Special_Packaging_Instruction_AK15924948.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 12517507 (19207) FSSO SEAT ASSEMBLY 19207 AK15924948

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2540-01-592-4948 10/03/2013 -

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 125.1 8.850 39.8 X 26.5 X 14.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 10 AND NOTE A

13. CLEANING 1-D ITEM PREPARATION

MIL-STD-2073-1D & NOTE B

14. DRYING 2-E 1 WRAP: MIL-PRF-121, TY II, SIZE: 70 X 46

MIL-STD-2073-1D & NOTE B

15. PACKING

3-F BLOCKING/BRACING: ASTM D6199, GROUP I OR II

a. LEVEL A

4-G 1 CONTAINER: ASTM D6880, CL 2, ST 4, MODIFIED

MIL-STD-2073-1D & NOTE C SIZE: 36-3/4 X 25 X 9-1/2

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1D.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.

C. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

D. FOLD BOTTOM SEAT TO BACKREST. FASTEN SEATBELT AROUND BOTTOM SEAT AND TIGHTLY SECURE.

E. APPLY A SINGLE WRAP TO SEAT ASSEMBLY. SECURE WITH TAPE ASTM D5486.

F. SEE PAGE 2. SECURE BLOCKING WITH ASTM F1667 NAILS.

G. MODIFIED CONTAINER IS CONSTRUCTED OF 1-INCH THICK NOMINAL LUMBER WITH 2-INCH THICK

NOMINAL ONE-PIECE ENDS AND CLEATS AND IS MODIFIED TO INCLUDE BEVELED SKIDS. SIZE AND

APPLICATION OF SKIDS ARE IN ACCORDANCE WITH ASTM D6880.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

-BM

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12517507 (19207) FSSO SEAT ASSEMBLY 19207 AK15924948

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2540-01-592-4948 10/03/2013 -

17.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 2 Pages