Sizing_Blocks_Sketch.pdf
PDF 114 KB Posted
- Attached to
- UT SIZING CALIBRATION BLOCKS
- Solicitation number
- SPMYM4-16-Q-0302
About this file
ATTACHMENT SIZING BLOCK SKETCH
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 19_Amendment_SPMYM4-16-Q-0302.doc | DOC document | |
| 19_Attachment_Ultrasonic_Calibration_Sizing_Standard_Details_(3).pdf | ||
| 19_SPMYM4-16-Q-0302.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1.800” 1.600”
1.400” 1.200”
1.000”
HY-80 Steel
Serial No. UTCS 3C
0.900” 0.800” 0.700” 0.600” 0.500” HY-80 Steel
Serial No. UTCS 3B
2.800” 2.600”
2.400” 2.200”
2.000”
HY-80 Steel Serial No. UTCS 3D
0.450” 0.400” 0.300” 0.200” 0.100” HY-80 Steel Serial No. UTCS 3A
THESE SKETCHES ARE FOR LETTERING / NUMBERING OF BLOCKS ONLY!
Refer to other sketches for block and notch dimensions, actual depth measurements and finish requirements.
All lettering and numbering approximately 5/32” height laser etched Approximate depth of laser etching = 0.0005” Painting of lettering/numbering not required.
The approximate locations of lettering and numbering are shown on sketch above.
Serial number and material etched only on one side of the block.
Numbered measurements etched on both sides of the block.
Numbers indicated to the thousandths (0.000”) Numbers indicates metal path distance from top surface to notch, not notch depth!
File details come from the government source that posted it. Updated .