Exhibit_A_MULTIBAND_AMPLIFIER_Technical_Requirements_2017_08August11.pdf

Attachment 0001 SPRBL1-18-R-0016 Page 1 of 9 Issue: 11 August 2017

TECHNICAL REQUIREMENTS

ARMY AIRBORNE COMMAND AND CONTROL SYSTEM

MULTIBAND AMPLIFIER

A-3575

Aberdeen Proving Ground, Maryland

Attachment 0001 SPRBL1-18-R-0016 Page 2 of 9

TABLE OF CONTENTS

APPLICABLE DOCUMENTS

CONFIGURATION BASELINE

Obsolescence Reporting

Part Revisions

Ozone Depleting Chemicals 3

Year 2000 3

Special Instructions

Electrostatic Discharge Labels 3

Electrostatic Discharge Sensitive (ESDS) Warranty Items 3

Item Unique Identification 3

Requirements for Value Engineering

Value Engineering Information 3

PACKAGING

Wood Packing Material

Military Packaging

SPECIALIZED TESTING

CONTRACT SECURITY

CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

Individual CDRLs

Attachment 0001 SPRBL1-18-R-0016 Page 3 of 9

APPLICABLE DOCUMENTS

Military and Federal Standards MIL-STD-129R Military Marking for Shipment and Storage MIL-STD-130N(1) Identification Marking of US Military Property

Military and Federal Specifications

Other Documents

Commercial Documents

A-3575 MULTIBAND AMPLIFIER

ISPM 15 International Standards For Phytosanitary Measures

CONFIGURATION BASELINE

The applicable Configuration Baselines (CB), for the listed Configuration Item (CI) and/or Computer Software Configuration Item (CSCI), are as listed in the table below.

NSN Nomenclature Part No. CAGE Company

5985-01-590-5109 MULTIBAND AMPLIFIER A-3575 6LBA7 ULTRALIFE CORPORATION

Part Revisions The Government shall be notified of any changes in parts to manufacture these items (Configuration Control/Management) per CDRL DD Form 1423 for DI-MISC-80711A. The Government does not have to accept items that have configuration changes not approved by the procuring Government activity.

Obsolescence Reporting The contractor shall provide source data that will enable the identification, forecasting and management of piece part obsolescence impacts and mitigations. The DMSMS data shall be provided in accordance with the CDRL (DD Form 1423) for DI-SESS-81656.

Ozone Depleting Chemicals There are no Ozone Depleting Chemicals used in these items.

Year 2000 Year 2000 (Y2K) does not affect any of these items.

Special Instructions Electro-Static Discharge Labels: All items shall have an ESDS caution note and symbol per MIL-STD-130N with change 1 paragraph 5.9 on the item as required. The caution note and symbol shall be in a location readily visible to personnel that does not interfere with the normal operation of the item or obstruct any other markings as required by MIL- STD-130N with change 1 and the procurement contract.

Electro-Static Discharge Sensitive (ESDS) Warranty Items. All ESDS warranty items returned for repair shall insure that the ESDS caution note and symbol per MIL-STD-130N with change 1 paragraph 5.9 on the item are still legible after repair as required. The caution note and symbol shall be in a location readily visible to personnel that does not interfere

Attachment 0001 SPRBL1-18-R-0016 Page 4 of 9 with the normal operation of the item or obstruct any other markings as required by MIL-STD-130N with change 1 and the procurement contract.

IUID: All items shall have an IUID assigned and marked in a conspicuous area of the item so as to not interfere with usage. IUID shall be IAW DFARS 252.211-7003 Item Unique Identification and Valuation.

IUID shall include but not limited to NSN, Serial Number, part number and nomenclature. Marking shall be permanent Human Readable characters per MIL-STD-130N with change 1.

Requirements for Value Engineering. The submission of VECPs is encouraged to eliminate unnecessary requirements, reduce costs, and improve functionality of Team Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) managed weapon systems. VECPs can increase the value of delivered products and services and improve contractor profit. FAR clause 52.248-1 is incorporated by reference.

Value Engineering Information. To obtain more information about Value Engineering teaming within C4ISR, contact the Value Concepts Office at:

HEADQUARTERS U.S. ARMY CECOM LCMC

ATTN: AMSEL-LCL-EIE (Value Concepts Office)

6001 COMBAT DRIVE

ABERDEEN PROVING GROUND, MARYLAND 21005-1845

Phone: 443-861-5415

PACKAGING

Military packaging is applicable. Preservation, packing and marking for shipment shall be in accordance with Section ‘D’ of the contract. Packaging/packing shall be in accordance with MIL-STD-2073-1E Standard Practice for Military Packaging.

Packaging requirements for those items will be provided with the delivery order. Marking shall be in accordance with MIL- STD-129R. RFID Requirements shall be in accordance the Section ‘F’ clause, DFARS 252.211-7006, of the contract.

Wood Packaging Material (WPM).

Nonmanufactured soft and hard wood materials identified as intended for use in the construction of wooden pallets, wood containers, and blocking and bracing shall be heat treated (HT) to a core temperature of 56 degrees Centigrade for 30 minutes, certified, and marked by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in accordance with their Nonmanufactured Wood Packing Policy and Nonmanufactured Wood Packing Enforcement Regulations, both dated 30 May 2001.

New WPM: New WPM acquired by DoD Components to include contractors, shall be compliant with International Standards for Phytosanitary Measures (ISPM) Number 15, Regulation of Wood Packaging Material in International Trade (2009), United Nations (UN), Food and Agriculture Organization (FAO). Within the United States, the DoD Components and contractors shall also adhere to the American Lumber Standard Committee (ALSC) and the National Wood Pallet and Container Association (NWPCA), guidelines on “Pest Free” WPM. In overseas areas, DoD Components shall procure all WPM in compliance with host nation implementation of UN IPPC Phytosanitary standards, if such standards have been implemented.

Electro-Static Discharge Sensitive (ESDS): ESDS items shall be packaged in ESDS packaging (bags) per MIL-STD- 129R, to protect the electrical characteristics of the item in transit. Packaging (exterior, intermediate and unit, as required) shall have ESDS warning labeling, in accordance with figure 17, per paragraph 5.2.20 of MIL-STD-129R.

Attachment 0001 SPRBL1-18-R-0016 Page 5 of 9

Military Packaging DS7029 and/or DS7033 Preservation, Packing and Marking Instructions

DS7029 - DS7033 LEGEND

Qty Quantity Prot Req Protection Required PKG-REF Packaging Reference (Military/Federal Specification or Standard) SPI Special Packaging Instruction LPK Level of Packing QUP Quantity per Unit Pack ICQ Intermediate Container Quantity Pkg Reqmt Codes Packaging Requirement Codes when PKG-REF cites MIL-STD-2073 The below codes are for special markings:

PC Project Code WG Warranty/Guarantee SL Shelf Life BC Bar Code FMS Foreign Military Sales

Attachment 0001 SPRBL1-18-R-0016 Page 6 of 9

DS7029 - DS7033

NSN Prot Req PKG-REF or SPI LPK QUP ICQ Special Markings

Pkg J. J J J J J J J J J Reqmt I. II. III. IV. V. VI. VII. VII.a IX X Codes (MP) (CD) (PM) (WM) (CD) (CT) (UC) (IC) (PK) (SM) 6666-66-666-6666 Military MIL-STD-2073-1E B 001 - 41 1 00 00 NA C ED - - - BC

1234-56-789-0000 Military AG00000601 B 001 n/a n/a n/a n/a n/a n/a n/a n/a/ n/a n/a BC

Attachment 0001 SPRBL1-18-R-0016 Page 7 of 9

CONTRACT SECURITY

Any AT/OPSEC standard contract language and/or security language shall be approved by the G-2 Army Security Office prior to inclusion below.

CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

CDRL List CDRL Data Line No. DID Identification Title E001 DI-MISC-80711A Scientific and Technical Reports B001 DI-PSSS-81656B Diminishing Manufacturing Sources Material Shortages

Attachment 0001 SPRBL1-18-R-0016 Page 8 of 9

Individual CDRLs

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

6001 A TDP X TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

MULTIBAND AMPLIFIER ULTRALIFE CORPORATION

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

E001 Scientific and Technical Reports Configuration Management

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-MISC-80711A RDER-PRA-AB INSERT

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

SUBMISSION 14. DISTRIBUTION IN

LT ASREQ SEE ITEM 16 b. COPIES

SECT. B

8. APP CODE N/A 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Draft Final

SEE ITEM 16

Reg

Repro

16. REMARKS: Data Item Description DI-MISC-80711A: Delete block 10 instructions entirely and follow instructions in on page 4- (Parts revisions) per CDRL DI-MISC-80711A.

The contractor shall prepare and submit CCDs for Government review in accordance with this document for Parts Revisions (page 4) when there is a Major change (See page 4) to or departure from a contractual baseline.

All Parts Control Documents for Major changes shall be submitted for Government review or notification.

Data shall be submitted and exchanged electronically in Microsoft Office 2003 or better suite of applications (MS Word, Excel, Power Point, Access, and Project). Alternate formats may be allowed subject to Government review and approval.

If the CDRL Data Deliverable is priced and is not NSP (Not Separately Priced), then an electronic DD Form 250 will be required via the Wide Area Workflow website in order for the contractor to receive payment for the data deliverable (see section G of the Contract). E-mail notification is required with any electronic submission.

RDER-PRA-AB

PCO

ACO

QAR

SPRBL1

15. TOTAL 0 5 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Robert Liang

RDER-PRA-AB

Mechanical Engineer

08/04/17 Tuan Pham

RDER-PRA-AB

Chief, Avionics Branch, PRD

08/04/17

DD FORM 1423

Attachment 0001 SPRBL1-18-R-0016 Page 9 of 9

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item) Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

6001 A TDP TM OTHER SESS

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

MULTIBAND AMPLIFIER ULTRALIFE CORPORATION

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

B001 Source Data For Forecasting Diminishing Manufacturing Sources and Material Shortages (DMSMS)

DMSMS Data

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-PSSS-81656B RDER-PRA-AB INSERT

7. DD 250 REQ 9.DIST STATEMENT REQUIRED 10. FREQUENCY 12. DATE OF FIRST

SUBMISSION 14. DISTRIBUTION IN

LT Annual SEE ITEM 16 b. COPIES

SECT. B

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Draft Final

SEE ITEM 16 SEE ITEM 16

Reg

Repro

16. REMARKS:

Item 12: Delivery of DMSMS Data shall be within TBD days after award of contract. Subsequent reports to be submitted semiannually (every 360 days) until conclusion of contract. Government has 60 days to review and determine acceptance.

See DI-SESS-81656 for DMSMS Data Format and Content requirements.

Data shall be submitted and exchanged electronically in Microsoft Office 2000 or later suite of applications (MS Word, Excel, Power Point, Access, and Project). Alternate formats may be allowed subject to Government review and approval.

If the CDRL Data Deliverable is priced and is not NSP (Not Separately Priced), then an electronic DD Form 250 will be required via the Wide Area Workflow website in order for the contractor to receive payment for the data deliverable (see section G of the Contract). E-mail notification is required with any electronic submission.

AMSEL-LC-LEO-E-IE

RDER-PRA-AB

SPRBL1

15. TOTAL 3 1

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

ROBERT LIANG

RDER-PRA-AB

Mechanical Engineer

08/04/2017 TUAN PHAM

RDER-PRA-AB

Chief, Avionics Branch

08/04/2017

DD FORM 1423