SPMYM4-27-Q-3088.pdf
PDF 2 MB Posted
- Attached to
- SCREW, CAP
- Solicitation number
- SPMYM427Q3088
About this file
This document is a Request for Quote (RFQ) for the procurement of various cap screws issued by the Defense Logistics Agency (DLA) Maritime at Pearl Harbor.
The solicitation (SPMYM427Q3088) seeks six line items of socket head cap screws with specific technical requirements, including self-locking elements, material specifications (nickel-copper-aluminum alloy where applicable), and markings in accordance with military standards. Required quantities include 16 each for CLIN 0001, 72 each for CLIN 0003, 60 each for CLIN 0005, with accompanying certification requirements (2 each) for CLINs 0002, 0004, and 0006. The solicitation is set aside 100 percent for small business concerns. The offer due date is November 23, 2026, at 12:00 PM Hawaii time. Delivery is required to Pearl Harbor Naval Shipyard IMF at 667 Safeguard Street, Pearl Harbor, Hawaii 96860-5033, with material classified as QA-2 quality and a 30-day acceptance timeframe. Award will be made to the responsible offeror whose offer is technically acceptable and lowest priced, evaluated on technical capability, price, and delivery factors. Offerors must provide supply chain traceability documentation, Traceable Objective Quality Evidence (OQE) certifications with actual test results, and certificates of compliance. Payment will be made via Wide Area Workflow (WAWF), and contractors must register in the System for Award Management (SAM) prior to award. Special requirements include compliance with K-Monel heat review restrictions, mercury-free procurement certification, and adherence to material specifications including FF-S-86J for socket head cap screws and QQ-N-286G for nickel-copper-aluminum alloy materials.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WOMEN-OWNED SMALL
BUSINESS (WOSB)
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES
1. REQUISITION NUMBER PAGE 1 OF
2. CONTRACT NUMBER 3. AWARD/EFFECTIVE
DATE
4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE
DATE
7. FOR SOLICITATION
INFORMATION CALL:
a. NAME b. TELEPHONE NUMBER (No collect calls)
8. OFFER DUE DATE/
LOCAL TIME
9. ISSUED BY
13b. RATING
14. METHOD OF SOLICITATION
CODE
15. DELIVER TO 16. ADMINISTERED BY CODE
18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/
OFFEROR
CODE
FACILITY
CODE
CODE
TELEPHONE NUMBER
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN
OFFER
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK
BELOW IS CHECKED
REQUEST
FOR QUOTE
(RFQ)
INVITATION
FOR BID
(IFB)
REQUEST
FOR
PROPOSAL
(RFP)
SEE ADDENDUM
19.
ITEM NUMBER
20.
SCHEDULE OF SUPPLIES/SERVICES
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
AMOUNT
(Use Reverse and/or Attach Additional Sheets as Necessary)
25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH
AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND
ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS
SPECIFIED
29. AWARD OF CONTRACT: REFERENCE OFFER
DATED . . YOUR OFFER ON SOLICITATION
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR
30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED
31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
STANDARD FORM 1449 (REV. 11/2021)
Prescribed by GSA - FAR (48 CFR) 53.212
10. THIS ACQUISITION IS UNRESTRICTED OR
NORTH AMERICAN
INDUSTRY CLASSIFICATION
STANDARD (NAICS):
SIZE STANDARD:
13a. THIS CONTRACT IS A
RATED ORDER UNDER
THE DEFENSE PRIORITIES
AND ALLOCATIONS
SYSTEM - DPAS (15 CFR 700)
SET ASIDE: % FOR:
11. DELIVERY FOR FREE ON
BOARD (FOB) DESTINATION
UNLESS BLOCK IS MARKED
SEE SCHEDULE
12. DISCOUNT TERMS
ARE ARE NOT ATTACHED
ARE ARE NOT ATTACHED
27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3
AND 52.212-5 ARE ATTACHED. ADDENDA
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA
8(A)
ECONOMICALLY
DISADVANTAGED
WOMEN-OWNED SMALL
BUSINESS (EDWOSB)
SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
(SDVOSB)
HUBZONE SMALL
BUSINESS
SMALL BUSINESS
NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.
Section A - Solicitation/Contract Form
SCREW, CAP
SPMYM427Q3088
Section B - Supplies or Services & Prices or Costs
Additional Information/Notes
Item Supplies/Service Quantity Unit Unit Price Amount
SCREW,CAP,SOCKET HE
FLAT 82 DEGREE COUNTERSUNK SOCKET HEADS; SELF-
LOCKING; 5/8"-11 UNC-3A X 2-1/2" LONG; FF-S-86J, TYPE IV;
NICU, QQ-N-281D, AMENDMENT 2, CLASS A; SELF LOCKING
IAW MIL-DTL-18240F, AMENDMENT 1, TYPE "N";
ORDERING DATA:
A) SCREW, CAP, SOCKET-HEAD, FF-S-86J DTD 1APRIL2025. B)
TYPE IV; 5/8"-11 UNC-3A X 2-1/2" LONG;
C) N/A. D) CHEMICAL ANALYSIS AND MECHANICAL
PROPERTY TESTS REQUIRED;
E) N/A; F) N/A; G) 11 UNC-3A; H) NOT REQUIRED. I) AND J) N
/A. K) AS SPECIFIED IN PARA 4.2.5
L) AS SPECIFIED IN PARA 4.2.7
ADDITIONAL REQUIREMENTS:
SELF-LOCKING ELEMENT IAW MIL-DTL-18240F DTD 02JUN97
W/AMD-1 DTD 13MAR00, TYPE N, GOV'T DESIGNATION 100
IAW TABLE I OF MIL-DTL-18240F. QPL-18240-QPD LATEST
APPLIES AND IS AVAILABLE THROUGH ASSIST OR
HAYSTACK.
2) MARKING MIN OF SIX (6) DOTS (APPROX. 0.032 DIA)
RAISED OR DEPRESSED (APPROX .010) SHALL BE PLACED
ON HD OF FSTNR (TOP PREFERRED);
Internal Number: ERH513-1302A 119-2 Pricing Arrangement: Firm Fixed Price
16 Each
CONTROLLED INDUSTRIAL MATERIAL (CIM) REQUIREMENT
FOR CLIN 0001
CERTIFICATION IS REQUIRED AS SPECIFIED IN TRACEABLE
OBJECTIVE QUALITY EVIDENCE (OQE), SEE ADDITIONAL
CIM REQUIREMENTS.
2 COPIES OF CERTIFICATION IS REQUIRED
Internal Number: 000 Pricing Arrangement: Firm Fixed Price
2 Each
SCREW,CAP,FLH,SKT
SCREW, CAP, SOCKET HEAD FLAT HEAD; SELF LOCKING;
NICUAL; 0.625"-11 UNRC-3A X 2.500" LONG; FF-S-86J, TYPE
IV; MIL-DTL-18240F; QQ-N-286G, DATED 07DEC2000
ORDERING DATA: A) SCREW, CAP, SOCKET-HEAD, FF-S-86J
DTD 01APR2025. B) TYPE IV, NICUAL IAW QQ-N-286G, 0.625"
-11UNRC-3A X 2.500" LONG. C) N/A. D) MATERIAL
CERTIFICATION IS REQUIRED. E) & F) NOT REQUIRED. G)
11UNRC-3A. H -L) N/A.
ADDITIONAL REQUIREMENTS:
1) SELF LOCKING (TYPE N, PLUG/PELLET) IAW MIL-DTL-
18240F DTD 02JUN1997 W/AMD-1 DTD 13MAR2000,
GOVERNMENT DESIGNATION 100 IAW TABLE 1 OF MIL-DTL-
18240F, QPL-18240-QPD DTD 20MAR2025 APPLIES AND IS
AVAILABLE THROUGH ASSIST.
2) VENDOR ACKNOWLEDGEMENT OF K-MONEL HEAT
REVIEW IS REQUIRED (SEE ATTACHED).
3) MARKINGS OF A MINIMUM (6) DOTS (APPROX. 0.032 DIA}
RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED
ON THE HEAD OF THE FASTENER {TOP PREFERRED, SIDE
LOCATION IF NECESSARY).
4) K-MONEL SOCKET HEAD CAP SCREWS MANUFACTURED
TO FF-S-86 MUST BE MANUFACTURED IAW FF-S-86G DTD
72 Each
27JAN2021, OR LATER REVISION, AND PROCURED IAW THE
K-MONEL SUPPLEMENTAL PROCESSING REQUIREMENTS.
ALL
K-MONEL SOCKET HEAD CAP SCREWS MANUFACTURED TO
FF-S-86 MUST HAVE THE "-K-" MATERIAL MARKING.
Internal Number: 68-15-5250A Pricing Arrangement: Firm Fixed Price
CONTROLLED INDUSTRIAL MATERIAL (CIM) REQUIREMENT
FOR CLIN 0003
CERTIFICATION IS REQUIRED AS SPECIFIED IN TRACEABLE
OBJECTIVE QUALITY EVIDENCE (OQE), SEE ADDITIONAL
CIM REQUIREMENTS.
2 COPIES OF CERTIFICATION IS REQUIRED
Internal Number: 000 Pricing Arrangement: Firm Fixed Price
2 Each
SCREW, CAP SCH FLH
SCREW, CAP; SOCKET HEAD FLAT HEAD; FF-S-86J, TYPE IV;
QQ-N-286G, DATED 07DEC2000.
NICUAL; 0.500"-13UNRC-3A X 1.500" LONG
ORDERING DATA:
A) SCREW, CAP, SOCKET- HEAD, FEDERAL SPEC FOR FF-S-
86J DTD 01APR2025; B) TYPE IV, NICUAL, 0.500"-13UNRC-3A
X 1.5"
C) N/A. D) CHEMICAL ANALYSIS AND MECHANICAL
PROPERTIES TEST REPORTS REQUIRED AND IAW PARA 3.1
AND 4.3.4 E) THRU F) NOT REQUIRED. G) 13UNRC-3A. H) NOT
REQUIRED. I) AND J) N/A. K) AS SPECIFIED IN PARA 4.2.5
L) AS SPECIFIED IN PARA 4.2.7
ADDITIONAL REQUIREMENTS:
1) VENDOR ACKNOWLEDGEMENT OF K-MONEL HEAT
REVIEW REQUIREMENTS IAW ATTACHED.
2) K-MONEL SOCKET HEAD CAP SCREWS MANUFACTURED
TO FF-S-86 MUST BE MANUFACTURED IAW FF-S-86G OF
27JAN2021, OR LATER VERSION, AND PROCURED IAW THE K-
MONEL SUPPLEMENTAL PROCESSING REQUIREMENTS. ALL
K-MONEL SOCKET HEAD CAP SCREWS MANUFACTURED TO
FF-S-86 MUST HAVE THE "K" (DOT-K-DOT) MATERIAL
MARKING.
Internal Number: 68-14-4150 Pricing Arrangement: Firm Fixed Price
60 Each
CONTROLLED INDUSTRIAL MATERIAL (CIM) REQUIREMENT
FOR CLIN 0005
CERTIFICATION IS REQUIRED AS SPECIFIED IN TRACEABLE
OBJECTIVE QUALITY EVIDENCE (OQE), SEE ADDITIONAL
CIM REQUIREMENTS.
2 COPIES OF CERTIFICATION IS REQUIRED
Internal Number: 000 Pricing Arrangement: Firm Fixed Price
2 Each
Section C - Description/Specifications/Statement of Work
Requirements
SCREW, CAP
Additional Regulation or Supplemental Clauses Incorporated by Full Text
DLAD C04 DLAD PROC NOTE C04 (Oct 2025)
C04 Unused Former Government Surplus Property (SEP 2021) To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.
(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [__] No [__] The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [__] No __ The material conforms to the revision letter/number, if any is cited. Yes [__] No [__] Unknown __ If No, the revision does not affect form, fit, function, or interface. Yes__ No __ Unknown __ The material was manufactured by:
(Name): ______________________________________________________________________ (Address): ___________________________________________________________________
(2) The offeror currently possesses the material Yes __ No __ If yes, the offeror purchased the material from a Government selling agency or other source.
Yes __ No __ If yes, complete the following:
Government Selling Agency: ___________________________________________________ Contract Number: ____________________________________________________________ Contract Date: (Month, Year): __________________________________________________ Other Source: ________________________________________________________________ Address: ____________________________________________________________________ Date Acquired: (Month/Year) ___________________________________________________ (3) The material has been altered or modified. Yes __ No __ If Yes, complete the following:
Name of the company that performed the alternation or modification:
[(Address): __________________________________________________________________ Complete description of the alterations or modifications.
____________________________________________________________________________ (4) The material has been reconditioned. Yes __ No __ If Yes, complete the following:
(i) The price offered includes the cost of reconditioning /refurbishment. Yes __ No __ (ii) Name of the company that reconditioned the material.
(iii) Description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.
____________________________________________________________________________ The material contains cure-dated components. Yes __ No __ If Yes, complete the following:
(i) The price includes replacement of cure-dated components. Yes __ No __
(ii) Cure date: ____________________
(5) The material has data plates attached. Yes __ No __ If Yes, insert all information contained on the data plate.
(6) The offered material is in its original package. Yes __ No __ If yes, complete the following:
Contract Number ______________________________________________________________
NSN_________________________________________________________________________
CAGE Code__________________________________________________________________ Part Number __________________________________________________________________ Other Markings/Data___________________________________________________________
(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes __ No __ If Yes, complete the following:
(i) The material being offered is from the same original Government contract number as that provided previously. Yes __ No __
(ii) State below the Government Agency and contract number under which the material was previously provided:
Agency ______________________________________________________________________ Contract Number_______________________________________________________________
(8) The material is manufactured in accordance with a specification or drawing. Yes __ No __ If Yes, complete the following:
(i) The specification/drawing is in the possession of the offeror. Yes __ No __
(ii) The offeror has stated the applicable information below: Yes __ No __ Specification/Drawing Number ___________________________________________________ Revision (if any) _______________________________________________________________ Date__________________________________________________________________________
(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes __ No __ If Yes, complete the following:
(i) Material has been re-preserved. Yes __ No __
(ii) Material has been repackaged. Yes __ No __
(iii) Percentage of material that has been inspected is ____%; and/or
(iv) Number of items inspected is _______
(v) A written report was prepared. Yes __ No __ The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.
The offeror will forward one of the following, within 24 hours of request by the contracting officer, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):
___ For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.
___ For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.
___ When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (6) of this procurement note Yes __ No __) ___ When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government.
Describe:
This procurement note only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.
If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government.
All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.
In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order.
The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.
C7F769 ADDITIONAL CIM REQUIREMENTS (Oct 2025)
ADDITIONAL CIM REQUIREMENTS (CIM 2012-1)
1. All certifications are required to be delivered with the material. Payment on material for which certifications are not received will be withheld.
2. Material markings shall comply with the requirements and limitations set forth in MIL-STD-792 (latest).
3. All nickel-copper-aluminum alloy (K-500) raw stock, and K-500 raw stock used in the manufacture of finished products, shall be procured to QQ- N-286 Revision G with slow strain rate tests done by the following approved laboratories:
a. Huntington Alloys, a Special Metals Company
3200 Riverside Drive
Huntington, WV 25705
b. Metallurgical Consultants, Inc.
4820 Caroline
PO Box 88046
Houston, TX 77288-0046
c. Naval Surface Warfare Center, Caderock Division
Code 614
9500 Macarthur Blvd
West Bethesda, MD 20817-5700
d. Teledyne Allvac
2020 Ashcraft Ave.
Monroe, NC 28110
e. Mannesmann Rohrenwerke
Mannesmann Forschungsinstitut (MFI)
Postfach 251160
47251 Duisburg
Germany
f. Westmoreland Mechanical Testing and Research Inc.
P.O. Box 388
Youngstown, PA 15696-0388
g. ThyssenKrupp VDM USA, Inc.
11210 Steeplecrest Drive, Suite 120
Houston, TX 77065-4939
4. Vendor acknowledgement of K-Monel heat review.
a. Recent investigations into mechanical property failures of fasteners manufactured from NiCuAl(K-Monel) material that was produced by Special Metals Corporation (formerly INCO Alloys) of Huntington, West Virginia have found eighty (80) heats of material which may not meet the mechanical property requirements of QQ-N-286 throughout the heat. In 1994, Special Metals Corporation implemented a process change that eliminated the addition of extra aluminum at the toe of each NiCuAl(K-Monel) ingot resulting in the toe portion of the heat being non-homogeneous in comparison to the rest of the heat. Due to cropping practices at Special Metals Corporation, material from the toe of the ingot with non-homogeneous aluminum content was not cropped from production material prior to shipment. A recent study has shown that the aluminum concentration in the toe portion of the ingot could be as low as approximately 2.0% with a corresponding yield strength as low as approximately 40,000 PSI. QQ-N-286 specifies an aluminum content of 2.3% minimum and a yield strength of 90,000 PSI minimum or 85,000 PSI minimum for material 1". As a result of the investigation, the eighty (80) heats listed in Table I are considered suspect of having problems with insufficient aluminum content and an inability to consistently attain the required minimum yield strength.
b. You are requested to review your records of in stock and in process K-Monel material from the Special Metals Corporation for the suspect heat numbers listed in Table I below. You are prohibited from providing raw stock or finished products made from the suspect K-Monel heats. If suspect heats are intended to be used, contact the PHNS & IMF contracting officer for adjudication of the material. Table I - List of Suspect Special Metals Corporation K-Monel Heat Numbers
M00J6KG M00J7KG M01J1KG M02J8KG
M02J9KG M03J8KG M04J2KG M04J6KG
M04J7KG M06J5KG M06J8KG M11J2KG
M11J3KG M11J4KG M11J5KG M15J6KG
M17J2KG M17J3KG M17J4KG M18J7KG
M19J7KG M21J2KG M22J7KG M22J8KG
M23J2KG M24J5KG M26J8KG M26J9KG
M27J9KG M28J4KG M30J9KG M31J9KG
M33J7KG M34H4KG M35H0KG M35J0KG
M35J7KG M35H8KG M36H7KG M36J2KG
M36J3KG M37J4KG M39J3KG M41J1KG
M41J2KG M41H3KG M41J3KG M41J7KG
M41J8KG M44J4KG M44J6KG M45J2KG
M45J8KG M45J9KG M46J7KG M52H9KG
M61J8KG M61J9KG M62J5KG M64J4KG
M64J5KG M64J6KG M67H2KG M67J4KG
M69J1KG M70J6KG M73J4KG M76H6KG
M80H2KG M80H3KG M84H9KG M85H0KG
M88H6KG M88H7KG M89H5KG M89H6KG
M92H0KG M95H7KG M97H8KG M99H3KG
DLAD C03 DLAD PROC NOTE C03 (Oct 2025)
C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)
(1) By submitting a quotation or offer, the contractor is confirming it currently has, or will obtain before delivery, and shall retain supply chain traceability documentation, as described in paragraph (2) of this procurement note, demonstrating the item conforms to the technical requirements, and, for part numbered items, is from an approved manufacturer. (2) Supply Chain Traceability Documentation
(i) Supply chain traceability documentation shall include basic item description; part number; drawing or specification; national stock number;
manufacturing source; manufacturing source's Commercial and Government Entity (CAGE) code; and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to Government acceptance.
(ii) Supply chain traceability documentation shall also include, when available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.
For part numbered items, contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) website (http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection- AvoidanceProgram/).
(iii) In addition, the contractor will obtain, retain, and provide to the contracting officer written documentation of all inspections and tests necessary to substantiate that the supplies furnished under this contract conform to contract requirements, including any applicable technical requirements for specified manufacturers' parts. Such records shall include, without limitation, test reports, test data, material certification, and manufacturing process sheets, in addition to any other information identified in the technical specifications applicable to the item.
(3) The contractor shall make supply chain traceability documentation available to the contracting officer within three business days upon the contracting officer's request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for ten years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.
C7F765 TRACEABLE OBJECTIVE QUALITY EVIDENCE (OQE) (Oct 2025)
TRACEABLE OBJECTIVE QUALITY EVIDENCE (OQE) (CIM 2024)
(a) Traceable Objective Quality Evidence OQE shows actual test results for chemical and mechanical properties in conformance to the material specification required.
(b) The material specification along with revision and amendment must be cited on the OQE.
(c) A Certificate of Compliance (COC), which is a signed document attesting the items delivered on the contract are in full compliance with all contract requirements, must be provided.
(d) Traceability must be provided via a unique heat, lot number and code permanently marked on the material per MIL-STD-792 and shown on the OQE certification document.
(e) Where the applicable product specification does not require permanent heat or lot markings, the material must be tagged or received in a package, envelope, bag or box that is annotated with the heat, lot number and code that is traceable to the OQE certification document.
NAVSIPYD&IMFPEARLINST 4855.17 CH-1 DAT AUG 12, 2024
DLAD C01 DLAD PROC NOTE C01 (Oct 2025)
C01 Superseded Part Numbered Items (FEB 2025) When the award identifies supplies by manufacturer's name, Commercial and Government Entity (CAGE) code, and part number, the specified item(s) are the only item(s) acceptable under this contract. If an item part number is superseded during the term of this contract, the contractor shall advise the contracting officer immediately upon determination. The notice shall include complete information on the superseding item form, fit, function, configuration, application, or physical nature. The contracting officer will determine whether the item is acceptable to the Government, advise the contractor within seven days, and modify the contract accordingly.
DLAD C08 DLAD PROC NOTE C08 (Oct 2025)
C08 Tailored Logistics Support Purchasing Reviews (FEB 2017)
(1) From the commencement of performance of this contract until 3 years after the final contract payment, the contractor must allow the contracting officer, ACO, Defense Contract Management Agency (DCMA), Defense Contract Audit Agency (DCAA), and any other duly authorized representative of the contracting officer access to all records and information pertaining to those items or services for which the Government is relying on the contractor's purchasing system to determine that competition was obtained or to justify that prices are fair and reasonable. The contractor must maintain records subject to this clause for not less than 3 years after the contract final payment.
(2) The contracting officer may conduct reviews of purchased items or services provided under this contract regardless of dollar value that meet the criteria in paragraph (1) to ascertain whether the contractor has obtained the best value. The contractor must obtain competition to the maximum extent practicable for all purchases. Prior to purchasing any supplies or services, the contractor must solicit a competitive quotation from at least two independently-competing firms. For other than sole source items, the request for quotations must, to the maximum extent practical, solicit offers from different manufacturers or producers. If the contractor is unable to obtain quotes for competing items from two or more independently-competing firms, the contractor must retain documentation supporting its rationale for selection of the suppliers solicited and selected and its determination that the price was fair and reasonable. The contractor is responsible for maintaining this documentation for all sole source/non-competitive actions. The following price reasonableness and documentation requirements are applicable to all purchases, regardless of dollar value: (i) A price is reasonable if it does not exceed a price incurred by a prudent person in the conduct of competitive business. The contracting officer will examine the prices with particular care in connection with buys that may not be subject to effective competition restraints. The contractor's price will not be presumed to be reasonable. If an initial review of the facts results in a challenge of a specific price by the contracting officer or the contracting officer's representative, the burden of proof must be upon the contractor to establish that the price is reasonable under the standards in FAR Subpart 15.4 and FAR 31.201-3.
(ii) The contractor must keep the documentation to a minimum, but must retain data supporting the purchases either by paper or electronically. At a minimum, price quotations and invoices must be retained. Should the contractor receive an oral price quotation, the contractor must document who the supplier or subcontractor is by complete name, address, telephone number, price, terms and other conditions quoted by each vendor. Price quotes for supplies must be broken down by individual items, shipping costs, and any other included expenses. Price quotes for incidental services which are not pre- priced in the contract must include labor hours and costs or prices, as applicable, including the total price of the job, individual pricing for the portions of the work if applicable, materials, and all other elements of cost, overhead, and profit. This price breakdown documentation must be made for each subcontractor performing work on this contract.
(3) When applicable, if the contractor is purchasing from subcontractors or other sources and receives a discount or rebates, the contractor must immediately pass these savings to the Government in the contract price and invoice for payment. The contractor is required to use diligence in the selection of the most economical method of delivery of the product or services by selecting a best value method of delivery based on the urgency and nature of the work or product required. When labor hours are involved in the work to be accomplished and the contractor has not already pre-priced the effort to use its own labor force, the contractor must provide the labor at rates required by the contract (for example, Service Contract Act or Davis-Bacon Act rates) or at rates based on competition if mandatory rates are not required by the contract.
(4) If the contracting officer determines that the purchased product or service is unreasonably priced, the contractor must refund to the Government the amount the contracting officer determines is in excess of a reasonable price. The contracting officer must notify the contractor in writing in accordance with FAR 32.604 Demand for Payment, giving the basis for the determination and the amount to be refunded. The contractor must make the refund payment in accordance with directions from the contracting officer, and must provide proof of the refund payment to the contracting officer. The contracting officer may collect the amount due using all available means in accordance with FAR Subpart 32.6. FAR 52.232-17, Interest, is applicable to payments not made within 30 days of the demand for payment. Any disputes arising under this provision must be handled in accordance with the "Disputes" clause of this contract.
DLAD C14 DLAD PROC NOTE C14 (Oct 2025)
C14 Correction of Nonconforming Packaging or Marking (MAY 2020).
(1) The Government may correct nonconforming packaging or marking for receipts of DLA- owned materiel if the estimated costs of correction are $1,000 or less. The contracting officer will advise the contractor of the discrepancy and that the Government has corrected the packaging or marking.
The contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government's costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.
(2) If the estimated costs of correction for receipts of DLA-owned materiel are more than $1,000, the contracting officer will advise the contractor of the discrepancy and have the materiel returned to the contractor for correction/resubmittal; or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor's expense. If the Government remediates the discrepancy, the contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government's costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies. *****
DLAD C02 DLAD PROC NOTE C02 (Oct 2025)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.
In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.
C7F758 MERCURY EXCLUSION CLAUSE FOR MERCURY FREE PROCUREMENT (Oct 2025)
MERCURY EXCLUSION CLAUSE FOR MERCURY FREE PROCUREMENT (LC-2, JAN 2013)
1. Mercury or mercury compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract.
Supplier shall certify that all items furnished under this contract are free of mercury or mercury compounds.
Section D - Packaging and Marking
Section E - Inspection and Acceptance
Additional Regulation or Supplemental Clauses Incorporated by Full Text
DLAD E01 DLAD PROC NOTE E01 (Oct 2025)
E01 Supplemental First Article Exhibit Disposition - Contractor Maintained (MAY 2020) The Government will return approved first article units to the contractor. The contractor shall hold the approved first article units at the production facility until it has produced and the Government has accepted all production quantities. In the case of indefinite delivery contracts, the contractor shall hold the first article units until the Government has approved the final production run and accepted the first delivery order. The units shall serve as a production guide or manufacturing standard if the Government receives reports of defects on delivered material or problems encountered during production. When disposing of the first article units, the contractor shall follow DFARS 252.245-7004(d).
E7F754 CERTIFICATIONS REQUIRED WITH DELIVERY OF MATERIAL (Oct 2025)
CERTIFICATIONS REQUIRED WITH DELIVERY OF MATERIAL (CIM 2012-1)
All certifications are required to be delivered with the material. Payment on material for which certifications are not received will be withheld.
Overall Contract Inspection/Acceptance Locations
Inspection and Acceptance Location
Both Destination Instructions: Material is a QA-2 and has a 30-days acceptance timeframe.
DoDAAC: N32253 CountryCode: USA
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033
PEARL HARBOR, HI 96860-5033
UNITED STATES
Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil
Inspection and Acceptance Location
Both Destination Instructions: Material is a QA-2 and has a 30-days acceptance timeframe.
DoDAAC: N32253 CountryCode: USA
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033
PEARL HARBOR, HI 96860-5033
UNITED STATES
Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil
Inspection and Acceptance Location
Both Destination Instructions: Material is a QA-2 and has a 30-days acceptance timeframe.
DoDAAC: N32253
CountryCode: USA
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033
PEARL HARBOR, HI 96860-5033
UNITED STATES
Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil
Inspection and Acceptance Location
Both Destination Instructions: Material is a QA-2 and has a 30-days acceptance timeframe.
DoDAAC: N32253 CountryCode: USA
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033
PEARL HARBOR, HI 96860-5033
UNITED STATES
Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil
Inspection and Acceptance Location
Both Destination Instructions: Material is a QA-2 and has a 30-days acceptance timeframe.
DoDAAC: N32253 CountryCode: USA
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033
PEARL HARBOR, HI 96860-5033
UNITED STATES
Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil
Inspection and Acceptance Location
Both Destination Instructions: Material is a QA-2 and has a 30-days acceptance timeframe.
DoDAAC: N32253 CountryCode: USA
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033
PEARL HARBOR, HI 96860-5033
UNITED STATES
Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil
Section F - Deliveries or Performance
Overall Contract Delivery Period
Contractor Destination
Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes
16 Each FoB Details
Contractor Destination
2 Each FoB Details
Contractor Destination
72 Each FoB Details
Contractor Destination
2 Each FoB Details
Contractor Destination
60 Each FoB Details
Contractor Destination
2 Each FoB Details
Contractor Destination
Section G - Contract Administration Data
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.
in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
COMBO
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.
WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC N50082
Issue By DoDAAC SPMYM4
Admin DoDAAC SPMYM4
Inspect By DoDAAC N32253
Ship To Code N32253
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) N32253
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) 050120
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
prlh_phns_c610.4_contracts@us.navy.mil
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
Additional Regulation or Supplemental Clauses Incorporated by Full Text
DLAD G01 DLAD PROC NOTE G01 (Oct 2025)
G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017) Contractors shall include the Transportation Control Number (TCN) and carrier shipment tracking information when submitting the DD250/iRAPT Receiving Report in Wide Area Workflow (WAWF) in order to assist with material inspection and acceptance. *****
Section H - Special Contract Requirements
Additional Regulation or Supplemental Clauses Incorporated by Full Text
DLAD L31 DLAD PROC NOTE L31 (Oct 2025)
L31 Additive Manufacturing (JUN 2018)
(1) Additive manufacturing (AM) is a process of joining materials to make objects from three- dimensional (3D) model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies, which remove material from areas where it is not desired, or other traditional manufacturing technologies, such as molding or stamping.
(2) Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the Engineering Support Activity (ESA) for acceptability for future procurements of the same items. (3) If an item produced using AM is presented to the Government for inspection and acceptance that was not authorized in the solicitation/contract, the Government may reject the item as nonconforming.
DLAD H15 DLAD PROC NOTE H15 (Oct 2025)
H15 Transporter proof of delivery (TPD) (JAN 2021)
(a) Definition. As used in this procurement note, transporter proof of delivery (TPD) means a commercial document that is generated by the Contractor and/or the Contractor's transporter of supplies and that is signed by the Government customer in order to document delivery of supplies under this contract/order. Examples of TPD are United Parcel Service (UPS) or Federal Express (FEDEX) delivery tracking reports. TPD documentation must include a customer signature, or visibility of the name of the customer who signed.
(b) When this procurement note is included in the contract or order, the Government may use TPD, in combination with adequate Contractor documentation cross-referencing the TPD to the specific supplies provided, as a basis for accepting the supplies. TPD with adequate supporting documentation satisfies the receipt report requirement and, coupled with acceptance, allows the Government to initiate the payment process, if all other applicable payment conditions are satisfied.
(c) To facilitate the payment process, the Government will initiate a request for the Contractor to provide TPD when the customer has not provided receipt acknowledgement to the buying activity. If TPD is requested and the Contractor agrees to provide it, the documentation must include the customer signature, or visibility of the name of the customer who signed, and as much of the following information as possible:
(1) Contract number or order number;
(2) Contract line item number (CLIN);
(3) Unit price;
(4) Quantity of items;
(5) Extended price;
(6) National stock number (NSN);
(7) Delivery date;
(8) Recipient organization's name and address;
(9) Receiving activity Department of Defense activity address code (DoDAAC);
(10) Requisition document number (and suffix, when applicable);
(11) Shipment number;
(12) Invoice number; and
(13) Location where the carrier made delivery (activity name, building number, city, state). (d) Process for submitting TPD documentation.
(1) Enter wide area workflow (WAWF) using the ``history folder,'' enter the appropriate contract data, and recall the receiving report (RR);
(2) Click on "attachment." Browse and upload the TPD and any additional Contractor documentation required to provide the information identified in paragraph (c) of this procurement note. (Attachments created in any Microsoft Office product or in PDF format are acceptable.); and
(3) Click on "submit."
(e) Responsibility for supplies.
(1) Title to the supplies passes to the Government after delivery to the point of first receipt by the Government and subsequent acceptance.
(2) Notwithstanding any other provision of the contract, order, or blanket purchase agreement, the Contractor shall:
(i)Assume all responsibility and risk of loss for supplies not received at destination, damaged in transit, or not conforming to purchase requirements;
and (ii)Replace, repair, or correct those supplies promptly at the Contractor's expense, if instructed to do so by the Contracting Officer within 180 days from the date title to the supplies vests in the Government.
YM4CIMSCREWS YM4 CIM SCREWS (Sep 2025)
MERCURY EXCLUSION CLAUSE FOR MERCURY FREE PROCUREMENT ( LC-2, JAN 2013)
1. Mercury or mercury compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Supplier shall certify that all items furnished under this contract are free of mercury or mercury compounds.
TRACEABLE OBJECTIVE QUALITY EVIDENCE (OQE) (CIM 2024)
(a) OQE shows actual test results for chemical and mechanical properties in conformance to the material specification required.
(b) The material specification along with revision and amendment must be cited on the OQE.
(c) A Certificate of Compliance (COC), which is a signed document attesting the items delivered on the contract are in full compliance with all contract requirements, must be provided.
(d) Traceability must be provided via a unique heat, lot number and code permanently marked on the material per MIL-STD-792 and shown on the OQE certification document.
(e) Where the applicable product specification does not require permanent heat or lot markings, the material must be tagged or received in a package, envelope, bag or box that is annotated with the heat, lot number and code that is traceable to the OQE certification document.
NAVSIPYD&IMFPEARLINST 4855.17 CH-1 DAT AUG 12, 2024
ADDITIONAL CIM REQUIREMENTS (CIM 2012-1)
1. All certifications are required to be delivered with the material. Payment on material for which certifications are not received will be withheld.
2. Material markings shall comply with the requirements and limitations set forth in MIL-STD-792 (latest).
3. All nickel-copper-aluminum alloy (K-500) raw stock, and K-500 raw stock used in the manufacture of finished products, shall be procured to QQ-N-286 Revision G with slow strain rate tests done by the following approved laboratories:
a. Huntington Alloys, a Special Metals Company
3200 Riverside Drive
Huntington, WV 25705
b. Metallurgical Consultants, Inc.
4820 Caroline
PO Box 88046
Houston, TX 77288-0046
c. Naval Surface Warfare Center, Caderock Division
Code 614
9500 Macarthur Blvd
West Bethesda, MD 20817-5700
d. Teledyne Allvac
2020 Ashcraft Ave.
Monroe, NC 28110
e. Mannesmann Rohrenwerke
Mannesmann Forschungsinstitut (MFI)
Postfach 251160
47251 Duisburg
Germany
f. Westmoreland Mechanical Testing and Research Inc.
P.O. Box 388 Youngstown, PA 15696-0388
g. ThyssenKrupp VDM USA, Inc.
11210 Steeplecrest Drive, Suite 120 Houston, TX 77065-4939
4. Vendor acknowledgement of K-Monel heat review.
a. Recent investigations into mechanical property failures of fasteners manufactured from NiCuAl(K-Monel) material that was produced by Special Metals Corporation (formerly INCO Alloys) of Huntington, West Virginia have found eighty (80) heats of material which may not meet the mechanical property requirements of QQ-N-286 throughout the heat. In 1994, Special Metals Corporation implemented a process change that eliminated the addition of extra aluminum at the toe of each NiCuAl(K-Monel) ingot resulting in the toe portion of the heat being non-homogeneous in comparison to the rest of the heat. Due to cropping practices at Special Metals Corporation, material from the toe of the ingot with non-homogeneous aluminum content was not cropped from production material prior to shipment. A recent study has shown that the aluminum concentration in the toe portion of the ingot could be as low as approximately 2.0% with a corresponding yield strength as low as approximately 40,000 PSI. QQ-N-286 specifies an aluminum content of 2.3% minimum and a yield strength of 90,000 PSI minimum or 85,000 PSI minimum for material 1". As a result of the investigation, the eighty (80) heats listed in Table I are considered suspect of having problems with insufficient aluminum content and an inability to consistently attain the required minimum yield strength.
b. You are requested to review your records of in stock and in process K-Monel material from the Special Metals Corporation for the suspect heat numbers listed in Table I below. You are prohibited from providing raw stock or finished products made from the suspect K-Monel heats. If suspect heats are intended to be used, contact the PHNS & IMF contracting officer for adjudication of the material.
Table I - List of Suspect Special Metals…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .