SPI_858.pdf

PDF 202 KB Posted Sep 5, 2018

Attached to: RING ASSEMBLY, PUMP Federal contract opportunity
Solicitation number: SPRDL1-18-Q-0668
Issued by: Department of the Army Materiel Command TACOM Life Cycle Management Command

About this file

From the source

SPECIAL PACKAGING INSTRUCTIONS

View the file

Other files for this federal contract opportunity

Other files attached to RING ASSEMBLY, PUMP, newest first.
File	Type	Posted
SPRDL119P0074-P00002.pdf	PDF	Oct 1, 2019
SPRDL118Q0668-0001.pdf	PDF	Sep 5, 2018
SPRDL118Q0668.pdf	PDF	Sep 5, 2018

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321990 (19207) RING ASSEMBLY, HANGI 19207 AK13283433

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-328-3433 11-21-2006 B

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 88.0 2.404 27.8 X 18.0 X 8.3

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 SEE NOTES

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE G

b. LEVEL B

MIL-STD-2073-1D AND NOTE G

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

B. WRAP PART WITH WRAP, ITEM 1, AND SECURE WITH TAPE.

C. SECURE PREPARED PART TO PLYWOOD BASE, ITEM 2, USING BLOCKING AND HARDWARE, ITEMS 3, 4, 5, 6, AND 7 PUSHING HOLES THROUGH WRAP WITH BOLTS, ITEM 4. SEE PAGE 3.

D. SECURE SLEEVE, ITEM 8, WITH TAPE. PLACE PREPARED PART AND SLEEVE INTO CONTAINER, ITEM 9.

CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B1, 4B3, OR 4B4.

E. PLACE PREPARED CONTAINER INTO BAG, ITEM 10, AND CLOSE BAG BY HEAT SEALING.

F. PLACE BAGGED CONTAINER INTO CONTAINER, ITEM 11, AND CLOSE CONTAINER IN ACCORDANCE WITH

ASTM-D1974, METHOD 4B2.

G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.

MIL-HDBK-774 MAY BE USED FOR GUIDANCE.

H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321990 (19207) RING ASSEMBLY, HANGI 19207 AK13283433

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-328-3433 11-21-2006 B

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

FLUTE DIRECTION

SCORE LINE

7-3/8 9-1/8

5-1/8

11-3/8

16-1/2

1-3/4 20-7/8

24-1/4

28-1/8

68-1/8

3/4 THICK

1 RAD. (4 PLACES)

5/8 DIA. (4 PLACES)

3-1/2

1-7/8 8-1/8

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321990 (19207) RING ASSEMBLY, HANGI 19207 AK13283433

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-328-3433 11-21-2006 B

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

6 (4 PLACES)

5 (4 PLACES)

7 (4 PLACES)

4 (4 PLACES)

P/N: 12321990

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12321990 (19207) RING ASSEMBLY, HANGI 19207 AK13283433

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-328-3433 11-21-2006 B

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 WRAP 38 X 27 MIL-PRF-121, TYPE II, STRETCHABLE. 1

2 PLYWOOD BASE SEE PAGE 2 A-A-55057, TYPE A, 3/4 INCH. 1

3 BLOCKING SEE PAGE 2 ASTM-D6199, CLASS 2, GROUP II OR

III.

*4 CARRIAGE BOLT 5/8 X 5-1/2 COMMERCIAL GRADE. 4

*5 WASHER, FLAT 5/8 COMMERCIAL GRADE. 4

*6 WASHER, LOCK 5/8 COMMERCIAL GRADE. 4

*7 NUT 5/8 COMMERCIAL GRADE. 4

8 SLEEVE SEE PAGE 2 ASTM-D4727, TYLE CF, CLASS D,

VARIETY DW, GRADE 500.

9 CONTAINER 16-3/4 X 7 X 24-1/2 ASTM-D5118, TYPE CF, CLASS D,

STYLE FOL, VARIETY DW, GRADE 500.

10 BAG 26 X 36 MIL-DTL-117, TYPE I, CLASS E. 1

11 CONTAINER 17-5/8 X 7-7/8 X 26-5/8 ASTM-D5118, TYPE CF, CLASS WR,

STYLE FOL, VARIETY SW, GRADE W5c.

* COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING OR

PRESERVATIVE COATING CONFORMING TO MIL-PRF-16173, GRADE 4.

File details come from the government source that posted it.