SPMYM327Q2007 Exhibit A.pdf
PDF 104 KB Posted
- Attached to
- ASSORTED CAP SCREWS (CMMC LEVEL 1 REQUIRED)
- Solicitation number
- SPMYM327Q2007
About this file
This is a Contract Data Requirements List (CDRL) for federal contract 62754101-3 specifying data submission requirements for LKG cap screws with 82-degree included angle fasteners. The CDRL identifies two required data items, both categorized as Technical Data Package (TDP) materials and assigned to requiring office Code 245.
Data Item A001 requires a Certificate of Compliance documenting certification of quality compliance, based on authority DI-MISC-81356A and referenced in contract Section C.2. Data Item A002 requires Certification Data/Report containing Chemical & Mechanical Certification, based on authority DI-MISC-82386 and referenced in contract Section C.3. Both data items must be submitted one time with the material delivery under separate shipment numbers, in accordance with FAR clauses 252.232-7006, 252.232-7003, or 52.232-36 for payment and submission. The A002 certification must include actual quantitative test results for all chemical and mechanical tests specified, with evidence of correct specimen testing. Fastener certification requires new untested fasteners for wedge tensile testing and yield strength testing. Distribution is limited (Statement A) with one final copy required for addressee 133.2 and no reproductions. The CDRL was prepared by Conrad Gagne on August 20, 2026, and approved by Jason Laflamme on November 2, 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses 8-28-2026.docx | DOCX document | |
| SPMYM327Q2007 RFQ.docx | DOCX document | |
| SPMYM327Q2007 Combined Synopsis Solicitation.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-1379-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
LKG CAP SCREW 82 DEGREE INCLUDED
ANGLE
E. CONTRACT/PR NO.
62754101-3
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C
H. DATE
08/20/2026
I. APPROVED BY 245.2
R e c o v e r a b l e S i g n a t u r e
X J a s o n L a f l a m m e
S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d
J. DATE
11/02/26
File details come from the government source that posted it. Updated .