Data Requirements SPMYM326Q4011.pdf

PDF 1 MB Posted

Attached to
Hardware
Solicitation number
SPMYM327Q4011
Issued by

About this file

This document is a Contract Data Requirements List (CDRL) containing multiple data item requirements across six separate federal contracts for fastener products.

The contracts involve the procurement of various fastener items including cap screws (Contract PR 62744321-2 and 62744341-2), hex head capscrews/socket head cap screws (Contract PR 6274441 and 6303404), bolt studs (Contract PR 6275401), and socket head cap screws (Contract PR 6303403). All contracts are managed by Code 245 offices with requiring office designated as CODE 245. Each contract specifies two data items: Data Item A001 requiring a Certificate of Compliance (authority DI-MISC-81356A, referencing Section C.2) and Data Item A002 requiring Certification Data/Report for Chemical & Mechanical Certification (authority DI-MISC-82386 or DI-MISC-80678, referencing Section C.3). Both data items are classified as one-time submissions due with material delivery, with distribution statement "A" required and DD 250 documentation mandated. The certification data must contain actual quantitative test results for all chemical and mechanical tests specified in the respective specifications, with fastener certification requiring evidence of testing the correct number of specimens and new untested fasteners for wedge tensile testing and yield strength testing. Each data item submission must be submitted under a separate shipment number. Approval dates range from June 17, 2026 to November 1, 2026, with preparation dates between June 2026 and August 2026.

View the file

Other files

File Type Posted
Combined Synopsis Solicitation Hardware SPMYM327Q4011.docx DOCX document
Clauses - Full Text Provisions and Clauses.docx DOCX document
RFQ SPMYM327P4011 Hardware 62744321.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CONTRACT DATA REQUIREMENTS LIST

245.2I-1218-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744321-2

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

A002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/28/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

J. DATE

10/30/26

245.2I-1218-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744321-2

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7/28/2026

R e c o v e r a b l e S i g n a t u r e

245.2I-1228-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744341-2

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7/29/2026

R e c o v e r a b l e S i g n a t u r e

11/01/26

245.2I-1228-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744341-2

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7/29/2026

R e c o v e r a b l e S i g n a t u r e

11/01/26

245.2O-1269-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS/SHCS

E. CONTRACT/PR NO.

6274441

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

MICHAEL OBRIEN Ext: 0546 245.2O

08/03/2026

R e c o v e r a b l e S i g n a t u r e

245.2O-1269-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS/SHCS

E. CONTRACT/PR NO.

6274441

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

08/03/2026

R e c o v e r a b l e S i g n a t u r e

245.2C3-1319-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

BOLT STUDS

E. CONTRACT/PR NO.

6275401

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

08/10/2026

R e c o v e r a b l e S i g n a t u r e

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

BOLT STUDS

E. CONTRACT/PR NO.

6275401

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

R e c o v e r a b l e S i g n a t u r e

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

BOLT STUDS

E. CONTRACT/PR NO.

6275401

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

R e c o v e r a b l e S i g n a t u r e

245.2O-1065-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SHCS

E. CONTRACT/PR NO.

6303403

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7/1/2026

R e c o v e r a b l e S i g n a t u r e

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SHCS

E. CONTRACT/PR NO.

6303403

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

R e c o v e r a b l e S i g n a t u r e

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SHCS

E. CONTRACT/PR NO.

6303403

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

R e c o v e r a b l e S i g n a t u r e

245.2O-00974-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO.

6303404

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

06/17/2026

R e c o v e r a b l e S i g n a t u r e

245.2O-00974-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO.

6303404

F. CONTRACTOR

1. DATA ITEM NO.

CERTIFICATION OF QUALITY

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

06/17/2026

R e c o v e r a b l e S i g n a t u r e

Exhibit A - 4011
Exhibit B - 4011
Exhibit C - 4011
Exhibit D - 4011
Exhibit E - 4011
Exhibit F - 4011
Exhibit G - 4011
Exhibit H - 4011
Exhibit J - 4011
Exhibit K - 4011
Exhibit L - 4011
Exhibit M - 4011
Exhibit N - 4011
Exhibit P - 4011

File details come from the government source that posted it. Updated .