Additional Information for Material.docx
DOCX document 14 KB Posted
- Solicitation number
- SPMYM325Q6045xx
About this file
This document is an Additional Information file for a material procurement solicitation issued by the Defense Logistics Agency Land and Maritime. The solicitation (SPMYM325Q6045xx) seeks 40 aluminum abrasive deck plates measuring 4ft x 8ft, with a thickness of .375", conforming to RR-T-650E specifications. The procurement is a 100% small business set-aside using Lowest Price Technically Acceptable (LPTA) evaluation criteria, with responses due by 3pm EST on 6/2/2025.
The additional material information details installation requirements, including cutting, drilling, chamfering, and bolting specifications. Vendors must provide descriptive literature demonstrating compliance with specifications and complete several required provisions, including representations related to cybersecurity, telecommunications, and supply chain security. Quotations must be submitted via email to Jannell Moriarty, with vendors required to be registered in the System for Award Management (SAM). Payment terms are Net 30 days after material acceptance, with options for Government Commercial Purchase Card or Wide Area Workflow payment methods.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 25Q6045xx RFQ Required.docx | DOCX document | |
| Additional Information for Material.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 250423.docx | DOCX document | |
| 25Q6045xx RFQ Required.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Additional Information for Material
Are you installing full sheets? NO
If so, how is your installation? We will cut to suit/drill/chamfer and bolt as needed
Bolting - if so - do you need counter sunk holes or thru holes? How many? NO, We will do this
Welding – if so - do you need masking? NO, N/A
If you are installing side by side, would you need it squared off or beveled? Either is fine. We will chamfer the newly cut edges to suit existing edges, or we will break edges on all sides if left square.
What aluminum alloy do you need for this job? Material shall be in accordance with RR-T-650E. If they are unable able to provide the required material, we would need to know what they are proposing to use in order to do a technical evaluation on that specific material.
4’x4’ plate sizes are fine. If so, we would need to increase pieces to 90 to account for waste.
File details come from the government source that posted it. Updated .