SPMYM325Q3135 Exhibit A.pdf
PDF 103 KB Posted
- Attached to
- Capscrew Flat Head Socket, K-Monel
- Solicitation number
- SPMYM325Q3135
About this file
This document is a Contract Data Requirements List (CDRL) for a naval contract solicitation for Flat Head Socket Capscrews in K-Monel material. The solicitation (SPMYM325Q3135) is issued by the Defense Logistics Agency Land and Maritime and is a Small Business Set Aside procurement using Lowest Price Technically Acceptable (LPTA) evaluation criteria. The solicitation covers two Contract Line Items (CLINs): CLIN 0001 for Flat Head Socket Capscrews and two associated data requirement CLINs for Certificate of Compliance and Certification Data/Report.
Key details include a response deadline of 3:00 PM EST on 7/24/2024, submission via email to Emily.Kritzman@dla.mil, and mandatory SAM registration for potential vendors. The procurement requires vendors to submit descriptive literature demonstrating specification compliance, with potential rejection for incomplete submissions. Payment terms are Net 30 days after material acceptance, and vendors can choose between Government Commercial Purchase Card or Wide Area Workflow payment methods. The solicitation includes multiple federal acquisition regulations and provisions, with a focus on small business participation and specific technical requirements for capscrew manufacturing.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM325Q3135 Clauses Full Text.docx | DOCX document | |
| SPMYM325Q3135 RFQ Capscrews K.docx | DOCX document | |
| SPMYM325Q3135 Attachment 1 Spec.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .