COMBINED SYNOPSIS - SPMYM4-26-Q-3538.pdf

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simpli�ied Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is (SPMYM4-26-Q-3538). This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 October 1, 2025, and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these address(s):

https://www.ecfr.gov https://www.acquisition.gov/content/list-sections-affected http://www.acq.osd.mil/dpap/dars/change_notices.html

The FSC Code is 5305 and the NAICS code is 332722. The Small Business Standard is # employees. This requirement is a Unrestricted

Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.

Offerors are required to submit descriptive literature to show how their quotation meets the required speci�ications. A technical spec sheet and proof of traceability are required to be sent with quote. Failure to provide this information may result in your quotation being determined technically unacceptable. Only one quote per vendor may be sent.

DLA Weapons Support, Pearl Harbor requests responses from quali�ied sources capable of providing: Interested parties must �ill out the required request for quote saved in the attachment section. It is titled, “”.

ITEM DESCRIPTION QTY U/I UNIT PRICE TOTAL PRICE

0001 CAPSCREW 20 EA __________ ___________

SCREW, CAP SLFLKG, SCH FLH 82, 1.375"-6UNRC-2A X 4.000", FF-S-86J TY-IV, ASTM 8446-24

GRADE 1 ALY-N06625,

MIL-DTL-18240F TYPE-N. MOD: 80 KSI MIN YIELD STRENGTH MATERIAL

ACQUISITION REQUIREMENTS:

A) FEDERAL SPECIFICATION FOR SCREW, CAP, SOCKET-HEAD; FF-S-86J DTD 01APR2025.

B) TYPE IV, NICKEL ALLOY 625 IAW ASTM 8446-24 GRADE 1, SIZE: 1.375"-6UNRC-2A X 4.000".

C) NIA.

D) REQUIRED.

E) & F) NOT REQUIRED.

https://www.ecfr.gov/ https://www.acquisition.gov/content/list-sections-affected http://www.acq.osd.mil/dpap/dars/change_notices.html

G) 6UNRC-2A.

H) NOT REQUIRED.

I) & J) NIA.

K) & L) REQUIRED.

ADDITIONAL REQUIREMENTS:

1) SELF-LOCKING (TYPE N) IAW MIL-DTL-18240F DTD 02JUN1997 W/AMD-1 DTD 13MAR2000.

QPL-18240-QPD DTD

28MAY2026 APPLIES AND IS AVAILABLE THROUGH ASSIST. SEE ATTACHED FOR PLUG/PELLET

INSTALLATION.

2) ASTM-8446-24 MOD: 80 KSI MIN YIELD STRENGTH MATERIAL.

3) IDENTIFICATION MARKING REQUIREMENTS I.A.W UNS N06625.

4) MARKINGS OF A MINIMUM SIX (6) DOTS (APPROXIMATELY .032 DIA) RAISED OR DEPRESSED

(APPROXIMATELY .010)

SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF

NECESSARY).

5) ALL FASTENERS MUST BE NDT INSPECTED IAW DWG NOTE 7003. SEE ATTACHED.

6) SEE ATTACHED DWG NOTES FOR MOD AND ADDITIONAL MANUFACTURING REQUIREMENTS.

000101 CONTROLLED INDUSTRIAL MATERIAL (CIM) 2 EA ___NSP____ ___NSP_____

CERTIFICATION IS REQUIRED AS SPECIFIED IN

TRACEABLE OBJECTIVE QUALITY

**2 COPIES OF CERTIFICATION IS REQUIRED**

0002 SHIPPING 1 EA _________ ___________

NOTE: OFFEROR MUST COMPLETE THE ATTACHED RFQ DOC AND PROVISIONS 52.204-24,

52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS

WITH THEIR QUOTE.

FAR CLAUSES AND PROVISIONS

52.204-7, System for Award Maintenance

52.204-9, Personal Identity Veri�ication of Contractor Personnel

52.204-13, SAM Maintenance

52.204-19, Incorporation by Reference of Representations and Certi�ications

52.204-24* See Attachment for this provision

52.204-26* See Attachment for this provision

52.204-29 FASCSA Representation* See Attachment for this provision

52.211-14, Notice of Priority Rating

52.211-15, Defense Priority And Allocation Requirements

52.211-16, Variation in Quantity

52.211-17, Delivery of Excess Quantities

52.212-1, Instructions to Offerors - Commercial Products and Commercial Services

52.212-3, Offeror Reps and Certs - Commercial Products and Commercial Services

52.212-4, Contract Terms and Conditions – Commercial Items

52.219-1 Alt 1 Small Business Program Representations

52.222-90 Addressing DEI Discrimination by Federal Contractors

52.223-22, Sustainable Products and Services (DEVIATION 2025-O0004) in lieu of clause at FAR 52.223-23.

52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs

52.232-18 Availability of Funds *See Attachment for Full Text

52.232-39, Unenforceability of Unauthorized Obligations

52.233-2 Service of Protest

52.242-13 Bankruptcy

52.242-15 Stop Work Order

52.243-1, Changes Fixed Price

52.246-1, Contractor Inspection Requirements

52.247-34, F.O.B-Destination

52.252-1 Solicitation Provisions Incorporated by Reference

52.252-2 Clauses Incorporated by Reference

52.253-1, Computer Generated Forms

52.203-19, Prohibition on Requiring Certain Internal Con�identiality Agreements or Statements

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

52.233-3, Protest After Award

52.233-4, Applicable Law for Breach of Contract Claim

52.204-10 Reporting Executive Compensation

52.204-27 Prohibition on a ByteDance Covered Application

52.204-30 FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition

52.219-6 Notice of Total Small Business Set-Aside

52.219-28 Post-Award Small Business Program Representation

52.222-3 Convict Labor

52.222-19 Child Labor

52.222-50 Combating Traf�icking in Persons

52.223-11 Ozone Depleting Substances

52.225-1 Buy American-Supplies

52.225-13 Restriction on Certain Foreign Purchases

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-33 Payment by EFT-SAM

52.232-36 Payment by Third Party

52.247-64 Preference for Privately Owned US-Flag Commercial Vessels

DFARS CLAUSES AND PROVISIONS

252.203-7000 Requirements Relating to Compensation of Former DoD Of�icials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights

252.203-7005 Representation Relating to Compensation of Former DoD Of�icials

252.204-7003. Control of Government Personnel Work Product

252.204-7004 Antiterrorism Awareness Training for Contractors.

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

252.204-7015, Disclosure of Information to Litigation Support Contractors

252.204-7016, * See Attachment for this provision.

252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation

252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.204-7024 Notice on the Use of the Supplier Performance Risk System

252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008 Prohibition of Hexavalent Chromium

252.225-7001 Buy American and Balance of Payments Program

252.225-7002 Qualifying Country Sources as Subcontractors

252.225-7013 Duty-Free Entry (NOV 2023)

252.225-7048, Export Controlled Items

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

252.231-7000, Supplemental Cost Principles.

252.232-7003, Electronic Submission of Payment Requests

252.232-7006, Wide Area Work�low Payment Instructions *See Attachment for Full Text

252.232-7010, Levies on Contract Payments

252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001) *See Attachment for Full Text

252.243-7001, Pricing of Contract Modi�ications

252.243-7002, Requests for Equitable Adjustment

252.244-7000, Subcontracts for Commercial Items

252.247-7023, Transportation of Supplies By Sea

Note: Vendor shall list the country of origin for each line item.

DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)

5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)

C04 Unused Former Government Surplus Property (DEC 2016)

C14 Repackaging or Relabeling to Correct De�iciencies (AUG 2017)

C20 Vendor Shipment Module (VSM) (AUG 2017)

E05 Product Veri�ication Testing (JUN 2018)

H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance

(FEB 2020)

L06 Agency Protests (DEC 2016)

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations

L31 Additive Manufacturing (JUN 2018)

M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)

LOCAL CLAUSES (See Attachment for Full Text):

L001 EUROPEAN UNION RESTRICTIONS REGARDING NONMANUFACTURED WOOD PACKAGING

AND PALLETS

L003 UNIT PRICES

L331 REVIEW OF AGENCY PROTESTS

E7F754 CERTIFICATIONS REQUIRED WITH DELIVERY OF MATERIAL

Quoters are reminded to include a completed copy of 52.212-3 and ALT I if not updated in SAM.gov.

This announcement will close 07/30/2026 12pm HST. The Point of Contact for this solicitation is Amanda Ragsdale who can be reached at Amanda.n.ragsdale.civ@us.navy.mil

System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.

If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.

Please submit quotations via email at Amanda.n.ragsdale.civ@us.navy.mil

All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Work�low (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, PayPal, etc.) Each response must clearly indicate the capability of the quoter to meet all speci�ications and requirements.

*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.

******* END OF COMBINED SYNOPSIS/SOLICITATION ********

mailto:Amanda.n.ragsdale.civ@us.navy.mil mailto:Amanda.n.ragsdale.civ@us.navy.mil

REQUEST FOR QUOTATION SPMYM4-26-Q-3538

** THIS IS NOT AN ORDER **

PLEASE PROVIDE DELIVERED PRICES (FOB DESTINATION)

REFERENCE: SPMYM4-26-Q-3538

SET ASIDE: UNRESTRICTED

NAICS: 332722

QUOTE DUE: 7/30/2026; 12:00 PM HST

CONTACT

DLA MARITIME – PEARL HARBOR

CONTRACT SPECIALIST: Amanda Ragsdale Desk Phone: 808-285-0182 Email Quotes to: Amanda.N.Ragsdale.civ@us.navy.mil

VENDOR INFORMATION

Vendor Name:

CAGE Code:

Phone:

Email:

Quoted Valid for ___ Days

*** PLEASE FILL OUT THIS FORM COMPLETELY***

** In accordance with FAR 52.204-7(b)(1), an Offeror is required to be registered in SAM when submitting an offer or quotation, and must be listed as active, to prevent unduly delaying award. Information, instructions, forms, etc.

for the System for Award Management (SAM) are available at https://www.sam.gov/portal/public/SAM/ **

Attention: Provisions below MUST be filled in to be considered for award.

SHIPPING INFORMATION

PLACE OF MFG/COUNTRY OF ORIGIN: _____________

ESTIMATED DELIVERY TO PEARL HARBOR__________ Calendar Days ARO

FOB TERMS: DESTINATION

SHIP TO:

DoDAAC: N32253 Country Code: USA

PEARL HARBOR NAVAL SHIPYARD IMF

667 SAFEGUARD STREET, BLDG 167-1 RECV 808-

473-8000X4961

PEARL HARBOR, HI 96860-5033

UNITED STATES

Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil https://www.sam.gov/portal/public/SAM/

IMPORTANT NOTE: The below Required Delivery Date (RDD) shall be met or exceeded in order to ensure your offer is considered responsive. If no offers are received which meet or exceed the Government’s RDD, award may proceed to the LPTA offeror, and may be made based on soonest delivery.

GOVERNMENT RDD: 7AUG2026

PAYMENT INFORMATION

PAYMENT TERMS______%______DAYS DISCOUNT TERMS __________________

Preferred Method payment: Wide Area Workflow (WAWF) Payment terms are always Net 30 AFTER the material has passed inspection and has been accepted.

REQUEST AND RECEIVING REPORTS is applicable to this solicitation. Please note that the WAWF (Wide Area Work Flow) will be used as the method of payment for supplies and/or services procured under this solicitation.

Information regarding WAWF is available on the internet at https://wawf.eb.mil.

YOUR COMPANY INFORMATION

YOUR BUSINESS SIZE: ___ Large (LG), ___ Small (SB), ___ Small-Disadvantaged Business (SDB), ___ Veteran-Owned Small Business (VOSB), ___ Women-Owned Small Business (WOSB), ___ Economically Disadvantaged Women-Owned Small Business (EDWOSB), ___ Service Disabled Veteran Owned Small Business (SDOVSB), ___ (HUBZONE), ___ (8a).

QUOTING AS MANUFACTURER? Yes ___ No ___

Name of Quoted Manufacturer ___________________

QUOTING AS: ___ AUTHORIZED DISTRIBUTOR or ___ THIRD PARTY DEALER

IS YOUR COMPANY’S PRICING INDEPENDENT FROM THE MANUFACTURER? Yes ___ No ___

SAM CAGE CODE: ________________

Representations must be filled in below, and provided with the submission of the quote.

Offers received without completed representaions may not be considered for award.

PRINTED NAME_______________________________SIGNATURE_____________________________

DATE______________

https://wawf.eb.mil/

MATERIAL INFORMATION

Shipping to be included in the Unit Price

ITEM DESCRIPTION QTY U/I UNIT PRICE TOTAL PRICE

0001 CAPSCREW 20 EA __________ ___________

SCREW, CAP SLFLKG, SCH FLH 82, 1.375"-6UNRC-2A X 4.000", FF-S-86J TY-IV, ASTM 8446-24 GRADE 1 ALY-N06625, MIL-DTL-18240F TYPE-N. MOD: 80 KSI MIN YIELD STRENGTH MATERIAL

ACQUISITION REQUIREMENTS:

A) FEDERAL SPECIFICATION FOR SCREW, CAP, SOCKET-HEAD; FF-S-86J DTD 01APR2025.

B) TYPE IV, NICKEL ALLOY 625 IAW ASTM 8446-24 GRADE 1, SIZE: 1.375"-6UNRC-2A X 4.000".

C) NIA.

D) REQUIRED.

E) & F) NOT REQUIRED.

G) 6UNRC-2A.

H) NOT REQUIRED.

I) & J) NIA.

K) & L) REQUIRED.

ADDITIONAL REQUIREMENTS:

1) SELF-LOCKING (TYPE N) IAW MIL-DTL-18240F DTD 02JUN1997 W/AMD-1 DTD 13MAR2000. QPL-18240-QPD DTD 28MAY2026 APPLIES AND IS AVAILABLE THROUGH ASSIST. SEE ATTACHED FOR PLUG/PELLET INSTALLATION.

2) ASTM-8446-24 MOD: 80 KSI MIN YIELD STRENGTH MATERIAL.

3) IDENTIFICATION MARKING REQUIREMENTS I.A.W UNS N06625.

4) MARKINGS OF A MINIMUM SIX (6) DOTS (APPROXIMATELY .032 DIA) RAISED OR DEPRESSED (APPROXIMATELY .010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).

5) ALL FASTENERS MUST BE NDT INSPECTED IAW DWG NOTE 7003. SEE ATTACHED.

6) SEE ATTACHED DWG NOTES FOR MOD AND ADDITIONAL MANUFACTURING REQUIREMENTS.

000101 CONTROLLED INDUSTRIAL MATERIAL (CIM)

REQUIREMENT 2 EA ___NSP____ ___NSP_____

CERTIFICATION IS REQUIRED AS SPECIFIED IN

TRACEABLE OBJECTIVE QUALITY

**2 COPIES OF CERTIFICATION IS REQUIRED**

0002 SHIPPING 1 EA __________ ___________

ADDT’L MATERIAL INFORMATION

Is there a minimum order quantity? SPECIFY: __________ Are there any quantity breaks? RANGE AND PRICING: _______________

Does the item offered contain hazardous materials? No ___ Yes ___ (MSDS Required)

EVALUATION CRITERIA

☒ If checked, the Government anticipates making a single award (all or none), If this box is not checked, requirement will be evaluated for split award.

Source selection criteria:

1. PRICE

2. TECHNICALLY ACCEPTABLE

3. DELIVERY

Quotations submitted by each vendor will be evaluated in accordance with the specifications provided in the solicitation, and determined to be either acceptable or unacceptable. Technical submissions that do not meet the minimum requirements will be rated as "Unacceptable" and will no longer be considered for further competition or award. The Government intends to make an award without discussions.

☐ If checked, SPRS evaluation procedures apply to determine vendor responsibility.

Other than Certified Cost and Pricing Data may be requested to support fair and reasonable price determination.

INSPECTION

Inspection Location: ☒ Final Inspection at Destination

Inspection Terms: QA1 ☐ , QA2 ☒ , QA3 ☐ , QA4 ☐ Inspection Time: QA-4 material has a 7-day inspection time and QA-2 and QA-3 have a 30-day inspection time.

ATTACHMENTS:

CLAUSES AND PROVISIONS

KMONEL

FAR 52.209-1: QUALIFICATION REQUIREMENTS

DRAWING

CL 32

. 281

• 2so _'=-:.-iii

4 I

I 377 OIAHETRAL OIHENSION AT

I 367 INSERT ROD LOCATION

21} SEE OETAJL l2-7F

& NOTES 55.61.200,

507. 700 I & 7003

____ _J

ZI

SEE DETAIL 12-7F

&.NOTES 55.61,200,

507. 700 I 8, 700J

DETAIL 12-H

LOCK I NG PELL�T

INSTALLATION

SCALE:NONE

( 12·SF. IZ-IG)

TYPICAL DETAIL 12-sr

SAIL INTERFACE

TYPICAL DETAIL 12-lf

HULL INTERFACE

LOOKING F\.10

sg���w

55 WHEN REFERENCED TO THIS NOTE, THREAD DIMENSIONS ANO

DESIGNATIONS SHALL BE INTERPRETED IN ACCORDANCE WITH

FSJ�STD-H28 AND ANSI n.i. 6, Al:SPECTIVELY.

sm�JW

61 ALL SELF-LOCKING EXTERNALLY THBEAOEO FASTENERS SHALL HAVE

SELF-LOCKING INSERTS TO SPECIFICATION MIL-F-18240. MA.Rl<INSS OF A MINIMUM SIX (61 OOTS (APPROXIMATELY .032 DIA) RAISED ClR

DEPRESSED {APPROXIMATELY .010) SHALL BE PLACED ON THE HEAD

OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).

NOTES:

1. 55, 61, 7001, and 7003 A) through E) are required.

2. ALL FASTENERS MUST BE NON-DESTRUCTIVELY

INSPECTED IN ACCORDANCE WITH NOTE 7003A.

Acceptance criteria to ASTM F788/788M, FF-S-86H, or FF-S-86J is acceptable in lieu of SAE J123.

700i THREAD FORMS SHALL BE INSPECTED FOR COMPLIANCE TO

FED-STO-H28 SYSTEM 21 WITH THE ADDITION OF MINIMUM MATERIAL

PITCH DIAMETER MEASUREMENT PER ASME Bi.3M IN LIEU OF

SYSTEM 22 .

7003 FASTENERS REFERRING TO THIS NOT.E SHALL BE MANUFACTURED WITH

ROLLED THREADS AND INSPECTED I.A.W. THE FOLLOWING:

A) FASTENERS SHALL BE 100% NDNQESTRUCTIVELY INSPECTED BY

LIQUID PENETRANT TESTS IN ACCORADANCE WITH MIL-ST0-271 WITH

ACCEPTANCE TESTING TO SAE J123. THE USE OF GROUP I PENETRANT

MATERALS OR SOLVENT-TYPE REMOVERS UTILIZED IN OTHER GROUP

METHODS INSPECTION OF MIL-ST0-271 SHALL BE PROHIBITED.

8) MARKS ON THREADS CAUSED BY THE SEPERATION ON THREAD ROLL

ING DIES:FIGURE 68 OF SAE J123C ARE NOT ALLOWED.NO SEAMS ARE

ALLOWED.

C) TOLERANCES:UNLESS SPECIFIED ON DETAIL SHEET TOLERANCES

TO BE AS FOLLOWS:

. XX= +/-0.01

.xxx,,. +/-0.005

D) THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28.

El MACHINING TO REMOVE MILL SCALE OXIDER IS AN ACCEPTABLE

ALTERNATIVE TO PICKLING.

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(a) Definition: "Qualification requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification.

(Name) (Address)

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name Manufacturer's Name Source's Name Item Name Service Identification Test Number (to the extent known)

(d) Even though a product or service subject to a qualification requirement is not in itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract.

This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate the contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interests, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(End of clause)

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.

Dec 2023

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

52.204-27 Prohibition on a ByteDance Covered Application. Jun 2023 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.222-50 Combating Trafficking in Persons. Oct 2025 52.223-23 Sustainable Products and Services. May 2024 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004

52.240-1 Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities.

Nov 2024

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

Sep 2011 Dec 2022 May 2024

Jan 2023

Jan 2023 Jan 2023 Dec 2006 Nov 2023 Oct 2024

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or 252.204-7018

Services.

252.223-7008 Prohibition of Hexavalent Chromium.

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

252.232-7010 Levies on Contract Payments.

252.244-7000 Subcontracts for Commercial Products or Commercial Services.

252.247-7023 Transportation of Supplies by Sea.

CLAUSES & PROVISIONS

Representations, Certification, & Other Statements

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

May 2021

252.225-7055 Representation Regarding Business Operations with the Maduro Regime. May 2022

FAR Clauses Incorporated by Full Text

52.204-8 Annual Representations and Certifications. (DEVIATION 2025-O0003 and 2025-O0004)

(Oct 2025) Deviation 2025-O0004 (Mar 2025)

ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004)

(a)

(1) The North American Industry Classification System (NAICS) code for this acquisition is 332722[insert NAICS code].

(2) The small business size standard is 600[insert size standard].

(3) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519 if the acquisition-

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b)

If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.(1)

(2) If the provision at 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

(i) Paragraph (d) applies.

(ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c)

The following representations or certifications in SAM are applicable to this solicitation as indicated:(1)

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless-

(A) The acquisition is to be made under the simplified acquisition procedures in part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.

This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that-

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.204-26, Covered Telecommunications Equipment or Services-Representation. This provision applies to all solicitations.

(vii) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations-Representation.

(viii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(ix) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(x) 52.214-14, Place of Performance-Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(xi) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xii) 52.219-1, Small Business Program Representations (Basic, Alternates I, and II). This provision applies to solicitations when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(C) The provision with its Alternate II applies to solicitations that will result in a multiple-award contract with more than one NAICS code assigned.

(xiii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(xiv) [Reserved]

(xv) [Reserved]

(xvi) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial products or commercial services.

(xvii) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of biobased products in USDA-designated product categories; or include the clause at 52.223-2, Reporting of Biobased Products Under Service and Construction Contracts.

(xviii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA-designated items.

(xix) [Reserved]

(xx) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xxi) 52.225-4, Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Basic, Alternates II and III.) This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $50,000, the basic provision applies.

(B) If the acquisition value is $50,000 or more but is less than $100,000, the provision with its Alternate II applies.

(C) If the acquisition value is $100,000 or more but is less than $102,280, the provision with its Alternate III applies.

(xxii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xxiii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan-Certification. This provision applies to all solicitations.

(xxiv) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. This provision applies to all solicitations.

(xxv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[ ]Contracting Officer check as appropriate.

52.204-17, Ownership or Control of Offeror.(i)

52.204-20, Predecessor of Offeror.(ii)

52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.(iii)

52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of(iv) Certain Equipment- Certification.

52.222-52, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Certification.(v)

52.227-6, Royalty Information.(vi)

Basic.(A)

Alternate I.(B)

52.227-15, Representation of Limited Rights Data and Restricted Computer Software.(vii)

(d) The offeror has completed the annual representations and certifications electronically in SAM website accessed through https://www.sam.gov.

After reviewing the SAM information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [

]. These amended representation(s) and/or certification(s) are also offeror to insert changes, identifying change by clause number, title, date incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause # Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

(End of provision)

52.204-29 Federal Acquisition Supply Chain Security Act Orders-Representation and Disclosures. (Dec 2023)

FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS-REPRESENTATION AND DISCLOSURES (DEC 2023)

(a) As used in this provision, Definitions. Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, and have the meaning provided in the clause 52.204-30, Sensitive compartmented information, Sensitive compartmented information system, Source

Federal Acquisition Supply Chain Security Act Orders-Prohibition.

(b) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any productsProhibition.

or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition.

.(c) Procedures

The Offeror shall search for the phrase "FASCSA order" in the System for Award Management (SAM)( for any covered(1) https://www.sam.gov) article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR

52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition.

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does notRepresentation.

propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) The purpose for this disclosure is so the Government may decide whether to issue a waiver. For any covered article, or anyDisclosures.

products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) The contracting officer will review disclosures provided in paragraph (e) to determine if any waiverExecutive agency review of disclosures.

may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

(End of provision)

52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services. (DEVIATION 2025-O0003 and 2025-O0004)

(Oct 2025) Deviation 2025-O0004 (Mar 2025)

OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025)

(DEVIATION 2025-O0003 AND 2025-O0004)

(a) . As used in this provision-Definitions

Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395 (b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110- 174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"-

Sensitive technology-

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business (SDVOSB) concern means a small business concern-

(1)

Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned(i) business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) , as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service connected,Service-disabled veteran as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs' Veterans Benefits Administration, as a service-disabled veteran.

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that-

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

Service-disabled veteran-owned small business (SDVOSB) Program means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others,Affiliates or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with 13 CFR 124.1001, means a small business concern under the size standard applicable to the acquisition, that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at ) by-13 CFR 124.105

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at )13 CFR 124.104 individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned-

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern-

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women

Women-owned small business concern means a small business concern-

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)

. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically(1) Annual Representations and Certifications change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs .____

[Offeror to identify the applicable…