Exhibits.pdf
PDF 324 KB Posted
- Attached to
- Screws and Nuts
- Solicitation number
- SPMYM326Q5066
About this file
This is a Contract Data Requirements List (DD Form 1423-1) documenting data submission requirements for multiple contract line items associated with stud fasteners under contract SPMYM326Q5056 for the system/item designation "STUD." The document specifies two primary data item requirements that repeat across seven contract line items (A through G, each containing two data items): Data Item A001/B001/C001/D001/E001/F001/G001 requires submission of a Certificate of Compliance (Authority DI-MISC-81356A, Section C.2) as certification of quality, and Data Items A002/B002/C002/D002/E002/F002/G002 require Certification Data/Report for Chemical & Mechanical Certification (Authority DI-MISC-82386, Section C.3).
All data submissions are required on a one-time basis, with distribution to Code 245 (requiring office) in final form using Distribution Statement A. Each data item must be submitted with material under separate shipment numbers, and certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each material shipment. The certification data shall contain actual test results of all chemical and mechanical tests required by the specification in quantitative units, with paragraphs 6 and 8 of DI-MISC-82386 explicitly excluded from applicability. Payment and submission are governed by FAR clauses 252.232-7006, 252.232-7003, or 52.232-36. The document was prepared by Lars A. Willis on 05/21/2026 and approved by Jason Laflamme on 06/01/2026 under code 245.2.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ 26Q5066.pdf | ||
| Clauses - Full Text Provisions and Clauses 260210.pdf | ||
| Security Agreement For Protection of NNPI.pdf | ||
| Combined Synopsis 26Q5066.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2L-0811-26 (2 DATA ITEMS)
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0002/0003
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
B001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
B0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0005/0006
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
C001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
C0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0008/0009
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
D001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
D0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0011/0012
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
E001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
E0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0014/0015
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
F001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
F0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0017/0018
A. CONTRACT LINE-ITEM NO. B. EXHIBIT C. CATEGORY
A TDP ...x.. TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
STUD SPMYM326Q5056
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
G001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
G0 02 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C.3 CODE245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & 15. TOTAL 0 1 0 mechanical test(s) required by the specification.
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 and 252.232-7003 or
52.232-36. Certification data shall be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment of material. Each data item submitted by vendor must be submitted under separate shipment number. No material is to be shipped prior to the receipt of Acceptance.
6. In addition to the certification data requirements specified in DI-MISC-82386, the requirements of the contract section titled, "Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
� R o,a ,otohl• Slg n otu ,, LARS A. WILLIS 05/21/2026 X Ja s o n L a fl• m m e 06/01/2026
S j 9 n • d b y : Z r h • O � c e • • l b > • • • � d • e , 8 I· l b � l • d • 2 I , e d
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 1
0020/0021
File details come from the government source that posted it. Updated .