YM3 Clauses-Updated 10-27-2026.docx
DOCX document 30 KB Posted
- Attached to
- Panduit Strapping
- Solicitation number
- SPMYM327Q3000
About this file
This document contains the contract clauses and administrative instructions for RFQ SPMYM327Q3000 issued by Portsmouth Naval Shipyard, a Defense Logistics Agency Land and Maritime facility located in Kittery, Maine.
The solicitation is a 100% Small Business Set-Aside requiring Panduit-brand strapping (P/N NCMSCNW50T20CR4) in a quantity of 100 rolls, with award based on Lowest Price Technically Acceptable (LPTA) criteria. Offerors must submit descriptive literature demonstrating compliance with specifications and complete FAR 252.204-7016 provisions with their offer. Quotations representing alternative manufacturers will not be considered, as Panduit is the only NAVSEA-approved manufacturer for this requirement. Payment will be made via Government Purchase Card on a Net 30 basis following final inspection and acceptance at the receiving activity. Invoices should be submitted to PORTS.N39040_Accts_Payable@navy.mil or faxed to 207-438-4200. All shipments must comply with MIL-STD-129 marking standards for military items or ASTM D-3951 for commercially packaged items, with prohibitions on asbestos, excelsior, yellow wrapping (except radioactive materials), and loose fill polystyrene for shipboard use. Deliveries to Portsmouth Naval Shipyard are accepted Monday through Friday between 7:00 AM and 2:30 PM local time, excluding federal holidays, and drivers must be U.S. citizens by birth or carry naturalization evidence. Contractor contact for the solicitation is Rachel McCluskey, DLA Weapons Support – Portsmouth, at 207-438-6818 or Rachel.j.mccluskey.civ@us.navy.mil.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1-Specifications.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Portsmouth Naval Shipyard Kittery, ME 03904
SPMYM3
YM3 Clauses
YM3 A1:
INVOICING AND PAYMENT INSTRUCTIONS
Contracting Officer’s point of contact is:
, Code Tel: 207-438-
Submit invoices via Wide Area Workflow (https://wawf.eb.mil) in accordance with the instructions contained in FAR 252.232-7006 (Wide Area Workflow Payment Instructions). Calls inquiring on payments can be made to DFAS Cleveland Customer Service 1-855-608-3975, Monday - Friday between the hours of 9:30 a.m. - 2:30 p.m. EST.
When invoicing, please ensure you invoice matches exactly what the WAWF table in clause 252.232-7006 dictates, and that you enter in the proper ACRN for the line item for the associated CLIN. Do NOT leave the ACRN field blank. If the information does not match you may be subject to significant payment delays or invoice rejections.
DFAS online ticketing system: https://corpweb1.dfas.mil/askDFAS/custMain.action?mid=14
WAWF invoice/reject inquiries can be made to ask DFAS by email at: https://www.dfas.mil/dfas/AskDFAS/
The DFAS website is https://www.dfas.mil/dfas/AskDFAS/DoDAAC.html
YM3 A3:
Government Purchase Card Method of Payment Additional Information Contracting Officer's point of contact is:
, Code Tel: 207-438-
INVOICING/PAYMENT INSTRUCTIONS
This is a “Net 30” contract unless otherwise specified.
We are paying a “Net 30” invoices via Government purchase card
Payment for material/services provided under this order will be made by Government Purchase Card. Invoices should be mailed to the address shown on the front page of this order, or faxed to Cardholder Accounts Payable listed below. However, no payments will be made until goods and services have completed final inspection by the Receiving Activity. After acceptance of goods and/or services and receipt of invoice, the vendor will be contacted by an active cardholder and given an authorized Purchase Card number, which will accept the charges for material or services.
For order processing only, a Purchase Card number may be issued. This may or may not be the same Purchase Card number authorized for payment upon acceptance. To obtain a Purchase Card number for processing, contact one of the cardholders listed below.
Cardholder Information:
| Portsmouth Naval Shipyard Code 612.6 |
| Accounts Payable |
| 207-438-4430, or |
| 207-438-4467, or |
| 207-438-4428, or |
| 207-438-4424 |
PREFERRED INVOICING METHOD:
Email invoices to: PORTS.N39040_Accts_Payable@navy.mil
ALTERNATE INVOICING METHOD:
Accounts Payable Fax number 207-438-4200
Order is Tax Exempt (02-830038K) Amount of charge is the same as contract amount (including freight if applicable) Any charges, other than authorized, will be disputed.
After acceptance the contractor will be contacted by an active cardholder and given an account number, which will accept the charges for material or services. The contractor’s point of contact for payment is:
Tel:
YM3 C500
MERCURY CONTROL (SUPPLIES)
Mercury or mercury containing compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract.
YM3 C528
SPECIFICATION CHANGES
No changes to specification or other contract technical requirements are allowed without Contracting Officer approval.
/PACKS SHALL AS A MINIMUM BE MARKED AS FOLLOWS:
| 1. | Applicable National Stock Number (NSN), Federal Stock Number (FSN), Local Stock Number (LSN), or Part Number, when neither NSN nor FSN or LSN are available. |
| 2. | Quantity |
| 3. | QA Designator: |
| 4. | Government Contract or Purchase Order Number (incl. Delivery Order No) |
| 5. | From: (Contractor’s Name and Address) |
| 6. | To: (Shipment Address) |
| 7. | Markings may be applied by any means, which provide legibility |
| 8. | Additional markings required are stated below: |
YM3 D2.2
MARKING OF SHIPMENTS ALT I
The contractor shall mark all shipments of military packaged items in accordance with MIL-STD-129 (Latest Revision) “Marking for Shipment and Storage” and all commercially packaged items in accordance with ASTM-D-3951 (Latest Revision) “Standard Practice for Commercial Packaging.
YM3 D4
PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
Preservation, packaging and packing shall be in accordance with ASTM Designation D-3951(Latest Revision), “Standard Practice for Commercial Packaging
YM3 D8
PROHIBITED PACKING MATERIALS
The use of asbestos or excelsior is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use.
YM3 E2
INSPECTION AND ACCEPTANCE (DESTINATION)
Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity. Receiving activity shall execute acceptance certificate on the applicable inspection and receiving report form: DD Form 1155, Standard Form 44, DD form 250, or the Wide Area Workflow (WAWF) Receipt and Acceptance Receiving Report. The executed payment copy shall be forwarded to the paying office within four (4) workdays thereafter.
YM3 E4
Disposition of Nonconforming Material
(1) Rejection of Material: In accordance with FAR 52.212-4(a), the Government reserves the right to reject supplies that are defective in material or workmanship, or otherwise nonconforming to contract requirements.
(2) PQDR Notification & Disposition: Upon determination of nonconformance, the Government will issue a Product Quality Deficiency Report (PQDR). The Contractor shall provide actionable disposition instructions to the Contracting Officer and the designated receiving activity within 90 days of PQDR issuance.
(3) Vendor Non-responsiveness: If the Contractor fails to provide disposition instructions or remains nonresponsive upon the expiration of the 90-day timeframe, the Government will exercise its right under FAR 52.212-4(a) to dispose of the material at the Contractor’s expense.
(4) Termination for Cause: Failure to provide actionable disposition instructions within the 90-day timeframe constitutes a failure to comply with contract terms and conditions. Such non-responsiveness may constitute grounds for the Contracting Officer to issue a Cure Notice or initiate Termination for Cause proceedings in accordance with FAR 52.212-4(m).
Quality Assurance Provision: Defect Reporting & Disposition Instructions
(a) In the event that material tendered for acceptance is rejected pursuant to FAR 52.212-4(a), the Government will issue a Product Quality Deficiency Report (PQDR).
(b) To satisfy the requirement for actionable disposition instructions required to resolve the PQDR, the Contractor’s response must constitute a formal Corrective Action communication. A simple acknowledgment is unacceptable. The disposition response must include, at a minimum, the following information:
1. Date of the report.
2. Purchase order or contract number.
3. Part Number and exact nomenclature.
4. Source of the defect.
5. Root cause origin of the failure in the process.
6. Immediate action taken to correct the specific defects.
7. Action taken or planned to prevent reoccurrence of the issue.
8. Identification of other products or shipments potentially affected.
9. Effective date of preventive actions.
10. Quality representative approval signature.
(Note: Acceptance of conforming material is not contingent upon this reporting. This QA provision is conditionally activated only upon Government issuance of a PQDR.)
YM3 F500
CONSIGNMENT INSTRUCTIONS FOR DELIVERIES TO THE PORTSMOUTH NAVAL SHIPYARD
Consign Parcel Post shipments to Portsmouth, NH 03801.
For access to the Portsmouth Naval Shipyard (PNS), contact PNS Security Pass Office at 207-438-2235/2614.
MARK SHIPPING DOCUMENTS: “Notify Receiving Officer, Portsmouth Naval Shipyard prior to arrival for delivery instructions. Telephone: 207-438-5521/5206”.
NOTICE: CARRIER’S DRIVERS ENTERING PORTSMOUTH NAVAL SHIPYARD MUST BE UNITED STATES CITIZENS BY BIRTH OR MUST CARRY EVIDENCE OF NATURALIZATION.
Except by special arrangement, shipments will be received only between the hours of 7:00 AM and 2:30 PM local time, Monday through Friday (Federal Holidays excepted).
YM3 K39
CERTIFICATION REGARDING ACTUAL MANUFACTURER
The offeror/contractor certifies that it [ ] is, [ ] is not (check one)the actual manufacturer of the item(s) covered by this solicitation/ contract.
The following information is to be provided by offerors/contractors who are not the actual manufacturer as explained above:
A. Actual Manufacturer(s) identification: If more than one, identify all,
| Name/Address |
| Actual Manufacturer’s Part No. or Other Descriptions |
B. Support effort performed by the offeror/contractor in addition to purchasing the item(s) for resale to the government.
| 1. Testing/Quality Assurance: [ ] Yes, [ ] No. |
| 2. Preservation, Packaging and Packing: [ ]Yes, [ ] No. |
| 3. Bar coding: [ ] Yes, [ ] No. |
| 4. Other (explain): _______________________________________________________ |
YM3 L3
COMMUNICATION WITH PORTSMOUTH NAVAL SHIPYARD - RFQ
Request For Quote (RFQ) information and amendments will be made available through the Internet via the SAM website which can be accessed at https://www.sam.gov. SAM lists business opportunities for the federal government including DLA Maritime - Portsmouth. Solicitations issued by DLA can be found by searching for the solicitation number or SPMYM3 in the Keyword / Solicitation # box. The cognizant DLA Contract Specialist or Purchasing Agent can be contacted at email address:
Rachel.j.mccluskey.civ@us.navy.mil
Quotes in response to this RFQ may be sent either electronically, via fax, or through the mail. Only proposals submitted in accordance with instructions of this solicitation will be accepted. Point of Contact information is as follows:
Address Rachel McCluskey, Code KME.RM DLA Weapons Support – Portsmouth Portsmouth Naval Shipyard Building 153, 6th Floor Kittery, ME 03904
Primary
| Name: | Rachel McCluskey |
| Tel: | 207-438-6818 |
| Email: | Rachel.j.mccluskey.civ@us.navy.mil |
It is the responsibility of the offeror to confirm that the agency has received their quotation by the solicitations closing date and time.
Potential Offerors will not automatically receive amendments to this solicitation and must check the FEDBIZOPPS website periodically to obtain any amendments. At a minimum, it is recommended that Offerors check on a weekly basis. Any amendments posted within five workdays of the scheduled closing date may include an extension to allow at least five workdays from the date when the amendment is posted to the closing date.
Offerors are REQUIRED to complete this entire RFQ package and submit the package as their quotation. All pages of this RFQ MUST be completed. Failure to provide this completed RFQ package may result in your quote being considered unresponsive.
YM3 M8
AWARD – SINGLE AWARD FOR ALL ITEMS
Due to the interrelationship of the items involved, the right is reserved to make a single award to the responsive offeror whose total proposal on all items is low.
File details come from the government source that posted it. Updated .