10924
13. CLEANING 2-D CAPS/PLUGS: NAS 847
MIL-STD-2073-1D & NOTE B 3-E 2 WRAP: MIL-B-121, TY II, CL 2, GR A, SIZE: 24 X 18
14. DRYING 4-F BLOCKING/BRACING:
MIL-STD-2073-1D & NOTE B 5-G BARRIER: MIL-B-121, TYII, CL2
6-H 1 CONTAINER: PPP-B-621, CL 2, ST 4,
15. PACKING
SIZE: 22-3/4 X 6 X 6-7/8
a. LEVEL A 7-J CLOSURE: SCREWS, FF-S-111
MIL-STD-2073-1D & NOTE K
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE L
17. NOTES/DRAWINGS
A. THE UNIT PACK SHALL PROVIDE PHYSICAL AND MECHANICAL PROTECTION TOGETHER WITH A
PRESERVATIVE COATING.
B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. APPLY PRESERVATIVE TO ALL BARE METAL SURFACES.
D. SEAL ALL OPENINGS OF THE ADJUSTING LINK ASSEMBLY WITH CAPS/PLUGS OF THE APPROPRIATE
SIZE.
E. APPLY A SINGLE WRAP TO EACH END OF ADJUSTING LINK ASSEMBLY. SECURE WITH TAPE
ASTM D 5486, TY IV.
F. USE WOOD BLOCKING AND BRACING AS SHOWN ON PAGE 2.
G. APPLY BARRIER MATERIAL BETWEEN ALL SECTIONS OF THE ADJUSTING LINK THAT COME IN DIRECT
CONTACT WITH THE INTERIOR OF CONTAINER AND/OR BLOCKING/BRACING.
H. CONTAINER IS CONSTRUCTED OF ALL 1 INCH THICK NOMINAL LUMBER.
J. TOP OF CONTAINER SHALL BE SECURED TO SIDES AND ENDS WITH WOOD SCREWS.
K. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING EITHER CLEATED-PLYWOOD BOXES, OVERSEAS TYPE, CONFORMING TO PPP-B-601 OR NAILED WOOD BOXES CONFORMING TO PPP-B-621, CLASS 2.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-HDBK-774.
L. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM 1/2 INCH BLACK LETTERS “REUSABLE CONTAINER, DO NOT DESTROY”. IN ADDITION, THE TOP SHALL BE MARKED “REMOVE SCREWS TO OPEN CONTAINER” USING MINIMUM 1/2
INCH HIGH BLACK LETTERS.
DD Form 2169, JUN 1997 Previous editions are obsolete. Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
-BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12366878 (19207) ADJUSTING LINK ASSY, LEFT
SIDE
19207 AK14805659
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-480-5659 3-19-2001
17. NOTES/DRAWINGS CONTINUED
DD Form 2169C, JUN 1997 Previous editions are obsolete Page 2 of 2 Pages
File details come from the government source that posted it.