Attach_0001_Technical_Requirements_-_Parts.pdf

Attachment 0001 SPRBL1-16-R-0030 Page 1 of 7 Issue: 22 September 2015

TECHNICAL REQUIREMENTS

Spare Parts for Stormscope & AN/ARN-154 TACAN

Attachment 0001 SPRBL1-16-R-0030 Page 2 of 7

TABLE OF CONTENTS

APPLICABLE DOCUMENTS

CONFIGURATION BASELINE

Part Revisions

Obsolescence Reporting

Ozone Depleting Chemicals

Year 2000

Special Instructions

PACKAGING

Wood Packing Material

SPECIALIZED TESTING

CONTRACT SECURITY

CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

Individual CDRLs

DD FORM 1423

Attachment 0001 SPRBL1-16-R-0030 Page 3 of 7

APPLICABLE DOCUMENTS

Military and Federal Standards MIL-STD-129R Military Marking for Shipment & Storage MIL-STD-130 N(chg 1) Identification Marking of U.S. Military Property MIL-STD-2073-1 Standard Practice for Military Packaging

Military and Federal Specifications None

Other Documents None

Commercial Documents 012-11500-001 Final Unit Performance WX-500 Procedure Test 012-10207-001 Final Unit Performance WX-1000 & WX-1000+Procedure Test 009-10062-001 Installation & Testing of ARN-154 TACAN ASTM-D-3951-98 Standard Practice for Commercial Packaging ISPM 15 Regulation of Wood Packaging Material in International Trade (2009)

Security Documents None

CONFIGURATION BASELINE

The applicable Configuration Baseline (CB) for the listed Configuration Item (CI)/Computer Software Configuration Item (CSCI) is as follows:

NSN Nomenclature Part No. CAGE Company 5841-01-536-9302 WX-500 Processor 805-11500-001 25583 L-3 Comm Corp 5841-01-459-9517 WX-1000 Processor 78-8060-6092-3 “ “ 6660-01-328-1254 WX-1000+ with Indicator 78-8060-5900-8 “ “ 5826-01-581-8269 RT-1634(V)1 Receiver-Transmitter 805D0602-30 “ “ 5826-01-581-7230 F-6555 Radio Control 805D0663-05 “ “ 5826-01-582-4492 IN-602 Position Deviation Indicator 805C0620-15 “ “ 5985-01-534-1328 Antenna 805-10930-001 “ “ 5999-01-558-8478 Gasketing Material 78-8060-5977-6 “ “

Part Revisions The Government shall be notified of any changes in parts to manufacture these items (Configuration Control/Management) per CDRL DD Form 1423 for DI-MISC-80711A. The Government does not have to accept items that have configuration changes not approved by the procuring Government activity.

Obsolescence Reporting The contractor shall provide source data that will enable the identification, forecasting and management of piece part obsolescence impacts and mitigations. The DMSMS data shall be provided in accordance with the CDRL (DD Form 1423) for DI-SESS-81656.

Attachment 0001 SPRBL1-16-R-0030 Page 4 of 7

Ozone Depleting Chemicals There are no Ozone Depleting Chemicals used in these items.

Year 2000 Year 2000 (Y2K) does not affect any of these items.

Special Instructions

IUID: All items shall have an IUID assigned and marked in a conspicuous area of the item so as to not interfere with usage. IUID shall be IAW DFARS 252.211-7003 Item Unique Identification and Valuation.

IUID shall include but not limited to NSN, Serial Number, part number and nomenclature. Marking shall be permanent Human Readable characters per MIL-STD-130N with change 1.

Electro-Static Discharge Labels: All items shall have an ESDS caution note and symbol per MIL-STD-130N with change 1 paragraph 5.9 on the item as required. The caution note and symbol shall be in a location readily visible to personnel that does not interfere with the normal operation of the item or obstruct any other markings as required by MIL- STD-130N with change 1 and the procurement contract.

Electro-Static Discharge Sensitive (ESDS) Warranty Items. All ESDS warranty items returned for repair shall insure that the ESDS caution note and symbol per MIL-STD-130N with change 1 paragraph 5.9 on the item are still legible after repair as required. The caution note and symbol shall be in a location readily visible to personnel that does not interfere with the normal operation of the item or obstruct any other markings as required by MIL-STD-130N with change 1 and the procurement contract.

PACKAGING

Preservation, packing and marking for shipment shall be in accordance with Sections B, D, and J of the contract.

Packaging/packing shall be in accordance with ASTM D 3951-98, Standard Practice for Commercial Packaging, Level of Protection (LOP): Commercial, Level of Pack (LPK): Commercial, Quantity Unit Pack (QUP):001. Marking shall be in accordance with MIL-STD-129R. RFID Requirements shall be in accordance the Section ‘F’ clause, DFARS 252.211- 7006, of the contract.

NSN Prot Req Packaging Standard

5841-01-536-9302 Commercial ASTM D 39551-98 5841-01-459-9517 Commercial ASTM D 39551-98 6660-01-328-1254 Commercial ASTM D39551-98 5826-01-581-8269 Commercial ASTM D39551-98 5826-01-581-7230 Commercial ASTM D39551-98 5826-01-582-4492 Commercial ASTM D39551-98 5985-01-534-1328 Commercial ASTM D39551-98 5999-01-558-8478 Commercial ASTM D39551-98

Wood Packing Material

Wood Packaging Material (WPM) shall meet the requirements below and DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM).

Nonmanufactured soft and hard wood materials identified as intended for use in the construction of wooden pallets, wood containers, and blocking and bracing shall be heat treated (HT) to a core temperature of 56 degrees Centigrade for 30 minutes, certified, and marked by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in accordance with their Nonmanufactured Wood Packing Policy and Nonmanufactured Wood Packing Enforcement Regulations, both dated 30 May 2001.

Attachment 0001 SPRBL1-16-R-0030 Page 5 of 7

New WPM: New WPM acquired by DoD Components to include contractors, shall be compliant with International Standards for Phytosanitary Measures (ISPM) Number 15, Regulation of Wood Packaging Material in International Trade (2009), United Nations (UN), Food and Agriculture Organization (FAO). Within the United States, the DoD Components and contractors shall also adhere to the American Lumber Standard Committee (ALSC) and the National Wood Pallet and Container Association (NWPCA), guidelines on “Pest Free” WPM. In overseas areas, DoD Components shall procure all WPM in compliance with host nation implementation of UN IPPC Phytosanitary standards, if such standards have been implemented.

Electro-Static Discharge Sensitive (ESDS): ESDS items shall be packaged in ESDS packaging (bags) per MIL-STD- 129R, to protect the electrical characteristics of the item in transit. Packaging (exterior, intermediate and unit, as required) shall have ESDS warning labeling, in accordance with figure 17, per paragraph 5.2.20 of MIL-STD-129R.

SPECIALIZED TESTING

WX-500 Storm Scope acceptance testing shall be in accordance with 012-11500-001; dated November 30, 2004, (Revision V). Refer also to the Performanc Work Statement.

WX-1000 & WX-1000+ Storm Scopes acceptance testing shall be in accordance with 012-10207-001; dated May 14, 2003, (Revision T). Refer to the Performance Work Statement.

RT-1634(V)1 Receiver-Transmitter, F-6555 Control Radio Set and IN-602 Position Indicator acceptance testing shall be in accordance with 009-10062-001; dated November 22, 2011, (Revision K). Refer also to the Performanc Work Statement.

CONTRACT SECURITY

Any AT/OPSEC standard contract language and/or security language shall be approved by the G-2 Army Security Office prior to inclusion below.

CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

Individual CDRLs NOTE: Source Data For Forecasting Diminishing Manufacturing Sources and Material Shortages (DMSMS) CDRL only applies to the Stormscopes items.

Individual CDRLs start on the next page.

Attachment 0001 SPRBL1-16-R-0030 Page 6 of 7

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER SESS

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

WX-500, WX-1000 & WX-1000+

Storm Scopes L3 Communications Corp

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A001 Source Data For Forecasting Diminishing Manufacturing Sources and Material Shortages (DMSMS)

DMSMS Data

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-SESS-81656 Page 4 RDER-PRA-AB INSERT

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

SUBMISSION 14. DISTRIBUTION IN

LT Semiannual SEE ITEM 16 b. COPIES

SECT. B

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Draft Final

SEE ITEM 16 SEE ITEM 16 ^

Reg

Repro

16. REMARKS:

Item 12: Delivery of DMSMS Data shall be within TBD days after award of contract. Subsequent reports to be submitted semiannually (every 180 days) until conclusion of contract. Government has 60 days to review and determine acceptance.

See DI-SESS-81656 for DMSMS Data Format and Content requirements.

Data shall be submitted and exchanged electronically in Microsoft Office 2000 or Office XP suite of applications (MS Word, Excel, Power Point, Access, and Project). Alternate formats may be allowed subject to Government review and approval.

If the CDRL Data Deliverable is priced and is not NSP (Not Separately Priced), then an electronic DD Form 250 will be required via the Wide Area Workflow website in order for the contractor to receive payment for the data deliverable (see section G of the Contract). E-mail notification is required with any electronic submission.

AMSEL-LC-SNC

AMSEL-LC-LEO-E-IE

RDER-PRA-AB

SPRBL1

15. TOTAL 3 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

ROBERT LIANG

RDER-PRA-AB

Mechanical Engineer

4 September

Michael Heussner

RDER-PRA-AB

Chief, Avionics Branch

4 September 2015

DD FORM 1423

Attachment 0001 SPRBL1-16-R-0030 Page 7 of 7

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item) Original Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information

Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP X TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

Storm Scopes WX-500, WX-1000 & WX-1000+

TACAN ARN-154

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A002 Scientific and Technical Reports Configuration Management

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-MISC-80711A Page 4 AMSEL-LCE-SNC INSERT

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

SUBMISSION 14. DISTRIBUTION IN

LT ASREQ SEE ITEM 16 b. COPIES

SECT. B

8. APP CODE N/A 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Draft Final

SEE ITEM 16

Reg

Repro

16. REMARKS: Data Item Description DI-MISC-80711A: Delete block 10 instructions entirely and follow instructions in on page 4- (Parts revisions) per CDRL DI-MISC-80711A.

The contractor shall prepare and submit CCDs for Government review in accordance with this document for Parts Revisions (page 4) when there is a Major change (See page 4) to or departure from a contractual baseline.

All Parts Control Documents for Major changes shall be submitted for Government review or notification.

Data shall be submitted and exchanged electronically in Microsoft Office 2000 or Office XP suite of applications (MS Word, Excel, Power Point, Access, and Project). Alternate formats may be allowed subject to Government review and approval.

If the CDRL Data Deliverable is priced and is not NSP (Not Separately Priced), then an electronic DD Form 250 will be required via the Wide Area Workflow website in order for the contractor to receive payment for the data deliverable (see section G of the Contract). E-mail notification is required with any electronic submission.

AMSEL-LCE-SNC

PCO

ACO

QAR

.RDER-PRA-AB

SPRBL1

15. TOTAL 0 5 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

ROBERT LIANG

RDER-PRA-AB

Mechanical Engineer

4 September 2015 Michael Heussner

RDER-PRA-AB

Chief, Avionics Branch

4 September 2015

DD FORM 1423