SPI_AK14936059.pdf

Page 1 of 1 Pages

DD Form 2169, SEP 96 (Replica) Previous editions are obsolete

Form Approved -SS/MB OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12414438-009 (19207) TRANSMISSION, DRESSED WITH CONTAINER 19207 AK14936059

2520-01-493-6059 10-31-01

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directors for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please do not return your form to either of these addresses.

18. 19. 20.

STEPS REQD DESCRIPTION

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1D. INSPECT PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

B. 12414438-009, TRANSMISSION, DRESSED, WITH CONTAINER, CONSISTS OF THE FOLLOWING:

1. TRANSMISSION, PART NUMBER 12378396-009.

2. CONTAINER, PART NUMBER 12414256, CONTAINER WEIGHT = 1040 LB.

C. PRESERVATION:

FILL TRANSMISSION TO OPERATING LEVEL WITH OPERATIONALOIL, ROTATE MECHANISM TO ENSURE COMPLETE COVERAGE. REMOVE DRAIN PLUG, DRAIN OPERATIONAL OIL AND REINSTALL DRAIN PLUG. TORQUE TO 18-24 FT-LBS.

IF INTERNAL PRESERVATION IS ACCOMPLISHED DURING MANUFACTURE AND IF MEASURES HAVE BEEN TAKEN TO PREVENT

CONTAMINATION, INTERNAL PRESERVATION SHALL NOT BE REPEATED.

APPLY MIL-PRF-16173, GRADE 4 TO ALL UNPAINTED, UNPLATED, EXTERIOR METALLIC SURFACES.

OPENINGS THAT PERMIT TRANSMISSION CONTAMINATION SHALL BE SEALED WITH SAE-AMS-T-22085, TYPE II TAPE OR CAPS / PLUGS

CONFORMING TO NAS847 (REPLACES MIL-C-5501).

D. PLACE 64 UNITS OF DESICCANT INTO CONTAINER DESICCANT BASKET.

E. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

1C PRESERVATIVE: SEE NOTE B.

2D DESICCANT: MIL-D-3464.

1 EACH NONE 2207.5 78.164 70.9 X 44.2 X 43.1

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

12. MILITARY PRESERVATION

METHOD 55

16. MARKING

MIL-STD-129

MIL-STD-2073-1D, PROCEDURE 1

13. CLEANING

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE E

b. LEVEL B

NOT APPLICABLE

MIL-STD-2073-1D

14. DRYING