Data Requirement.pdf
PDF 101 KB Posted
- Attached to
- Assorted Cap Screws
- Solicitation number
- SPMYM327Q1106
About this file
This is a Contract Data Requirements List (CDRL) for federal contract 62744091-4 that specifies mandatory data submissions for LKG cap screws with 82-degree included angle. The document outlines two required data items to be submitted by the contractor to the requiring office (Code 245).
Data Item A001 requires submission of a Certificate of Compliance certifying quality compliance, referenced to specification section C.2 and data item description DI-MISC-81356A. Data Item A002 requires Certification Data/Report containing chemical and mechanical certification test results, referenced to specification section C.3 and data item description DI-MISC-82386. Both items must be submitted one time with the material delivery under separate shipment numbers. Key submission requirements for A002 include: actual quantitative test results in units specified, evidence of testing the correct number of fastener specimens, new untested fasteners for wedge tensile and yield strength testing, and compliance with contract section "Marking and Certification requirements for Controlled Industrial Material." Payment and submission are governed by Federal Acquisition Regulation clauses 252.232-7006, 252.232-7003, or 52.232-36. The document was prepared by Conrad Gagne (extension 6797) on July 15, 2026, and approved by Edward Walsh on October 24, 2026. Distribution statements are marked as required (Statement A), and one copy of each final data item is required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses Revised.pdf | ||
| Clauses - Full Text Provisions and Clauses.pdf | ||
| RFQ SPMYM327Q1106.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-1134-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
LKG CAP SCREW 82 DEGREE INCLUDED
ANGLE
E. CONTRACT/PR NO.
62744091-4
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C
H. DATE
07/15/2026
I. APPROVED BY 245.2
R e c o v e r a b l e S i g n a t u r e
X E D W A R D W A L S H
S i g n e d b y : d 2 9 9 6 f a c - 5 2 c 0 - 4 6 b 8 - 8 d 1 d - c b 9 9 6 9 5 2 1 4 8 b
J. DATE
10-24-2026
File details come from the government source that posted it. Updated .