Attachment 1.pdf
PDF 135 KB Posted
- Attached to
- Socket Head Cap Screws
- Solicitation number
- SPMYM327Q5007
About this file
This is a contract specification document for a federal procurement of socket head capscrews under contract SPMYM327Q5007.
The contract specifies the procurement of socket head capscrews (Stock Number 5305-LL-D00-0230) conforming to Federal Specification FF-S-86J, Type VI. The screws must measure 0.4375-20UNF-3A by 2.000 inches and be manufactured from NICUAL material per QQ-N-286G, annealed and age hardened, with heads drilled for lockwire in accordance with FF-S-86J specifications. Critical material processing requirements mandate that NICUAL material subjected to heading or roll threading operations must be solution annealed prior to age hardening, and threads formed after final age hardening must be cut or ground only. The contractor must submit a Certificate of Compliance (CDRL DI-MISC-81356A) and a Certification/Data Report (CDRL DI-MISC-80678). Standard clauses apply regarding mercury exclusion, marking and certification requirements, and restrictions on K-Monel material. Packaging shall follow standard commercial practice, and inspection and acceptance occur at destination per FAR 52.246-1 with constructive acceptance notice provisions. The material is classified as non-Level-1, and special provisions for threaded products apply.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses 8-28-2026.pdf | ||
| Combined Synopsis Solicitation 27Q5007.pdf | ||
| Exhibit A.pdf | ||
| RFQ 27P5007.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1Contract_______________________
Attachment____________________
Section "B"
FSC 5305
Stock Number: 5305-LL-D00-0230
Item Name: SOCKET HEAD CAPSCREW
Section "C"
C.1: SOCKET HEAD CAP SCREW. FF-S-86J, TY VI. 0.4375-20UNF-3A X 2.000. NICUAL, QQ-
N-286G, ANNEALED AND AGE HARDENED. HEAD TO BE DRILLED FOR LOCKWIRE IAW
TABLE 1 OF FF-S-86J.
NOTE: Earlier revisions of FF-S-86 are acceptable as long as the certifications or COC document that
NICUAL material having been headed or roll threaded shall not be age hardened unless it has been solution annealed subsequent to the heading and threading operations. Threads formed after the final age hardening heat treatment shall be cut or ground only.
C.2 See Exhibit "A" Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).
C.3 See Exhibit "A" Seq. A002: CDRL DI-MISC-80678 (Certification / Data Report).
C.4 PNS Standard Clauses C500 (Mercury Exclusion), C524 (Marking & Certification Requirements) &
C531 (Restrictions on K-Monel Material) Apply.
Section "D"
D2.2 STANDARD COMMERCIAL PRACTICE (COMMERCIAL PACKAGING) APPLIES.
Section "E"
PNS STANDARD FAR 52.246-1 CLAUSE (CONTRACTOR INSPECTION REQUIREMENTS),
E-2 (INSPECTION & ACCEPTANCE - DESTINATION) & E504 (NOTICE OF CONSTRUCTIVE
ACCEPTANCE PERIOD) APPLY.
Section "G"
NON LEVEL-1 MAT'L
Section "H"
STANDARD CLAUSE H500 (SPECIAL PROVISIONS FOR THREADED PRODUCTS) APPLIES.
michael.cruver
LEVEL 1
| Contract: SPMYM327Q5007 |
| Attachment: 1 |
File details come from the government source that posted it. Updated .